Table of Contents
Advances in Optical Technologies
Volume 2011, Article ID 321807, 4 pages
Research Article

A Diode-Laser-System for Laser-Assisted Bending of Brittle Materials

1Institute of Production Engineering and Laser Technology, Vienna University of Technology, Gusshausstr 30, A-1040 Vienna, Austria
2Oberösterreichisches Laserzentrum, Gaswerkgasse 4, A-4810 Gmunden, Austria

Received 15 February 2011; Accepted 20 May 2011

Academic Editor: José Luis Ocaña-Moreno

Copyright © 2011 F. Bammer et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. F. Vollertsen, “An analytical model for laser bending,” Lasers in Engineering, vol. 2, pp. 261–276, 1994. View at Google Scholar
  2. D. Schuöcker, C. Zeinar et al., “Laser assisted bending,” in Proceedings of the 3rd Laser Assisted Net shape Engineering, pp. 475–482, 2001.
  3. M. Geiger, M. Merklein, and A. Otto, “Laser assisted bending of complex-phase steel,” Production Engineering, vol. 2, no. 10, pp. 13–16, 2004. View at Google Scholar
  4. G. Erbert, A. Bärwolff, J. Sebastian, and J. Tomm, “High-power broad-area diode lasers and laser bars,” in High-Power Diode Lasers, R. Diehl, Ed., vol. 78 of Topics Appl. Phys., pp. 173–223, Springer, Berlin, Germany, 2000. View at Google Scholar