Research Article
Titanium Alloy Repair with Wire-Feed Electron Beam Additive Manufacturing Technology
Figure 1
(a) Schematic showing the coupon geometry: RD in the Ti6Al4V substrate and DD during EBAM and thermocouple locations, (b) the five types of tensile specimens extracted from the Ti6Al4V deposits with their geometry, and (c) the fatigue specimens extracted from the Ti6Al4V deposits and PM with their geometry. It is noteworthy that the PMX and PMZ tensile and fatigue samples were extracted from SRed Ti6Al4V plates (75 mm in height), and their representation in (b) and (c) are intended for illustrating the sample orientation only.
| (a) |
| (b) |
| (c) |