Experimental Study on Water-Jet Shock Microforming Process Using Different Incident Pressures

<table class="table-group" id="tab2"><tr><td><table class="table"><tr><td class="thead-hr" colspan="5"><hr/></td></tr><tr class="thead"><td class="align_left">Elastic modulus (GPa)</td><td class="align_center">Poisson ratio</td><td class="align_center">Yield strength (MPa)</td><td class="align_center">Tensile strength (MPa)</td><td class="align_center">Elongation (%)</td></tr><tr><td class="thead-hr" colspan="5"><hr/></td></tr><tr><td class="align_left">194</td><td class="align_center">0.3</td><td class="align_center">≥205</td><td class="align_center">≥520</td><td class="align_center">≤40</td></tr><tr class="table-tr"><td colspan="5"><hr class="tbody-hr"/></td></tr></table></td></tr></table>

<div>Mechanical properties of 304 stainless steel.</div>

Advances in Materials Science and Engineering

tab2

Table 2

Table 2: Experimental Study on Water-Jet Shock Microforming Process Using Different Incident Pressures 