Advances in Materials Science and Engineering

Table of Contents: 2010

  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2010
  • - Article ID 715872
  • - Research Article

Critical Analysis on the Structural and Magnetic Properties of Bulk and Nanocrystalline Cu-Fe-O

D. Paul Joseph | C. Venkateswaran | R. Selva Vennila
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2010
  • - Article ID 180975
  • - Research Article

Microstructure Evolution of Grade X100 Pipeline under Plastic Deformation Condition

Lihua Qi | Long Yang | ... | Jianxun Zhang
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2010
  • - Article ID 325683
  • - Research Article

A Phenomenological Study on the Synergistic Role of Precious Metals in the Steam Reforming of Logistic Fuels on Trimetal-Supported Catalysts

Abdul-Majeed Azad | Desikan Sundararajan
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2010
  • - Article ID 498378
  • - Research Article

Performance of Sprayed Fiber Reinforced Polymer Strengthened Timber Beams

S. Talukdar | N. Banthia
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2010
  • - Article ID 683429
  • - Research Article

Parameters Expediting the Thermal Conversion of Ba-Exchanged Zeolite A to Monoclinic Celsian

A. Marocco | M. Pansini | ... | S. Esposito
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2010
  • - Article ID 835018
  • - Research Article

Sintering Behavior, Microstructure, and Mechanical Properties: A Comparison among Pressureless Sintered Ultra-Refractory Carbides

Laura Silvestroni | Diletta Sciti
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2010
  • - Article ID 631437
  • - Research Article

Cutting Force in Stone Machining by Diamond Disk

S. Turchetta
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2010
  • - Article ID 398590
  • - Research Article

Anisotropic Ferro- and Dielectric Properties of Textured Bi4Ti3O12 Ceramics Prepared by the Solid-State Reaction Based on Multiple Calcination

Xiangyu Mao | Wei Wang | ... | Xiaobing Chen
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2010
  • - Article ID 958581
  • - Research Article

Deposition and Tribological Properties of Sulfur-Doped DLC Films Deposited by PBII Method

Nutthanun Moolsradoo | Shuichi Watanabe
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2010
  • - Article ID 923409
  • - Research Article

Growth of AlGaSb Compound Semiconductors on GaAs Substrate by Metalorganic Chemical Vapour Deposition

A. H. Ramelan | H. Harjana | P. Arifin
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2010
  • - Article ID 269537
  • - Research Article

Cellular Energy Absorbing TRIP-Steel/Mg-PSZ Composite: Honeycomb Structures Fabricated by a New Extrusion Powder Technology

Ulrich Martin | David Ehinger | ... | Mathias Herrmann
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2010
  • - Article ID 789541
  • - Research Article

Synthesis of Nanoporous TiO2 and Its Potential Applicability for Dye-Sensitized Solar Cell Using Antocyanine Black Rice

Brian Yuliarto | Wilman Septina | ... | Nugraha
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2010
  • - Article ID 562842
  • - Research Article

Fabrication and Characterization of Copper System Compound Semiconductor Solar Cells

Ryosuke Motoyoshi | Takeo Oku | ... | Jhon Cuya
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2010
  • - Article ID 954507
  • - Research Article

Corundum Molds for Investment Casting from Refractory Alloys and Metals

P. A. Storozhenko | G. I. Shcherbakova | ... | A. S. Murkina
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2010
  • - Article ID 824098
  • - Research Article

Multiple Regression Prediction Model for Cutting Forces in Turning Carbon-Reinforced PEEK CF30

Francisco Mata | Elena Beamud | ... | Mohammed Bezzazi
Advances in Materials Science and Engineering
 Journal metrics
Acceptance rate33%
Submission to final decision71 days
Acceptance to publication29 days
CiteScore2.000
Impact Factor1.271
 Submit

We are committed to sharing findings related to COVID-19 as quickly as possible. We will be providing unlimited waivers of publication charges for accepted research articles as well as case reports and case series related to COVID-19. Review articles are excluded from this waiver policy. Sign up here as a reviewer to help fast-track new submissions.