Advances in Materials Science and Engineering

Advances in Materials Science and Engineering / Table of Contents: 2008

Table of Contents

  • 2020
  • 2019
  • 2018
  • 2017
  • 2016
  • 2015
  • 2014
  • 2013
  • 2012
  • 2011
  • 2010
  • 2009
  • 2008
  • 2007

Table of Contents: 2008

  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2008
  • - Article ID 394235
  • - Research Article

Fire and Gas Barrier Properties of Poly(styrene-co-acrylonitrile) Nanocomposites Using Polycaprolactone/Clay Nanohybrid Based-Masterbatch

S. Benali | A. Olivier | ... | Ph. Dubois
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2008
  • - Article ID 693207
  • - Research Letter

Raman Spectroscopy for the Nondestructive Testing of Carbon Fiber

Glenn Washer | Frank Blum
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2008
  • - Article ID 186427
  • - Research Letter

Calibrated Pulse-Thermography Procedure for Inspecting HDPE

Mohammed A. Omar | Yi Zhou | ... | Eric Planting
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2008
  • - Article ID 518354
  • - Research Article

Estimation of Compositions of Zr-Cu Binary Sputtered Film and Its Characterization

Katsuyoshi Kondoh | Junji Fujita | ... | Tadashi Serikawa
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2008
  • - Article ID 659145
  • - Research Article

Thermal Arrest Memory Effect in Ni-Mn-Ga Alloys

A. Rudajevova
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2008
  • - Article ID 312057
  • - Research Letter

Structural Characteristics and Crystallization of Metallic Glass Sputtered Films by Using Zr System Target

Katsuyoshi Kondoh | Kenshi Kawabata | ... | Hisamichi Kimura
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2008
  • - Article ID 345895
  • - Research Article

Characterization and Catalytic Performance of Niobic Acid Dispersed over Titanium Silicalite

Didik Prasetyoko | Zainab Ramli | ... | Hadi Nur
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2008
  • - Article ID 406067
  • - Research Article

Coesite Formation at Ambient Pressure and Low Temperatures

J. R. Martínez | A. Vázquez-Durán | ... | Facundo Ruiz
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2008
  • - Article ID 907895
  • - Research Letter

Internal Vibrations of Edge Dislocation Dipoles

J. J. Kratochvíl | F. Kroupa
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2008
  • - Article ID 962160
  • - Research Letter

Reflection Band Control of Inverse Opal Film with Photoresponse Properties of Push-Pull Type Azobenzene LC Polymers

Sunnam Kim | Takahiro Shiozawa | ... | Seiji Kurihara
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2008
  • - Article ID 368985
  • - Research Letter

Biomimetic Composite-Metal Hip Resurfacing Implant

Habiba Bougherara | Martin N. Bureau
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2008
  • - Article ID 737546
  • - Research Letter

TEM Nanostructural Study of Al-6Si-3Cu- 𝑥 Mg Melt-Spun Ribbons

Ismeli Alfonso López | Cuauhtémoc Maldonado Zepeda | ... | Juan Serrato Rodríguez
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2008
  • - Article ID 247053
  • - Research Letter

Selected Area XPS Analysis for Identification of Pigment Compounds in Microscopic Paint Flakes

Bryony Joanne James | Rebecca Cameron | Camilla Baskcomb
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2008
  • - Article ID 206019
  • - Research Letter

Surface and Interface Properties of 10–12 Unit Cells Thick Sputter Deposited Epitaxial CeO2 Films

L. V. Saraf | C. M. Wang | ... | P. Nachimuthu
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2008
  • - Article ID 814137
  • - Research Letter

Properties of Reinforced Concrete Steel Rebars Exposed to High Temperatures

İlker Bekir Topçu | Cenk Karakurt
Advances in Materials Science and Engineering
Journal metrics
Acceptance rate29%
Submission to final decision84 days
Acceptance to publication41 days
CiteScore1.370
Impact Factor1.399
APC$2200
Submit
Author guidelines Editorial board Databases and indexing
Sign up for content alertsSign up

We are committed to sharing findings related to COVID-19 as quickly and safely as possible. Any author submitting a COVID-19 paper should notify us at help@hindawi.com to ensure their research is fast-tracked and made available on a preprint server as soon as possible. We will be providing unlimited waivers of publication charges for accepted articles related to COVID-19.