About this Journal Submit a Manuscript Table of Contents

Citations to this Journal [2,969 citations: 1–100 of 2,809 articles]

Articles published in Advances in Materials Science and Engineering have been cited 2,969 times. The following is a list of the 2,809 articles that have cited the articles published in Advances in Materials Science and Engineering.

  • Susmita Dolai, Susanta Kumar Bhunia, Stella S. Beglaryan, Sofiya Kolusheva, Leila Zeiri, and Raz Jelinek, “Colorimetric Polydiacetylene–Aerogel Detector for Volatile Organic Compounds (VOCs),” ACS Applied Materials & Interfaces, 2017. View at Publisher · View at Google Scholar
  • Hendrik Naatz, Sijie Lin, Ruibin Li, Wen Jiang, Zhaoxia Ji, Chong Hyun Chang, Jan Köser, Jorg Thöming, Tian Xia, Andre E. Nel, Lutz Mädler, and Suman Pokhrel, “ Safe-by-Design CuO Nanoparticles via Fe-Doping, Cu–O Bond Length Variation, and Biological Assessment in Cells and Zebrafish Embryos ,” ACS Nano, 2017. View at Publisher · View at Google Scholar
  • Georgios I. Giannopoulos, and Stylianos K. Georgantzinos, “Establishing detection maps for carbon nanotube mass sensors: molecular versus continuum mechanics,” Acta Mechanica, 2017. View at Publisher · View at Google Scholar
  • Andrea Luca Tasca, Farnaz Ghajeri, and Ashleigh J Fletcher, “Novel hydrophilic and hydrophobic amorphous silica: Characterization and adsorption of aqueous phase organic compounds,” Adsorption Science & Technology, pp. 026361741769233, 2017. View at Publisher · View at Google Scholar
  • Borano Te, Boonchai Wichitsathian, Chatpet Yossapol, and Watcharapol Wonglertarak, “Development of low-cost iron mixed porous pellet adsorbent by mixture design approach and its application for arsenate and arsenite adsorption from water,” Adsorption Science & Technology, pp. 026361741769362, 2017. View at Publisher · View at Google Scholar
  • Mohammed Sabah Ali, M. A. Azmah Hanim, S. M. Tahir, C. N. A. Jaafar, Norkhairunnisa Mazlan, and Khamirul Amin Matori, “The Effect of Commercial Rice Husk Ash Additives on the Porosity, Mechanical Properties, and Microstructure of Alumina Ceramics,” Advances in Materials Science and Engineering, vol. 2017, pp. 1–10, 2017. View at Publisher · View at Google Scholar
  • Nitin D. Misal, and Mudigonda Sadaiah, “Investigation on Surface Roughness of Inconel 718 in Photochemical Machining,” Advances in Materials Science and Engineering, vol. 2017, pp. 1–9, 2017. View at Publisher · View at Google Scholar
  • Ying Gao, Qinglin Guo, Yanhua Guo, Pingchuan Wu, Wenqing Meng, and Tongye Jia, “Investigation on Reinforced Mechanism of Fiber Reinforced Asphalt Concrete Based on Micromechanical Modeling,” Advances in Materials Science and Engineering, vol. 2017, pp. 1–12, 2017. View at Publisher · View at Google Scholar
  • Yu-jiang Zhang, Guo-rui Feng, and Ting-ye Qi, “Experimental Research on Internal Behaviors of Caved Rocks under the Uniaxial Confined Compression,” Advances in Materials Science and Engineering, vol. 2017, pp. 1–8, 2017. View at Publisher · View at Google Scholar
  • Stefan Flege, Ruriko Hatada, Andreas Hanauer, Wolfgang Ensinger, Takao Morimura, and Koumei Baba, “Preparation of Metal-Containing Diamond-Like Carbon Films by Magnetron Sputtering and Plasma Source Ion Implantation and Their Properties,” Advances in Materials Science and Engineering, vol. 2017, pp. 1–8, 2017. View at Publisher · View at Google Scholar
  • Eman Alzahrani, “Photodegradation of Binary Azo Dyes Using Core-Shell Fe<sub>3</sub>O<sub>4</sub>/SiO<sub>2</sub>/TiO<sub>2</sub> Nanospheres,” American Journal of Analytical Chemistry, vol. 08, no. 01, pp. 95–115, 2017. View at Publisher · View at Google Scholar
  • Khai Hee Or, Azma Putra, and Mohd Zulkefli Selamat, “Oil palm empty fruit bunch fibres as sustainable acoustic absorber,” Applied Acoustics, vol. 119, pp. 9–16, 2017. View at Publisher · View at Google Scholar
  • K.K. Alaneme, and M.O. Bodunrin, “Self-healing using metallic material systems – A review,” Applied Materials Today, vol. 6, pp. 9–15, 2017. View at Publisher · View at Google Scholar
  • Junjie Ye, Chenchen Chu, Zhi Zhai, Yongkun Wang, Baoquan Shi, and Yuanying Qiu, “The Interphase Influences on the Particle-Reinforced Composites with Periodic Particle Configuration,” Applied Sciences, vol. 7, no. 1, pp. 102, 2017. View at Publisher · View at Google Scholar
  • M. Maria Angelin Sinthiya, K. Ramamurthi, K. Sethuraman, and R. Ramesh Babu, “Morphologically tuned 3D/1D rutile TiO2 hierarchical hybrid microarchitectures engineered by one-step surfactant free hydrothermal method,” Applied Surface Science, 2017. View at Publisher · View at Google Scholar
  • Usman Yaqoob, A.S.M. Iftekhar Uddin, and Gwiy-Sang Chung, “A novel tri-layer flexible piezoelectric nanogenerator based on surface- modified graphene and PVDF-BaTiO3 nanocomposites,” Applied Surface Science, 2017. View at Publisher · View at Google Scholar
  • Wuze Xie, Shujie Jiao, Dongbo Wang, Shiyong Gao, Jinzhong Wang, Qingjiang Yu, and Hongtao Li, “The effect of sputtering gas pressure on the structure and optical properties of MgNiO films grown by radio frequency magnetron sputtering,” Applied Surface Science, 2017. View at Publisher · View at Google Scholar
  • Jianqiu Huang, Eric Tea, Guanchen Li, and Celine Hin, “Hydrogen release at metal-oxide interfaces: A first principle study of hydrogenated Al/SiO2 interfaces,” Applied Surface Science, 2017. View at Publisher · View at Google Scholar
  • Hu Zhang, Wen-Zhen Fang, Yue-Ming Li, and Wen-Quan Tao, “Experimental study of the thermal conductivity of polyurethane foams,” Applied Thermal Engineering, 2017. View at Publisher · View at Google Scholar
  • Mateusz Morawiec, Maciej Różański, Adam Grajcar, and Sebastian Stano, “Effect of dual beam laser welding on microstructure–property relationships of hot-rolled complex phase steel sheets,” Archives of Civil and Mechanical Engineering, vol. 17, no. 1, pp. 145–153, 2017. View at Publisher · View at Google Scholar
  • Jianxin Ma, and Frank Dehn, “Schwind- und Kriechverhalten von Beton auf Basis eines alkalisch-aktivierten Hüttensands,” Beton- und Stahlbetonbau, vol. 112, no. 1, pp. 22–30, 2017. View at Publisher · View at Google Scholar
  • Anny Leudjo Taka, Kriveshini Pillay, and Xavier Yangkou Mbianda, “Nanosponge cyclodextrin polyurethanes and their modification with nanomaterials for the removal of pollutants from waste water: A review,” Carbohydrate Polymers, vol. 159, pp. 94–107, 2017. View at Publisher · View at Google Scholar
  • Changjie Chen, Guicui Chen, Xin Li, Hongyun Guo, and Guohe Wang, “The influence of chemical treatment on the mechanical properties of windmill palm fiber,” Cellulose, 2017. View at Publisher · View at Google Scholar
  • Wenlei Song, Yongteng Zhong, and Jiawei Xiang, “Mechanical parameters identification for laminated composites based on the impulse excitation technique,” Composite Structures, vol. 162, pp. 255–260, 2017. View at Publisher · View at Google Scholar
  • Rongqiao Wang, Long Zhang, Dianyin Hu, Chunhui Liu, Xiuli Shen, Chongdu Cho, and Bo Li, “A novel approach to impose periodic boundary condition on braided composite RVE model based on RPIM,” Composite Structures, vol. 163, pp. 77–88, 2017. View at Publisher · View at Google Scholar
  • Hamidreza Hoshyarmanesh, Hamid Rezvanı Dastgerdi, Mojtaba Ghodsi, Rasoul Khandan, and Kourosh Zareinia, “Numerical and experimental vibration analysis of olive tree for optimal mechanized harvesting efficiency and productivity,” Computers and Electronics in Agriculture, vol. 132, pp. 34–48, 2017. View at Publisher · View at Google Scholar
  • Tung-Chai Ling, Ning Li, Xiaoying Pan, Zhenguo Shi, and Caijun Shi, “A review on concrete surface treatment Part I: Types and mechanisms,” Construction and Building Materials, vol. 132, pp. 578–590, 2017. View at Publisher · View at Google Scholar
  • Iqbal Marie, “Thermal conductivity of hybrid recycled aggregate – Rubberized concrete,” Construction and Building Materials, vol. 133, pp. 516–524, 2017. View at Publisher · View at Google Scholar
  • M.R. Karim, M.M. Hossain, M.F.M. Zain, M. Jamil, and F.C. Lai, “Durability properties of a non-cement binder made up of pozzolans with sodium hydroxide,” Construction and Building Materials, vol. 138, pp. 174–184, 2017. View at Publisher · View at Google Scholar
  • Maeva Borel, Mathias Dodin, T. Jean Daou, Nicolas Bats, Bogdan Harbuzaru, and Joël Patarin, “SDA-Free Hydrothermal Synthesis of High-Silica Ultra-nanosized Zeolite Y,” Crystal Growth & Design, 2017. View at Publisher · View at Google Scholar
  • Abdulla Jabr, Amr El-Ragaby, and Faouzi Ghrib, “Effect of the Fiber Type and Axial Stiffness of FRCM on the Flexural Strengthening of RC Beams,” Fibers, vol. 5, no. 1, pp. 2, 2017. View at Publisher · View at Google Scholar
  • Yanping Xu, Ping Lu, Liang Chen, and Xiaoyi Bao, “Recent Developments in Micro-Structured Fiber Optic Sensors,” Fibers, vol. 5, no. 1, pp. 3, 2017. View at Publisher · View at Google Scholar
  • Ahmed Edhirej, S. M. Sapuan, Mohammad Jawaid, and Nur Ismarrubie Zahari, “Preparation and characterization of cassava bagasse reinforced thermoplastic cassava starch,” Fibers and Polymers, vol. 18, no. 1, pp. 162–171, 2017. View at Publisher · View at Google Scholar
  • Markus Schmid, Tobias K. Prinz, Andreas Stäbler, and Sven Sängerlaub, “Effect of Sodium Sulfite, Sodium Dodecyl Sulfate, and Urea on the Molecular Interactions and Properties of Whey Protein Isolate-Based Films,” Frontiers in Chemistry, vol. 4, 2017. View at Publisher · View at Google Scholar
  • Jiah Chee Soh, Soo Ling Chong, Sk Safdar Hossain, and Chin Kui Cheng, “Catalytic ethylene production from ethanol dehydration over non-modified and phosphoric acid modified Zeolite H-Y (80) catalysts,” Fuel Processing Technology, vol. 158, pp. 85–95, 2017. View at Publisher · View at Google Scholar
  • Maciej Sienkiewicz, Kaja Borzędowska-Labuda, Artur Wojtkiewicz, and Helena Janik, “Development of methods improving storage stability of bitumen modified with ground tire rubber: A review,” Fuel Processing Technology, vol. 159, pp. 272–279, 2017. View at Publisher · View at Google Scholar
  • S. Seghers, L. Protasova, S. Mullens, J. W. Thybaut, and C. V. Stevens, “Improving the efficiency of the Diels–Alder process by using flow chemistry and zeolite catalysis,” Green Chem., 2017. View at Publisher · View at Google Scholar
  • Li Yin Wong, Wan Zuhainis Saad, Rosfarizan Mohamad, and Paridah Md. Tahir, “Optimization of cultural conditions for polygalacturonase production by a newly isolated Aspergillus fumigatus R6 capable of retting kenaf,” Industrial Crops and Products, vol. 97, pp. 175–183, 2017. View at Publisher · View at Google Scholar
  • Joanna Barton-Pudlik, Krystyna Czaja, Marek Grzymek, and Jacek Lipok, “Evaluation of wood-polyethylene composites biodegradability caused by filamentous fungi,” International Biodeterioration & Biodegradation, vol. 118, pp. 10–18, 2017. View at Publisher · View at Google Scholar
  • S. Saravanan, Anjali C., M. Vairamani, T.P. Sastry, K.S. Subramanian, and N. Selvamurugan, “Scaffolds containing Chitosan, Gelatin and Graphene Oxide for Bone Tissue Regeneration in vitro and in vivo,” International Journal of Biological Macromolecules, 2017. View at Publisher · View at Google Scholar
  • Zeng-Yao Li, Chuan-Yong Zhu, and Xin-Peng Zhao, “A theoretical and numerical study on the gas-contributed thermal conductivity in aerogel,” International Journal of Heat and Mass Transfer, vol. 108, pp. 1982–1990, 2017. View at Publisher · View at Google Scholar
  • Lin-Zhi Wang, and Wen-Hou Wei, “Microstructure and mechanical properties of carbon nanotube-reinforced ZK61 magnesium alloy composites prepared by spark plasma sintering,” International Journal of Materials Research, 2017. View at Publisher · View at Google Scholar
  • Myeong Jin Kim, Hong Jin Choi, Jongman Cho, Jung Bok Lee, Hak-Joon Sung, and Jeong Koo Kim, “MG-63 Cell Proliferation with Static or Dynamic Compressive Stimulation on an Auxetic PLGA Scaffold,” International Journal of Polymer Science, vol. 2017, pp. 1–6, 2017. View at Publisher · View at Google Scholar
  • K. B. Mustapha, Z. W. Zhong, and S. B. A. Kashem, “Vibration Behavior of Gravity-Loaded Whirling Micro-Scale Shafts Influenced by an Axial Magnetic Field,” International Journal of Structural Stability and Dynamics, pp. 1750110, 2017. View at Publisher · View at Google Scholar
  • Mohammad Hamed Fasihnikoutalab, Afshin Asadi, Cise Unluer, Bujang Kim Huat, Richard J. Ball, and Shahram Pourakbar, “Utilization of Alkali-Activated Olivine in Soil Stabilization and the Effect of Carbonation on Unconfined Compressive Strength and Microstructure,” J. Mater. Civ. Eng., pp. 06017002, 2017. View at Publisher · View at Google Scholar
  • Ammar Azam, Aamir Mubashar, Ian Anthony Ashcroft, Emad Uddin, and Syed Husain Imarn Jaffery, “A numerical study of the effect of ply-layup on the strength and stiffness of a composite T-joint under three point bending,” Journal of Adhesion Science and Technology, pp. 1–15, 2017. View at Publisher · View at Google Scholar
  • Elbadawy A. Kamoun, El-Refaie S. Kenawy, and Xin Chen, “A review on polymeric hydrogel membranes for wound dressing applications: PVA-based hydrogel dressings,” Journal of Advanced Research, 2017. View at Publisher · View at Google Scholar
  • Rohit J. Jacob, Diana L. Ortiz-Montalvo, Kyle R. Overdeep, Timothy P. Weihs, and Michael R. Zachariah, “Incomplete reactions in nanothermite composites,” Journal of Applied Physics, vol. 121, no. 5, pp. 054307, 2017. View at Publisher · View at Google Scholar
  • Wei Sun, Zhen Zhou, Jin Luo, Ke Wang, and Jing-Feng Li, “ Leakage current characteristics and Sm/Ti doping effect in BiFeO 3 thin films on silicon wafers ,” Journal of Applied Physics, vol. 121, no. 6, pp. 064101, 2017. View at Publisher · View at Google Scholar
  • Kosuke Tsuji, Wei-Ting Chen, Hanzheng Guo, Wen-Hsi Lee, Sophie Guillemet-Fritsch, and Clive A. Randall, “ Contrasting conduction mechanisms of two internal barrier layer capacitors: (Mn, Nb)-doped SrTiO 3 and CaCu 3 Ti 4 O 12 ,” Journal of Applied Physics, vol. 121, no. 6, pp. 064107, 2017. View at Publisher · View at Google Scholar
  • Pollawat Charoeythornkhajhornchai, Chavakorn Samthong, and Anongnat Somwangthanaroj, “Influence of sulfenamide accelerators on cure kinetics and properties of natural rubber foam,” Journal of Applied Polymer Science, 2017. View at Publisher · View at Google Scholar
  • Paulo F. R. Ortega, João Paulo C. Trigueiro, Merly R. Santos, Ângelo M. L. Denadai, Luiz Carlos A. Oliveira, Ana Paula C. Teixeira, Glaura G. Silva, and Rodrigo L. Lavall, “Thermodynamic Study of Methylene Blue Adsorption on Carbon Nanotubes Using Isothermal Titration Calorimetry: A Simple and Rigorous Approach,” Journal of Chemical & Engineering Data, 2017. View at Publisher · View at Google Scholar
  • Humayun Nadeem, Noor Zainab Habib, Ng Choon Aun, Salah Elias Zoorob, Zahiraniza Mustaffa, Swee Yong Chee, and Muhammad Younas, “Utilization of catalyzed waste vegetable oil as a binder for the production of environmentally friendly roofing tiles,” Journal of Cleaner Production, 2017. View at Publisher · View at Google Scholar
  • Dachuan Jiang, Shiqiang Qin, Pengting Li, Shuang Shi, Shutao Wen, and Yi Tan, “Electromagnetic separation of silicon carbide inclusions with aluminum penetration in silicon by imposition of supersonic frequency magnetic field,” Journal of Cleaner Production, 2017. View at Publisher · View at Google Scholar
  • Mohammed Shariq, Peter Majerič, Bernd Friedrich, Bojan Budic, Darja Jenko, Amit Rai Dixit, and Rebeka Rudolf, “Application of Gold(III) Acetate as a New Precursor for the Synthesis of Gold Nanoparticles in PEG Through Ultrasonic Spray Pyrolysis,” Journal of Cluster Science, 2017. View at Publisher · View at Google Scholar
  • Rongqiao Wang, Long Zhang, Dianyin Hu, and Chongdu Cho, “Evaluation of three unit cell models in predicting the mechanical behaviour of 3D four-directional braided composites,” Journal of Composite Materials, pp. 002199831769265, 2017. View at Publisher · View at Google Scholar
  • Tholiso Ngulube, Jabulani Ray Gumbo, Vhahangwele Masindi, and Arjun Maity, “An update on synthetic dyes adsorption onto clay based minerals: A state-of-art review,” Journal of Environmental Management, vol. 191, pp. 35–57, 2017. View at Publisher · View at Google Scholar
  • L. Firman, N. A. Ochoa, J. Marchese, and C. Pagliero, “Simultaneous improvement in solvent permeability and deacidification of soybean oil by nanofiltration,” Journal of Food Science and Technology, 2017. View at Publisher · View at Google Scholar
  • J.F. Ciparisse, A. Malizia, L.A. Poggi, F. Tieri, M. Gelfusa, A. Murari, C. Del Papa, I. Giovannangeli, and P. Gaudio, “3D numerical simulations of a LOVA reproduction inside the new facility STARDUST-UPGRADE,” Journal of Instrumentation, vol. 12, no. 02, pp. C02001–C02001, 2017. View at Publisher · View at Google Scholar
  • Iraj Kazeminezhad, and Saba Mosivand, “Elimination of copper and nickel from wastewater by electrooxidation method,” Journal of Magnetism and Magnetic Materials, vol. 422, pp. 84–92, 2017. View at Publisher · View at Google Scholar
  • Miroslav Sahul, Martin Sahul, Maroš Vyskoč, Ľubomír Čaplovič, and Matej Pašák, “Disk Laser Weld Brazing of AW5083 Aluminum Alloy with Titanium Grade 2,” Journal of Materials Engineering and Performance, 2017. View at Publisher · View at Google Scholar
  • Syed Kumail Abbas, Shahid Atiq, Saira Riaz, and Shahzad Naseem, “Thermally activated variations in conductivity and activation energy in SrMnO3,” Journal of Materials Science: Materials in Electronics, 2017. View at Publisher · View at Google Scholar
  • L. Robinson, K. Salma-Ancane, L. Stipniece, B. J. Meenan, and A. R. Boyd, “The deposition of strontium and zinc Co-substituted hydroxyapatite coatings,” Journal of Materials Science: Materials in Medicine, vol. 28, no. 3, 2017. View at Publisher · View at Google Scholar
  • Vanessa R.A. Ferreira, Manuel A. Azenha, M. Teresa Mêna, Cosme Moura, Carlos M. Pereira, Ricardo I. Pérez-Martín, José A. Vázquez, and A. Fernando Silva, “Cationic imprinting of Pb(II) within composite networks based on bovine or fish chondroitin sulfate,” Journal of Molecular Recognition, pp. e2614, 2017. View at Publisher · View at Google Scholar
  • Carmen Cavallo, Francesco Di Pascasio, Alessandro Latini, Matteo Bonomo, and Danilo Dini, “Nanostructured Semiconductor Materials for Dye-Sensitized Solar Cells,” Journal of Nanomaterials, vol. 2017, pp. 1–31, 2017. View at Publisher · View at Google Scholar
  • H. T. Rahal, R. Awad, A. M. Abdel-Gaber, and D. El-Said Bakeer, “Synthesis, Characterization, and Magnetic Properties of Pure and EDTA-Capped NiO Nanosized Particles,” Journal of Nanomaterials, vol. 2017, pp. 1–9, 2017. View at Publisher · View at Google Scholar
  • So-Ra Lee, Da-Seul Kim, and Seong-Ho Choi, “The Conjugated Phenylene Polymer-Modified Photoanodes for Quantum Dot-Sensitized Solar Cells,” Journal of Nanomaterials, vol. 2017, pp. 1–11, 2017. View at Publisher · View at Google Scholar
  • Yang Bai, Lian Peng, and Qingshan Zhu, “The preparation of the lithium disilicate glass-ceramic with high translucency,” Journal of Non-Crystalline Solids, vol. 457, pp. 129–134, 2017. View at Publisher · View at Google Scholar
  • Awais Hassan, Muhammad Bilal Khan Niazi, Arshad Hussain, Sarah Farrukh, and Tahir Ahmad, “Development of Anti-bacterial PVA/Starch Based Hydrogel Membrane for Wound Dressing,” Journal of Polymers and the Environment, 2017. View at Publisher · View at Google Scholar
  • P Subba Rao, K Renji, and Mr Bhat, “Molecular dynamics simulations on the effects of carbon nanotubes on mechanical properties of bisphenol E cyanate ester validating experimental results,” Journal of Reinforced Plastics and Composites, vol. 36, no. 3, pp. 186–195, 2017. View at Publisher · View at Google Scholar
  • Seyed Ahmad Attaran, Azman Hassan, and Mat Uzir Wahit, “Materials for food packaging applications based on bio-based polymer nanocomposites,” Journal of Thermoplastic Composite Materials, vol. 30, no. 2, pp. 143–173, 2017. View at Publisher · View at Google Scholar
  • Christian Prommesberger, Christoph Langer, Robert Ławrowski, and Rupert Schreiner, “Investigations on the long-term performance of gated p-type silicon tip arrays with reproducible and stable field emission behavior,” Journal of Vacuum Science & Technology B, Nanotechnology and Microelectronics: Materials, Processing, Measurement, and Phenomena, vol. 35, no. 1, pp. 012201, 2017. View at Publisher · View at Google Scholar
  • Hao Xu, Hong-song Lin, Ping Wang, and Hua Yan, “The influence of water immersion on the mechanical property of cement asphalt mortar and its implications on the slab track,” Journal of Vibroengineering, vol. 19, no. 1, pp. 477–486, 2017. View at Publisher · View at Google Scholar
  • Qing Bi, and Wu Yao, “Fracture Properties of Ultra-High Strength Cement-Based Materials,” Key Engineering Materials, vol. 726, pp. 553–557, 2017. View at Publisher · View at Google Scholar
  • Potiyan Songkeaw, Korakot Onlaor, and Benchapol Tunhoo, “Humidity Sensor Based on Graphene Oxide Film Prepared by Simple Drop-Casting Process,” Key Engineering Materials, vol. 728, pp. 199–203, 2017. View at Publisher · View at Google Scholar
  • Duo Wu, Eva Bäckström, and Minna Hakkarainen, “Starch Derived Nanosized Graphene Oxide Functionalized Bioactive Porous Starch Scaffolds,” Macromolecular Bioscience, pp. 1600397, 2017. View at Publisher · View at Google Scholar
  • Ali Gökhan Demir, and Barbara Previtali, “Additive manufacturing of cardiovascular CoCr stents by selective laser melting,” Materials & Design, 2017. View at Publisher · View at Google Scholar
  • Sabina Lesz, “Effect of cooling rates on the structure, density and micro-indentation behavior of the Fe, Co-based bulk metallic glass,” Materials Characterization, vol. 124, pp. 97–106, 2017. View at Publisher · View at Google Scholar
  • M A Jalaja, P Predeep, and Soma Dutta, “ Ferroelectric, ferromagnetic and optical properties of KBiFe 2 O 5 thin film: a structure property relationship ,” Materials Research Express, vol. 4, no. 1, pp. 016401, 2017. View at Publisher · View at Google Scholar
  • Xiangru Chen, Jie Xu, Henry Hu, Hardy Mohrbacher, Ming Kang, Wei Zhang, Aimin Guo, and Qijie Zhai, “Effects of Niobium Addition on Microstructure and Tensile Behavior of As-cast Ductile Iron,” Materials Science and Engineering: A, 2017. View at Publisher · View at Google Scholar
  • Magdalena Mieloszyk, and Wiesław Ostachowicz, “Moisture contamination detection in adhesive bond using embedded FBG sensors,” Mechanical Systems and Signal Processing, vol. 84, pp. 1–14, 2017. View at Publisher · View at Google Scholar
  • Luz Myrian Satizabal, Diego Costa, Guilherme Ottamr Hainick, Diego Rodrigo Moura, Ausdinir Danilo Bortolozo, and Wislei Riuper Osório, “Microstructural and Hardness Evaluations of a Centrifuged Sn-22Pb Casting Alloy Compared with a Lead-Free SnAg Alloy,” Metallurgical and Materials Transactions A, 2017. View at Publisher · View at Google Scholar
  • Yunzhu Shi, Bin Yang, and Peter Liaw, “Corrosion-Resistant High-Entropy Alloys: A Review,” Metals, vol. 7, no. 2, pp. 43, 2017. View at Publisher · View at Google Scholar
  • Neelam Sharma, Viswanathan N. Nurni, Vilas Tathavadkar, and Somnath Basu, “A review on the generation of solid wastes and their utilization in Indian steel industries,” Mineral Processing and Extractive Metallurgy, pp. 1–8, 2017. View at Publisher · View at Google Scholar
  • T Abhijith, T V Arun Kumar, and V S Reddy, “ Organic bistable memory devices based on MoO 3 nanoparticle embedded Alq 3 structures ,” Nanotechnology, vol. 28, no. 9, pp. 095203, 2017. View at Publisher · View at Google Scholar
  • Changyin Ji, Yu Zhang, Xiaoyu Zhang, Peng Wang, Hongzhi Shen, Wenzhu Gao, Yiding Wang, and William W Yu, “ Synthesis and characterization of Ag 2 S x Se 1− x nanocrystals and their photoelectrochemical property ,” Nanotechnology, vol. 28, no. 6, pp. 065602, 2017. View at Publisher · View at Google Scholar
  • Guan Wang, Wei Ren, Hui Ru Tan, and Ye Liu, “Carbon nanoparticle-modified multi-wall carbon nanotubes with fast adsorption kinetics for water treatment,” Nanotechnology, vol. 28, no. 8, pp. 085703, 2017. View at Publisher · View at Google Scholar
  • M.Yu. Tsvetkov, V.I. Yusupov, N.V. Minaev, A.A. Akovantseva, P.S. Timashev, K.M. Golant, B.N. Chichkov, and V.N. Bagratashvili, “On the mechanisms of single-pulse laser-induced backside wet etching,” Optics & Laser Technology, vol. 88, pp. 17–23, 2017. View at Publisher · View at Google Scholar
  • Vinodh Krishna Caralapatti, and Sivakumar Narayanswamy, “Effect of high repetition laser shock peening on biocompatibility and corrosion resistance of magnesium,” Optics & Laser Technology, vol. 88, pp. 75–84, 2017. View at Publisher · View at Google Scholar
  • Adam Grajcar, Mateusz Morawiec, Maciej Różański, and Sebastian Stano, “Twin-spot laser welding of advanced high-strength multiphase microstructure steel,” Optics & Laser Technology, vol. 92, pp. 52–61, 2017. View at Publisher · View at Google Scholar
  • Alejandro Lorente, Patrick Pingel, Georgios Liaptsis, Hartmut Krüger, and Silvia Janietz, “Modulation of ambipolar charge transport characteristics in side-chain polystyrenes as host materials for solution processed OLEDs,” Organic Electronics, vol. 41, pp. 91–99, 2017. View at Publisher · View at Google Scholar
  • D. V. Shyrokorad, G. V. Kornich, and S. G. Buga, “Simulation of the interaction of bipartite bimetallic clusters with low-energy argon clusters,” Physics of the Solid State, vol. 59, no. 1, pp. 198–208, 2017. View at Publisher · View at Google Scholar
  • L. García-Uriostegui, G. Pineda-Torres, S. López-Ramírez, J. Barragán-Aroche, and C. Durán-Valencia, “Inverse emulsion free-radical polymerization of acrylamide terpolymer for enhanced oil recovery application in harsh reservoir conditions,” Polymer Engineering & Science, 2017. View at Publisher · View at Google Scholar
  • Renata Nunes Oliveira, Ana Paula Duarte Moreira, Rossana Mara da Silva Moreira Thiré, Brid Quilty, Thayse Marques Passos, Pascal Simon, Mauricio Cordeiro Mancini, and Garrett Brian McGuinness, “Absorbent polyvinyl alcohol-sodium carboxymethyl cellulose hydrogels for propolis delivery in wound healing applications,” Polymer Engineering & Science, 2017. View at Publisher · View at Google Scholar
  • Maykel González Torres, Susana Vargas Muñoz, Andrea Ruíz Martínez, Valentina Segovia Hernández, Alejandra Vargas Saucedo, Eric Reyes Cervantes, Rogelio Rodríguez Talavera, Margarita Rivera, and María del Pilar Carreón Castro, “Morphology-controlled silicon oxide particles produced by red wiggler worms,” Powder Technology, 2017. View at Publisher · View at Google Scholar
  • Mohammadreza Sedighi, and Hesamoddin Salarian, “A comprehensive review of technical aspects of biomass cookstoves,” Renewable and Sustainable Energy Reviews, vol. 70, pp. 656–665, 2017. View at Publisher · View at Google Scholar
  • Geetam Richhariya, Anil Kumar, Perapong Tekasakul, and Bhupendra Gupta, “Natural dyes for dye sensitized solar cell: A review,” Renewable and Sustainable Energy Reviews, vol. 69, pp. 705–718, 2017. View at Publisher · View at Google Scholar
  • Jing Hu, Pengfei Liu, Dawei Wang, and Markus Oeser, “Influence of aggregates’ spatial characteristics on air-voids in asphalt mixture,” Road Materials and Pavement Design, pp. 1–19, 2017. View at Publisher · View at Google Scholar
  • Shahira Liza, Junko Hieda, Hiroki Akasaka, Naoto Ohtake, Yusuke Tsutsumi, Akiko Nagai, and Takao Hanawa, “Deposition of boron doped DLC films on TiNb and characterization of their mechanical properties and blood compatibility,” Science and Technology of Advanced Materials, vol. 18, no. 1, pp. 76–87, 2017. View at Publisher · View at Google Scholar
  • Yongdae Kim, and Hyun Young Choi, “Characterization of Ti/W, Ti/Cr, and Ti/Pt thin flims-Part II: Nano-scratching and tribological properties,” Sensors and Actuators A: Physical, vol. 254, pp. 20–27, 2017. View at Publisher · View at Google Scholar