Research Article
DEFORM 3D Simulations and Taguchi Analysis in Dry Turning of 35CND16 Steel
Table 9
Optimum factors and machining characteristics: confirmation by simulation.
| Optimal conditions | Cutting force (N) | Temperature generation (°C) | Experimental values | Simulated values | Experimental values | Simulated values |
| V:150 m/min, S: 0.15 mm/rev, ap: 1.25 mm (for cutting force) | 285 | 280 | — | — | V: 60 m/min, S: 0.15 mm/revap: 0.75 mm (for temperature generation) | — | — | 445 | 455 |
|
|