Editorial Board
Chief Editor
- Amit Bandyopadhyay
, Washington State University, USA
Associate Editors
- Vamsi Balla, CSIR-Central Glass & Ceramic Research Institute, India
- Sandip Harimkar, Oklahoma State University, USA
- Ravi Kumar, Indian Institute of Technology-Madras, India
- Peter Majewski, University of South Australia, Australia
- Enzo Martinelli, University of Salerno, Italy
- Luigi Nicolais, University of Naples, Italy
- Carlos R. Rambo, Federal University of Santa Catarina, Brazil
- Michael J. Schütze, DECHEMA Gesellschaft für Chemische Technik und Biotechnologie e.V., Germany
- Kohji Tashiro, Toyota Technological Institute, Japan
- Zhonghua Yao, Wuhan University of Technology, China
- Wei Zhou, Xiamen University, China
Academic Editors
- Antonio Abate, Helmholtz Zentrum Berlin für Materialien und Energie, Germany
- Hany Abdo, Center of Excellence for Research in Engineering Materials (CEREM), King Saud University, Saudi Arabia, Saudi Arabia
- H.P.S. Abdul Khalil, Universiti Sains Malaysia, Malaysia
- Ismael alejandro Aguayo villarreal, University of Colima, Mexico
- Muhammad Ahmad, National University of Computer and Emerging Sciences, Pakistan
- Sheraz Ahmad, National Textile University, Pakistan
- Michael Aizenshtein, Ben–Gurion University of the Negev, Israel
- Hamed Akhavan, Universidade do Porto, Portugal
- Jarir Aktaa, Karlsruhe Institute of Technology, Germany
- Bandar AlMangour, King Fahd University of Petroleum and Minerals, Saudi Arabia
- Huaming An, Kunming University of Science and Technology, China
- Santiago Aparicio, University of Burgos, Spain
- Raul Arenal, Universidad de Zaragoza, Spain
- Alicia Esther Ares, Universidad Nacional de Misiones, Argentina
- Apostolos Avgeropoulos, University of Ioannina, Greece
- Siva Avudaiappan, University of Concepcion, Chile, Chile
- Habib Awais, National Textile University, Pakistan
- M BAHUBALENDRUNI, National Institute of Technology Puducherry, India
- Enrico Babilio, University of Naples Federico II, Italy
- Renal Backov, Université de Bordeaux, France
- Sudharsan Balasubramanian, Centre for Nonlinear Systems, Chennai Institute of Technology, India
- Markus Bambach, Brandenburg Technical University, Germany
- Irene Bavasso, Sapienza University of Rome, Saint Vincent and the Grenadines
- Stefano Bellucci, INFN, National Laboratory of Frascati, Frascati, Italy
- Brahim Benmokrane, University of Sherbrooke, Canada
- Jean-Michel Bergheau, Université de Lyon, France
- Guillaume Bernard-Granger, Commissariat à l’Énergie Atomique, France
- Giovanni Berselli, University of Genoa, Italy
- Patrice Berthod, University of Lorraine , France
- Michele Bianchi, Istituto Ortopedico Rizzoli , Italy
- Hugo C. Biscaia, NOVA School of Science and Technology, Portugal
- Antonio Boccaccio, Politecnico di Bari, Italy
- Mohamed Bououdina, Prince Sultan University, Saudi Arabia
- Heinz-Günter Brokmeier, Clausthal University of Technology , Germany
- Gianlorenzo Bussetti, Politecnico di Milano, Italy
- Antonio Caggiano, Technische Universität Darmstadt, Germany
- Marco Cannas, Università di Palermo, Italy
- Qi Cao, Dalian University of Technology, China
- Gianfranco Carotenuto, Institute for Polymers, Composites and Biomaterials, Italian National Research Council, Italy
- Paolo Andrea Carraro, University of Padova, Italy
- Michelina Catauro, Università degli Studi della Campania "Luigi Vanvitelli", Italy
- Jose Cesar de Sa, University of Porto, Portugal
- Wen-Shao Chang, The University of Sheffield, United Kingdom
- Qian Chen, Chang'an University, China
- Francisco Chinesta, ENSAM ParisTech, France
- Er-Yuan Chuang, Taipei Medical University, Taiwan
- Gianluca Cicala, University of Catania, Italy
- Francesco Colangelo, Universita degli Studi di Napoli Parthenope, Italy
- María Criado, Eduardo Torroja Institute for Construction Sciences. IETcc-CSIC, Spain
- Enrique Cuan-Urquizo, Tecnologico de Monterrey, Mexico
- Ismail DEMIR, Afyon Kocatepe University, Turkey
- Lucas Da Silva, Faculdade de Engenharia da Universidade do Porto, Portugal
- J. Paulo Davim, University of Aveiro, Portugal
- Angela De Bonis, Università della Basilicata, Italy
- Abílio De Jesus, University of Porto, Portugal
- José António Fonseca De Oliveira Correia, University of Porto, Portugal
- Luca De Stefano, National Research Council, Italy
- Luigi Di Benedetto, University of Salerno, Italy
- Maria Laura Di Lorenzo, Consiglio Nazionale delle Ricerche, Italy
- Marisa Di Sabatino, Norwegian University of Science and Technology, Norway
- Luigi Di Sarno, Università degli Studi del Sannio, Italy
- Ana María Díez-Pascual, Universidad de Alcalá - Página de Inicio, Spain
- Guru P. Dinda, Wayne State University, USA
- Nadka Tzankova Dintcheva, Università di Palermo, Italy
- Hongbiao Dong, University of Leicester, China
- Mingdong Dong, Interdisciplinary Nanoscience Center (INANO) Aarhus University , Denmark
- Frederic Dumur, Aix-Marseille Université, France
- Stanislaw Dymek, AGH University of Science and Technology , Poland
- Kaveh Edalati, Kyushu University, Japan
- Philip Eisenlohr, Michigan State University, USA
- Claude Estournès, Université Paul Sabatier Toulouse III, France
- Luís Evangelista, ISEL-IPL, Norway
- Michele Fedel, University Trento, Italy
- Francisco Javier Fernández Fernández, Universidad De Santiago de Compostela, Spain
- Isabel J. Ferrer, Universidad Autónoma Madrid, Spain
- Dora Foti, Politecnico di Bari, Italy
- Massimo Fresta, Universita degli studi Magna Graecia di Catanzaro, Italy
- Dhanesh G. Mohan, Shandong University, China
- Samia Gad, Solid State Physics Department, Physics Research Institute, National Research Centre, Dokki, Giza12622, Egypt, Egypt
- Pasquale Gallo, Aalto University, Finland
- Sharanabasava Ganachari, KLE Technological University, India
- Santiago Garcia-Granda, Universidad de Oviedo, Spain
- Carlos Garcia-Mateo, Consejo Superior de Investigaciones Científicas, Spain
- Achraf Ghorbal, University of Gabès, Tunisia
- Georgios I. Giannopoulos, University of Peloponnese, Greece
- Ivan Giorgio, University of L'Aquila, Italy
- Antonio Gloria, National Research Council of Italy, Italy
- Andrea Grilli, University of the Republic of San Marino, San Marino
- Vincenzo Guarino, National Research Council of Italy, Italy
- Daniel Guay, Université du Québec, Canada
- Gianluca Gubbiotti, Consiglio Nazionale delle Ricerche-Istituto Officina dei Materiali, Italy
- Jenö Gubicza, Eötvös Loránd University, Hungary
- Xuchun Gui, Sun Yat-sen University, China
- Benoit Guiffard, University of Nantes, France
- Zhixing Guo, Sichuan University, China
- Ivan Gutierrez-Urrutia, National Institute for Materials Science, Japan
- Weiwei Han, Dongguk University, Republic of Korea
- Simo-Pekka Hannula, Aalto University, Finland
- A. M. Hassan, Al-Azhar University, Egypt
- Akbar Heidarzadeh, Azarbaijan Shahid Madani University, Iran
- Yi Huang, Bournemouth University, United Kingdom
- Michele Iafisco, Institute of Science and Technology for Ceramics, Italy
- Saliha Ilican, Eskisehir Technical University, Turkey
- Md Mainul Islam, University of Southern Queensland, Australia
- Ilia Ivanov, Oak Ridge National Laboratory, USA
- Hafsa Jamshaid, National Textile University, Pakistan
- RAJESH KANNAN A, HANYANG UNIVERSITY, ERICA CAMPUS, ANSAN, GYEONGGI-DO, SOUTH KOREA, Democratic People’s Republic of Korea
- Hom Kandel, University of Wisconsin Parkside, USA
- Kenji Kaneko, Kyushu University, Japan
- Fuat Kara, Duzce University, Turkey
- Mehran Khan, Hong Kong Polytechnic University, Hong Kong, Hong Kong
- Akihiko Kimura, Kyoto University , Japan
- Fantao Kong, Harbin Institute of Technology, China
- Ling B. Kong, Nanyang Technological University, Singapore
- Lingxue Kong, Deakin University, Australia
- Pramod Koshy, The University of New South Wales, Australia
- Hongchao Kou, Northwestern Polytechnical University, China
- Alexander Kromka, Institute of Physics ASCR, Czech Republic
- Abhinay Kumar, Thapar Institute of Engineering and Technology, India
- Avvaru Praveen Kumar, Adama Science and Technology University, Adama, Ethiopia
- Paweł Kłosowski, Gdansk University of Technology, Poland
- Wing-Fu Lai, Department of Health Technology and Informatics, Hong Kong
- Andrea Lamberti, Politecnico di Torino, Italy
- Luciano Lamberti, Politecnico di Bari, Italy
- Fulvio Lavecchia, Politecnico di Bari, Italy
- Marino Lavorgna, National Research Council, Italy
- Laurent Lebrun, Université de Lyon, France
- Joon-Hyung Lee, Kyungpook National University, Republic of Korea
- Cristina Leonelli, Università di Modena e Reggio Emilia, Italy
- Chenggao Li, Harbin Institute of Technology, China
- Rongrong Li, China University of Petroleum, China
- Ying Li, University of Connecticut, USA
- Yuanshi Li, University of Saskatchewan, Canada
- Yuning Li, University of Waterloo, Canada
- Guang-xing Liang, Shenzhen University, China
- Barbara Liguori, University of Naples Federico II, Italy
- Jun Liu, Jiangsu University, China
- Yunqi Liu, Chinese Academy of Sciences, China
- Zhiping Luo, Fayetteville State University, USA
- Fernando Lusquiños, University of Vigo, Spain
- Himadri Majumder, Mechanical Engineering Department, G H Raisoni College of Engineering and Management, Pune, India, India
- Georgios Maliaris, Democritus University of Thrace, Greece
- Dimitrios E. Manolakos, National Technical University of Athens, Greece
- Necmettin Maraşlı, Yildiz Technical University, Turkey
- Anish Mariadhas, Sathyabama Institute of science and technology, India
- Alessandro Martucci, Università di Padova, Italy
- Roshan Mayadunne, Commonwealth Scientific and Industrial Research Organisation, Australia
- Nur Izzi Md Yusoff, Universiti Kebangsaan Malaysia, Malaysia
- Mamoun Medraj, Concordia University , Canada
- Shazim A. Memon, Nazarbayev University, Kazakhstan
- Pratima Meshram, CSIR-National Metallurgical Laboratory, Jamshedpur, India
- Mohsen Mhadhbi, National Institute of Research and Physical-chemical Analysis, Tunisia
- Philippe Miele, University of Montpellier 2, France
- Andrey E. Miroshnichenko, Australian National University, Australia
- Ajay Kumar Mishra, Durban University of Technology, South Africa
- Hossein Moayedi, Ton Duc Thang University, Vietnam
- Sakar Mohan, Jain University, India
- Tahir Muhmood, Nanjing Forestry University, China
- Faisal Mukhtar, Institute of Physics, The Islamia University Bahawalpur, Pakistan
- Dr. Tauseef Munawar, Institute of Physics, The Islamia University of Bahawalpur, Pakistan
- Roger Narayan, North Carolina State University, USA
- Saleem Nasir, AWKUM, Pakistan
- Rufino M. Navarro, Insituto de Catálisis y Petroleoquímica, Spain
- Miguel Navarro-Cia, University of Birmingham, United Kingdom
- Yasir Nawab, National Textile University, Pakistan
- Behzad Nematollahi, Swinburne University of Technology, Australia
- Peter Niemz, ETH-Zurich, Switzerland
- Hiroshi Noguchi, Kyushu University , Japan
- Dariusz Oleszak, Warsaw University of Technology, Poland
- Laurent Orgéas, CNRS - Université de Grenoble, France
- Togay Ozbakkaloglu, University of Hertfordshire, United Kingdom
- Marián Palcut, Slovak University of Technology in Bratislava, Slovakia
- Davide Palumbo, Politecnico di Bari, Italy
- Gianfranco Palumbo, Politecnico di Bari, Italy
- Zbyšek Pavlík, Czech Technical University, Czech Republic
- Alessandro Pegoretti, Universitá di Trento, Italy
- Gianluca Percoco, Politecnico di Bari, Italy
- Andrea Petrella, Polytechnic University of Bari, Italy
- Claudio Pettinari, Università di Camerino, Italy
- Giorgio Pia, Università degli Studi di Cagliari, Italy
- Daniela Pilone, University of Roma La Sapienza, Italy
- Teresa M. Piqué, Universidad de Buenos Aires, Argentina
- Candido Fabrizio Pirri, Politecnico di Torino, Italy
- Marinos Pitsikalis, University of Athens, Greece
- Alain Portavoce, Institut Materiaux Microelectronique Nanosciences de Provence, France
- Simon C. Potter, Product Innovation Composites Innovation Centre, Canada
- Ulrich Prahl, Freiberg University of Mining and Technology, Germany
- Ramadhansyah Putra Jaya, Universiti Malaysia Pahang, Malaysia
- Veena Ragupathi, Hindustan Institute of Technology and Science, Chennai, India
- Shailendra Rajput, Ariel University, Israel, Israel
- Kawaljit Randhawa, Charotar University of Science and Technology, India
- Baskaran Rangasamy, Department of Physics, School of Mathematics and Natural Sciences, The Copperbelt University, Zambia
- Ghulam Rasool, Institute of Intelligent Machinery, Faculty of Materials and Manufacturing, Beijing University of Technology, Beijing,100124, China, China
- Manijeh Razeghi, Northwestern University, USA
- Paulo Reis, Universidade da Beira Interior, Portugal
- Hilda E. Reynel-Avila, Tecnológico Nacional de México campus Aguascalientes, Mexico
- Yuri Ribakov, Ariel University, Israel
- Aniello Riccio, University of Campania "Luigi Vanvitelli", Italy
- Anna Richelli, University of Brescia, Italy
- Antonio Riveiro, University of Vigo, Spain
- Marco Rossi, Sapienza University of Rome, Italy
- Fernando Rubio-Marcos, Instituto de Cerámica y Vidrio, Spain
- Francesco Ruffino, University of Catania, Italy
- Pietro Russo, Università di Napoli “Federico II”, Italy
- Giuseppe Ruta, Sapienza University of Roma, Italy
- Sachin Salunkhe, Vel Tech Rangarajan Dr.Sagunthala R&D Institute of Science and Technology, India
- F.H. Samuel, Université du Québec à Chicoutimi, Canada
- Carlo Santulli, Università Degli Studi di Camerino, Italy
- Fabrizio Sarasini, Universita di Roma, Italy
- Senthil Kumaran Selvaraj, Vellore Institute of Technology (VIT), India
- Raffaele Sepe, University of Naples Federico II, Italy
- Aabid H Shalla, Islamic University of Science and Technology, India
- Poorva Sharma, Luzhou Vocational and Technical College, China
- Mercedes Solla, University of Vigo, Spain
- Tushar Sonar, South Ural State University, Russia
- Donato Sorgente, Università degli Studi della Basilicata, Italy
- Charles C. Sorrell, University of New South Wales, Australia
- Andres Sotelo, Universidad de Zaragoza, Spain
- Damien Soulat, Ecole Nationale des Arts et Industries Textiles, France
- Adolfo Speghini, Università di Verona, Italy
- Antonino Squillace, University of Napoli Federico II, Italy
- Koichi Sugimoto, Shinshu University, Japan
- Jirapornchai Suksaeree, Rangsit University, Thailand
- Baozhong Sun, Donghua University, China
- Sam-Shajing Sun, Norfolk State University, USA
- Xiaolong Sun, Guangdong University of Technology, China
- Shengwen Tang, Wuhan University, China
- Yongding Tian, Southwest Jiaotong University, China
- Hao Tong, Tsinghua University , China
- Miguel Angel Torres, Universidad de Zaragoza, Spain
- Laszlo Toth, Université de Lorraine, France
- Achim Trampert, Paul-Drude-Institut für Festköperelektronik, Germany
- Tomasz Trzepieciński, Rzeszow University of Technology, Poland
- Kavimani V, Karpagam Academy of Higher Education, India
- Matjaz Valant, University of Nova Gorica, Slovenia
- Luca Valentini, Università di Perugia, Italy
- Mostafa Vamegh, Department of Civil Engineering, South Tehran Branch, Islamic Azad University, Iran
- Lijing Wang, RMIT University, Australia
- Zhongchang Wang, International Iberian Nanotechnology Laboratory, Portugal
- Jörg M. K. Wiezorek, University of Pittsburgh, USA
- Guosong Wu, Hohai University, China
- Junhui Xiao, Southwest University of Science and Technology, China
- Guoqiang Xie, Professor, School of Materials Science and Engineering, Harbin Institute of Technology (Shenzhen), China
- Jinyang Xu, Shanghai Jiao Tong University, China
- Anil Singh Yadav, IES College of Technology, Bhopal, India
- Yee-wen Yen, National Taiwan University of Science and Technology, Taiwan
- Hao Yi, Chongqing University, China
- Wenbin Yi, Nanjing University of Science and Technology, China
- Tetsu Yonezawa, Hokkaido University, Japan
- Hiroshi Yoshihara, Shimane University, Japan
- Bin Yu, Southeast University, China
- Dongdong Yuan, Chang'an University, China
- Rahadian Zainul, Chemistry Department, Faculty of Mathematics and Natural Sciences, Universitas Negeri Padang, Indonesia
- Lenka Zajíčková, Masaryk University, Czech Republic
- Zhigang Zang, Chongqing University, China
- Michele Zappalorto, University of Padova, Italy
- Gang Zhang, Institute of High Performance Computing ASTAR, Singapore
- Jinghuai Zhang, Harbin Engineering University, China
- You Zhou, National Institute of Advanced Industrial Science and Technology, Japan
- Hongtao Zhu, University of Wollongong, Australia
- Robert Černý, Czech Technical University in Prague, Czech Republic
Journal metricsAcceptance rate42%
Submission to final decision59 days
Acceptance to publication24 days
CiteScore2.800
Journal Citation Indicator-
Impact Factor-
Submit
