Research Article
Study on Simulation of Stamping Process and Optimization of Process Parameters of Fender
Table 4
Influence of various factors on maximum thinning rate.
| | A | B | C | D |
| K1 | 139.03 | 144.07 | 145.28 | 149.12 | K2 | 145.13 | 141.23 | 146.78 | 149.38 | K3 | 139.82 | 140.13 | 148.52 | 149.51 | K4 | 149.91 | 140.20 | 148.88 | 151.74 | k1 = K1/5 | 27.91 | 29.11 | 29.74 | 30.12 | k2 = K2/5 | 29.37 | 29.05 | 29.45 | 28.99 | k3 = K3/5 | 29.26 | 28.11 | 29.12 | 29.82 | k4 = K4/5 | 31.26 | 27.06 | 29.88 | 30.45 | R | 7.74 | 3.51 | 1.47 | 1.96 | Rank | 1 | 2 | 4 | 3 |
|
|