Review Article
A Cutting-Edge Survey of Tribological Behavior Evaluation Using Artificial and Computational Intelligence Models
Table 5
Comparison of materials with other types of wear tests and the results observed.
| Materials used | Tests performed | Results observed | Ref. |
| Epoxy resin Carbon nanotubes | Ball-on-prism tribometer | Wear resistance was improved when CNTs were combined with an EP matrix. | [38] | Cemented carbide tools | Disc turning test | The most prevalent wear mechanisms observed were built-up edge, adherent layer, and diffusion. | [39] | Nylon gears and acetal gears | Back-to-back test configuration | The wear characteristics of nylon gears vary significantly from those of acetal gears. | [40] | Ni-SiC composites | Ring-on-disc test | With the increase in the percentage of SiC, the wear resistance of the deposited layer increases. | [41] |
|
|