Research Article
Statistical Modelling to Study the Implications of Coated Tools for Machining AA 2014 Using Grey Taguchi-Based Response Surface Methodology
Table 17
Calculation of Grey Relational Grade (GRG) values.
| Exp. order | S/N ratio | Normalized S/N ratio | GRC | GRG | MRR | Torque | Thrust force | MRR | Torque | Thrust force | MRR | Torque | Thrust force |
| 1 | 13.5904 | −8.1254 | 39.3883 | 0 | 0.415 | 0.2119 | 1 | 0.6584 | 0.7906 | 0.8163 | 2 | 15.0071 | −10.624 | 37.8952 | 0.106 | 0 | 0 | 0.883 | 1 | 1 | 0.961 | 3 | 14.3251 | −8.6854 | 40.2572 | 0.055 | 0.322 | 0.3353 | 0.9357 | 0.7129 | 0.7047 | 0.7844 | 4 | 19.1913 | −9.2840 | 38.9182 | 0.4197 | 0.223 | 0.1452 | 0.6559 | 0.782 | 0.8464 | 0.7614 | 5 | 20.3848 | −7.5973 | 37.8952 | 0.509 | 0.5028 | 0 | 0.6112 | 0.614 | 1 | 0.7417 | 6 | 22.1136 | −7.1014 | 41.7719 | 0.639 | 0.585 | 0.5504 | 0.556 | 0.5776 | 0.5924 | 0.5753 | 7 | 25.2357 | −5.3586 | 41.4170 | 0.873 | 0.875 | 0.5 | 0.4782 | 0.4776 | 0.6154 | 0.5237 | 8 | 25.9056 | −4.6036 | 44.9388 | 0.923 | 1 | 1 | 0.4643 | 0.444 | 0.444 | 0.4508 | 9 | 26.9357 | −7.9112 | 42.1122 | 1 | 0.4506 | 0.5987 | 0.444 | 0.6397 | 0.5720 | 0.5519 | Min. | 13.5904 | −10.624 | 37.8952 | | | | | | | | Max. | 26.9357 | −4.6036 | 44.9388 | | | | | | | | Delta | 13.3453 | 6.0206 | 7.0436 | | | | | | | |
|
|
The larger the better–material removal rate, torque, and thrust force. |