Table of Contents
Advances in Optical Technologies
Volume 2012, Article ID 765953, 6 pages
http://dx.doi.org/10.1155/2012/765953
Research Article

Porosity and Inclusion Detection in CFRP by Infrared Thermography

1C.I.R.A. Italian Aerospace Research Centre, via Maiorise snc, 81043 Capua, Italy
2Department of Aerospace Engineering, University of Naples Federico II, 80125 Naples, Italy
3Department of Aerospace Engineering (DIAS), University of Naples Federico II, Via Claudio, 21 80125 Naples, Italy
4Department of Aerospace Engineering (DIAS), University of Naples Federico II, P.le Tecchio, 21 80125 Naples, Italy

Received 6 August 2012; Accepted 22 October 2012

Academic Editor: Laura Abbozzo Ronchi

Copyright © 2012 C. Toscano et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. A. A. Baker, S. Dutton, and D. Kelly, Composite Materials for Aircraft Structures, AIAA Education Series, 2nd edition, 2004.
  2. http://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/20090014807_2009014230.pdf.
  3. C. Beine, C. Boller, U. Netzelmann et al., “NDT for CFRP aeronautical components a comparative study,” in Proceedings of the NDT in Aerospace, Hamburg, Germany, November 2010.
  4. C. Meola and G. M. Carlomagno, “Infrared thermography in non-destructive inspection: theory and practice,” in Recent Advances in Non Destructive Inspection, C. Meola, Ed., pp. 89–123, Nova Science Publisher, 2010. View at Google Scholar
  5. X. Maldague, Nondestructive Evaluation of Materials by Infrared Thermography, Springer, New York, NY, USA, 1993.
  6. J. Rantala, D. Wu, A. Salerno, and G. Busse, “Lock-in thermography with mechanical loss angle heating at ultrasonic frequencies,” in Proceedings of the Eurotherm Seminar, vol. 50, Stuttgart, Germany, September 1996.
  7. E. Grinzato, S. Marinetti, and P. G. Bison, “NDE of porosity in CFRP by multiple thermographic techniques,” in Thermosense XXIV, vol. 4710 of Proceedings of SPIE, pp. 588–598, April 2002. View at Publisher · View at Google Scholar · View at Scopus
  8. A. Ciliberto, G. Cavaccini, O. Salvetti et al., “Porosity detection in composite aeronautical structures,” Infrared Physics and Technology, vol. 43, no. 3-5, pp. 139–143, 2002. View at Publisher · View at Google Scholar · View at Scopus
  9. G. Hendorfer, G. Mayr, G. Zauner, M. Haslhofer, and R. Pree, “Quantitative determination of porosity by active thermography,” in Review of Progress in Quantitative Nondestructive Evaluation, vol. 894, pp. 702–708, August 2006. View at Publisher · View at Google Scholar · View at Scopus
  10. G. Mayr and G. Handorfer, “Porosity determination by pulsed thermography in reflection mode,” in Proceedings of the 10th International Conference on Quantitative InfraRed Thermography, Quebec, Canada, July 2010.
  11. C. Meola, “Nondestructive evaluation of materials with rear heating lock-in thermography,” IEEE Sensors Journal, vol. 7, no. 10, pp. 1388–1389, 2007. View at Publisher · View at Google Scholar · View at Scopus
  12. W. J. Parker, R. J. Jenkins, C. P. Butler, and G. L. Abbott, “Flash method of determining thermal diffusivity, heat capacity, and thermal conductivity,” Journal of Applied Physics, vol. 32, no. 9, pp. 1679–1684, 1961. View at Publisher · View at Google Scholar · View at Scopus