Advances in Materials Science and Engineering

Influence of Heat Treatment on Residual Stress in Cold-Forged Parts

Prediction of Three-Dimensional Milling Forces Based on Finite Element

Biochar Preparation, Characterization, and Adsorptive Capacity and Its Effect on Bioavailability of Contaminants: An Overview

Mechanical Behavior of Interface between Composite Geomembrane and Permeable Cushion Material

The Influence of Aggregate Size and Binder Material on the Properties of Pervious Concrete

Fiber Bragg Grating-Based Performance Monitoring of Piles Fiber in a Geotechnical Centrifugal Model Test

Microstructural Characterization and Wear Properties of Fe-Based Amorphous-Crystalline Coating Deposited by Twin Wire Arc Spraying

Dynamic Recrystallization Behavior of TA15 Titanium Alloy under Isothermal Compression during Hot Deformation

Performance of BFRP Retrofitted RCC Piles Subjected to Axial Loads

Experimental Study of Ultralight (<300 kg/m³) Foamed Concrete

Preparation of Flame Retardant Modified with Titanate for Asphalt Binder

Effect of Aerogel Particle Concentration on Mechanical Behavior of Impregnated RTV 655 Compound Material for Aerospace Applications

Finite Element Modeling of Crack Generation in Laser Shock Peening Processed Airfoils

Structural Modification of Sol-Gel Synthesized V₂O₅ and TiO₂ Thin Films with/without Erbium Doping

Compressive Behaviour of RC Column with Fibre Reinforced Concrete Confined by CFRP Strips

Advances in Materials Science and Engineering

Table of Contents

Table of Contents: 2014

Influence of Heat Treatment on Residual Stress in Cold-Forged Parts

Prediction of Three-Dimensional Milling Forces Based on Finite Element

Biochar Preparation, Characterization, and Adsorptive Capacity and Its Effect on Bioavailability of Contaminants: An Overview

Mechanical Behavior of Interface between Composite Geomembrane and Permeable Cushion Material

The Influence of Aggregate Size and Binder Material on the Properties of Pervious Concrete

Fiber Bragg Grating-Based Performance Monitoring of Piles Fiber in a Geotechnical Centrifugal Model Test

Microstructural Characterization and Wear Properties of Fe-Based Amorphous-Crystalline Coating Deposited by Twin Wire Arc Spraying

Dynamic Recrystallization Behavior of TA15 Titanium Alloy under Isothermal Compression during Hot Deformation

Performance of BFRP Retrofitted RCC Piles Subjected to Axial Loads

Experimental Study of Ultralight (<300 kg/m³) Foamed Concrete

Preparation of Flame Retardant Modified with Titanate for Asphalt Binder

Effect of Aerogel Particle Concentration on Mechanical Behavior of Impregnated RTV 655 Compound Material for Aerospace Applications

Finite Element Modeling of Crack Generation in Laser Shock Peening Processed Airfoils

Structural Modification of Sol-Gel Synthesized V₂O₅ and TiO₂ Thin Films with/without Erbium Doping

Compressive Behaviour of RC Column with Fibre Reinforced Concrete Confined by CFRP Strips

Advances in Materials Science and Engineering

Table of Contents

Table of Contents: 2014

Influence of Heat Treatment on Residual Stress in Cold-Forged Parts

Prediction of Three-Dimensional Milling Forces Based on Finite Element

Biochar Preparation, Characterization, and Adsorptive Capacity and Its Effect on Bioavailability of Contaminants: An Overview

Mechanical Behavior of Interface between Composite Geomembrane and Permeable Cushion Material

The Influence of Aggregate Size and Binder Material on the Properties of Pervious Concrete

Fiber Bragg Grating-Based Performance Monitoring of Piles Fiber in a Geotechnical Centrifugal Model Test

Microstructural Characterization and Wear Properties of Fe-Based Amorphous-Crystalline Coating Deposited by Twin Wire Arc Spraying

Dynamic Recrystallization Behavior of TA15 Titanium Alloy under Isothermal Compression during Hot Deformation

Performance of BFRP Retrofitted RCC Piles Subjected to Axial Loads

Experimental Study of Ultralight (<300 kg/m3) Foamed Concrete

Preparation of Flame Retardant Modified with Titanate for Asphalt Binder

Effect of Aerogel Particle Concentration on Mechanical Behavior of Impregnated RTV 655 Compound Material for Aerospace Applications

Finite Element Modeling of Crack Generation in Laser Shock Peening Processed Airfoils

Structural Modification of Sol-Gel Synthesized V2O5 and TiO2 Thin Films with/without Erbium Doping

Compressive Behaviour of RC Column with Fibre Reinforced Concrete Confined by CFRP Strips

Experimental Study of Ultralight (<300 kg/m³) Foamed Concrete

Structural Modification of Sol-Gel Synthesized V₂O₅ and TiO₂ Thin Films with/without Erbium Doping