Advances in Materials Science and Engineering

Experimental Investigation of the Variation of Concrete Pores under the Action of Freeze-Thaw Cycles by Using X-Ray CT

Influence of Sc on Microstructure and Mechanical Properties of High Zn-Containing Mg Alloy

Synthesis and Dimerization Behavior of Five Metallophthalocyanines in Different Solvents

Experimental Investigation on Use of Wheat Straw Ash and Bentonite in Self-Compacting Cementitious System

Utilization of Recycled Concrete Aggregates in Stone Mastic Asphalt Mixtures

Performance Analysis of γ-Radiation Test Monitor Using Monocrystalline n+pp++ Silicon Solar Cell: CsI(Tl) Scintillator

Experimental Research on Compression Properties of Cement Asphalt Mortar due to Drying and Wetting Cycle

Phytoremediation Potential of Vetiver System Technology for Improving the Quality of Palm Oil Mill Effluent

The Increased Production Efficiency and Optimization Terms of Stationarity by Flat Grinding with Abrasive Circle Surface

Thermal Characteristics of Multilayer Insulation Materials for Flexible Thin-Film Solar Cell Array of Stratospheric Airship

Predicting Concrete Compressive Strength and Modulus of Rupture Using Different NDT Techniques

Effect of Liquid Phase Additions on Microstructure and Thermal Properties in Copper and Copper-Diamond Composites

Dielectric Behaviour of Zn/Al-NO₃ LDHs Filled with Polyvinyl Chloride Composite at Low Microwave Frequencies

Reducing Railway Noise with Porous Sound-Absorbing Concrete Slabs

Influence of the Molecular Adhesion Force on the Indentation Depth of a Particle into the Wafer Surface in the CMP Process

Advances in Materials Science and Engineering

Table of Contents

Table of Contents: 2014

Experimental Investigation of the Variation of Concrete Pores under the Action of Freeze-Thaw Cycles by Using X-Ray CT

Influence of Sc on Microstructure and Mechanical Properties of High Zn-Containing Mg Alloy

Synthesis and Dimerization Behavior of Five Metallophthalocyanines in Different Solvents

Experimental Investigation on Use of Wheat Straw Ash and Bentonite in Self-Compacting Cementitious System

Utilization of Recycled Concrete Aggregates in Stone Mastic Asphalt Mixtures

Performance Analysis of γ-Radiation Test Monitor Using Monocrystalline n+pp++ Silicon Solar Cell: CsI(Tl) Scintillator

Experimental Research on Compression Properties of Cement Asphalt Mortar due to Drying and Wetting Cycle

Phytoremediation Potential of Vetiver System Technology for Improving the Quality of Palm Oil Mill Effluent

The Increased Production Efficiency and Optimization Terms of Stationarity by Flat Grinding with Abrasive Circle Surface

Thermal Characteristics of Multilayer Insulation Materials for Flexible Thin-Film Solar Cell Array of Stratospheric Airship

Predicting Concrete Compressive Strength and Modulus of Rupture Using Different NDT Techniques

Effect of Liquid Phase Additions on Microstructure and Thermal Properties in Copper and Copper-Diamond Composites

Dielectric Behaviour of Zn/Al-NO₃ LDHs Filled with Polyvinyl Chloride Composite at Low Microwave Frequencies

Reducing Railway Noise with Porous Sound-Absorbing Concrete Slabs

Influence of the Molecular Adhesion Force on the Indentation Depth of a Particle into the Wafer Surface in the CMP Process

Advances in Materials Science and Engineering

Table of Contents

Table of Contents: 2014

Experimental Investigation of the Variation of Concrete Pores under the Action of Freeze-Thaw Cycles by Using X-Ray CT

Influence of Sc on Microstructure and Mechanical Properties of High Zn-Containing Mg Alloy

Synthesis and Dimerization Behavior of Five Metallophthalocyanines in Different Solvents

Experimental Investigation on Use of Wheat Straw Ash and Bentonite in Self-Compacting Cementitious System

Utilization of Recycled Concrete Aggregates in Stone Mastic Asphalt Mixtures

Performance Analysis of γ-Radiation Test Monitor Using Monocrystalline n+pp++ Silicon Solar Cell: CsI(Tl) Scintillator

Experimental Research on Compression Properties of Cement Asphalt Mortar due to Drying and Wetting Cycle

Phytoremediation Potential of Vetiver System Technology for Improving the Quality of Palm Oil Mill Effluent

The Increased Production Efficiency and Optimization Terms of Stationarity by Flat Grinding with Abrasive Circle Surface

Thermal Characteristics of Multilayer Insulation Materials for Flexible Thin-Film Solar Cell Array of Stratospheric Airship

Predicting Concrete Compressive Strength and Modulus of Rupture Using Different NDT Techniques

Effect of Liquid Phase Additions on Microstructure and Thermal Properties in Copper and Copper-Diamond Composites

Dielectric Behaviour of Zn/Al-NO3 LDHs Filled with Polyvinyl Chloride Composite at Low Microwave Frequencies

Reducing Railway Noise with Porous Sound-Absorbing Concrete Slabs

Influence of the Molecular Adhesion Force on the Indentation Depth of a Particle into the Wafer Surface in the CMP Process

Dielectric Behaviour of Zn/Al-NO₃ LDHs Filled with Polyvinyl Chloride Composite at Low Microwave Frequencies