Research Article
Study on Injection Molding Process Simulation and Process Parameter Optimization of Automobile Instrument Light Guiding Support
Table 9
Comparison of quality evaluation indices of the Taguchi orthogonal test and the grey correlation degree.
| Index | Influence factors | Process parameter combination | Volume shrinkage (%) | Amount of warping (mm) |
| Warpage amount analysis based on Taguchi orthogonal test | C > B > D > E > A | A1B1C2D4E4 | 6.721 | 2.001 | Volume shrinkage rate analysis based on Taguchi orthogonal test | E > B > D > A > C | A4B4C1D4E1 | 12.56 | 1.763 | Grey correlation analysis | E > D > A > B > C | A1B1C4D4E4 | 6.753 | 1.999 |
|
|
Note: A is mold temperature, B is melt temperature, C is cooling time, D is packing pressure, and E is packing time.
|