Advances in Materials Science and Engineering

Table of Contents: 2009

  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2009
  • - Article ID 704294
  • - Review Article

Growth and PhysioChemical Properties of Second-Order Nonlinear Optical L-Threonine Single Crystals

G. Ramesh Kumar | S. Gokul Raj
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2009
  • - Article ID 830476
  • - Research Article

Friction and Wear Studies Using Taguchi Method: Application to the Characterization of Carbon-Silicon Carbide Tribological Couples of Automotive Water Pump Seals

Pascal Déprez | Philippe Hivart | ... | Etienne Debarre
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2009
  • - Article ID 698101
  • - Research Article

XPS Study of Chemical Changes on the La/Ce Treated Surface of A361 Aluminium Alloy Exposed to Air at Temperatures up to

A. Pardo | S. Feliú | ... | E. Matykina
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2009
  • - Article ID 627937
  • - Research Article

Microsegregation and Solidification Shrinkage of Copper-Lead Base Alloys

B. Korojy | L. Ekbom | H. Fredriksson
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2009
  • - Article ID 601850
  • - Research Article

Fabrication of Highly Porous Alumina-Based Ceramics with Connected Spaces by Employing PMMA Microspheres as a Template

Kazutaka Kamitani | Takeo Hyodo | ... | Makoto Egashira
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2009
  • - Article ID 493097
  • - Research Article

Column Strengthening with TRC: Influences of the Column Geometry onto the Confinement Effect

Regine Ortlepp | Andy Lorenz | Manfred Curbach
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2009
  • - Article ID 502437
  • - Research Article

Structural and Raman Vibrational Studies of - Oxide System

L. Bourja | B. Bakiz | ... | J. R. Gavarri
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2009
  • - Article ID 648906
  • - Research Article

Properties Evolution during Transient Liquid Phase Sintering of PM Alumix 431

Maziyar Azadbeh | Zahra Allafe Razzaghi
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2009
  • - Article ID 372708
  • - Research Article

Anion Effect of Zinc Source on Chemically Deposited ZnS(O,OH) Films

K. Ernits | K. Muska | ... | M. Altosaar
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2009
  • - Article ID 916467
  • - Research Article

The Effect of Novel Binary Accelerator System on Properties of Vulcanized Natural Rubber

Moez Kamoun | Abdallah Nassour | Nelles Michael
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2009
  • - Article ID 383842
  • - Research Article

NTCR Behavior of La-Doped Ceramics

Ying Luo | Xvqiong Li | Xinyu Liu
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2009
  • - Article ID 827241
  • - Research Article

Preparation and In Vitro Behavior of a Poly(lactic acid)-Fiber/Hydroxyapatite Composite Sheet

Yasuhiro Tanimoto | Norihiro Nishiyama
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2009
  • - Article ID 309209
  • - Research Article

Systematic Investigation of Gettering Effects on 4th Row Element Impurities in Si by Dopant Atoms

Koji Sueoka | Ken Kamimura | Seiji Shiba
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2009
  • - Article ID 928545
  • - Review Article

Dielectric Spectroscopy Analyses of SrBi4Ti4O15 Films Obtained from Soft Chemical Solution

A. Z. Simões | C. S. Riccardi
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2009
  • - Article ID 254848
  • - Research Article

Plasma Spraying and Characterization of Tungsten Carbide-Cobalt Coatings by the Water-Stabilized System WSP

Pavel Ctibor | Micheala Kašparová | ... | František Zahálka
Advances in Materials Science and Engineering
 Journal metrics
Acceptance rate31%
Submission to final decision71 days
Acceptance to publication30 days
CiteScore2.000
Impact Factor1.271
 Submit

We are committed to sharing findings related to COVID-19 as quickly and safely as possible. Any author submitting a COVID-19 paper should notify us at help@hindawi.com to ensure their research is fast-tracked and made available on a preprint server as soon as possible. We will be providing unlimited waivers of publication charges for accepted articles related to COVID-19. Sign up here as a reviewer to help fast-track new submissions.