Studying and Optimizing the Effect of Process Parameters on Machining Vibration in Turning Process of AISI 1040 Steel

Table 10

Best condition for achieving the optimum vibration and chip frequency by Minitab optimizer, TS, and SA.

Parameter	Method
	Minitab optimizer	TS	SA
Cutting speed (mm/s)	50	50	50
Depth of cut (mm)	0.79	0.79	0.79
Feed rate (ft./rot)	0.8	0.8	0.8
Vibration (Volt)	−0.076	−0.076	−0.076
Chip frequency (Hz)	−10193	−10193	−10193