Research Article
Study on Injection Molding Process Simulation and Process Parameter Optimization of Automobile Instrument Light Guiding Support
Table 6
Results of the variance analysis.
| Optimization objective | Sources of variance | Sum of squares of deviations/Sa | Degrees of freedom/fa | The mean square value/ | Influence degree P (%) |
| Shrinkage rate | A | 0.255 | 3 | 0.085 | 1.84 | B | 2.584 | 3 | 0.861 | 18.69 | C | 0.211 | 3 | 0.070 | 1.53 | D | 0.378 | 3 | 0.126 | 2.73 | E | 10.395 | 3 | 3.465 | 75.2 | Se | 13.823 | 15 | | |
| Amount of warping | A | 0.0067 | 3 | 0.0022 | 1.05 | B | 0.1546 | 3 | 0.0515 | 24.29 | C | 0.3033 | 3 | 0.1011 | 47.66 | D | 0.0912 | 3 | 0.0304 | 14.33 | E | 0.0806 | 3 | 0.0269 | 12.66 | Se | 0.6364 | 15 | | |
|
|