Advances in Materials Science and Engineering

Table of Contents

  • Advances in Materials Science and Engineering -
  • Special Issue
  • - Volume 2024
  • - Article ID 2494900
  • - Research Article

Influence of Tool Pin Profiles on Aluminium Alloy A356 and Ceramic-Based Nanocomposites for Light Weight Structures by Friction Stir Processing

L. Karthick | Mruthunjaya M. | ... | Hari Banda
  • Advances in Materials Science and Engineering -
  • Special Issue
  • - Volume 2024
  • - Article ID 7961951
  • - Research Article

A Practical Swelling Constitutive Model of Anhydrite and Its Application on Tunnel Engineering

Jianxun Wu | Fei Lin | ... | Zhenkun Hou
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2024
  • - Article ID 4275035
  • - Research Article

Effect of Codoping Zinc Oxide Nanoparticles with Sulfur and Nitrogen on Its Energy Bandgap, Antioxidant Properties, and Antibacterial Activity

Diriba Yadesa | Jabessa Nagasa Guyasa | Tamene Tadesse Beyene
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2024
  • - Article ID 4083427
  • - Research Article

Mathematical Modeling and Finite Element Analysis of Residual Stress (RS) Field after Multipass Ultrasonic Surface Rolling

Jinggan Shao | Zhanshu He | ... | Chao Li
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2024
  • - Article ID 3618390
  • - Research Article

Green-Synthesized Sm3+-Doped ZnO Nanoparticles for Multifunctional Applications

Lavanya R. | Ramakrishnappa T. | ... | Shilpa B. M.
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2024
  • - Article ID 7247770
  • - Research Article

Crack Propagation Phenomenon in Gangue Concrete Using the Digital Image Correlation (DIC) Method

Cheng Pan | Zhiming Zheng | Yu Yang
  • Advances in Materials Science and Engineering -
  • Special Issue
  • - Volume 2024
  • - Article ID 9786960
  • - Retraction

Retracted: Optimizing the Characteristics of the Laser Hardfacing Process Parameters to Maximize the Wear Resistance of Ni-Based Hard-Faced Deposits Using the RSM Technique

Advances in Materials Science and Engineering
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2024
  • - Article ID 3911466
  • - Research Article

Thermal and Morphological Assessment of the Penta-Layered, Hybrid U-Polyester Composite Reinforced with Glass Fibers and Polypropylene

Md. Shahin Akanda | Md. Shariful Islam | ... | Md. Sahab Uddin
  • Advances in Materials Science and Engineering -
  • Special Issue
  • - Volume 2024
  • - Article ID 4384178
  • - Research Article

Dry Sliding Wear Behavior of Copper Matrix Composites Enhanced with TiO2 and MoS2 Hybrids

V. Subbian | H. Sandeep | ... | Dereje H. Georgis Tefera
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2024
  • - Article ID 8818030
  • - Research Article

Investigation of Mechanical and Thermal Stabilities of Tamarind Seed- and Peanut Shell Powder-Reinforced Vinyl Ester Composite

Ramakrishnan Kulasekaran Sathish Kumar | Rathinasabapathy Sasikumar | ... | Ramaswamy Krishnaraj
  • Advances in Materials Science and Engineering -
  • Special Issue
  • - Volume 2024
  • - Article ID 9819531
  • - Retraction

Retracted: Impact of Light and Temperature on Growth, Intracellular and Extracellular Pigment, and Lovastatin Yield by Monascus ruber in Synthetic Medium

Advances in Materials Science and Engineering
  • Advances in Materials Science and Engineering -
  • Special Issue
  • - Volume 2024
  • - Article ID 9813686
  • - Retraction

Retracted: Effects of Polypropylene Waste Addition as Coarse Aggregates in Concrete: Experimental Characterization and Statistical Analysis

Advances in Materials Science and Engineering
  • Advances in Materials Science and Engineering -
  • Special Issue
  • - Volume 2024
  • - Article ID 9810320
  • - Retraction

Retracted: Improvement of Microstructure and Properties of Q235 Steel by Iron-Based Laser Cladding Coating

Advances in Materials Science and Engineering
  • Advances in Materials Science and Engineering -
  • Special Issue
  • - Volume 2024
  • - Article ID 9808340
  • - Retraction

Retracted: Research on the Injection Mold Design and Molding Process Parameter Optimization of a Car Door Inner Panel

Advances in Materials Science and Engineering
  • Advances in Materials Science and Engineering -
  • Special Issue
  • - Volume 2024
  • - Article ID 9805723
  • - Retraction

Retracted: Response Surface Methodology Approach to Predict the Flexural Moment of Ferrocement Composites with Weld Mesh and Steel Slag as Partial Replacement for Fine Aggregate

Advances in Materials Science and Engineering
Advances in Materials Science and Engineering
 Journal metrics
See full report
Acceptance rate16%
Submission to final decision115 days
Acceptance to publication21 days
CiteScore3.300
Journal Citation Indicator-
Impact Factor-
 Submit Check your manuscript for errors before submitting

Article of the Year Award: Impactful research contributions of 2022, as selected by our Chief Editors. Discover the winning articles.