Research Article
Examination of Machining Parameters and Prediction of Cutting Velocity and Surface Roughness Using RSM and ANN Using WEDM of Altemp HX
| Parameter | Specifications |
| Wire diameter (mm) | 0.25 | Wire material | Zinc coated copper wire | Dielectric fluid | Deionized water | Pulse on time (μs) | 105, 110, 115, 120, 125 | Servo gap voltage (V) | 35, 40, 45, 50, 55 | Wire span feed (m/min) | 4 | Servo feed (mm/min) | 20 | Pulse off time (μs) | 33 |
|
|