Research Article
Multiobjective Optimization of Milling Parameters for Ultrahigh-Strength Steel AF1410 Based on the NSGA-II Method
Table 3
Independent variables and the levels.
| | Independent variables | Levels | | ā1 | 0 | 1 |
| | Milling speed (m/min) | 12.56 | 18.84 | 25.12 | | Feed per tooth fz (mm/z) | 0.02 | 0.04 | 0.06 | | Axial depth of cut ap (mm) | 1 | 3 | 5 | | Radial depth of cut ae (mm) | 0.5 | 1.25 | 2 |
|
|
