Table of Contents
Advances in Optical Technologies
Volume 2013, Article ID 415837, 7 pages
http://dx.doi.org/10.1155/2013/415837
Research Article

Neural Network Modeling for Prediction of Weld Bead Geometry in Laser Microwelding

1Department of Mechanical and Manufacturing Engineering, Faculty of Engineering, Universiti Putra Malaysia, 43400 Serdang, Selangor, Malaysia
2Graduate School of Natural Science and Technology, Okayama University, 3-1-1 Tsushimanaka, Kita-ku, Okayama 700-8530, Japan

Received 29 June 2013; Accepted 14 October 2013

Academic Editor: Michael Fiddy

Copyright © 2013 Mohd Idris Shah Ismail et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

Mohd Idris Shah Ismail, Yasuhiro Okamoto, and Akira Okada, “Neural Network Modeling for Prediction of Weld Bead Geometry in Laser Microwelding,” Advances in Optical Technologies, vol. 2013, Article ID 415837, 7 pages, 2013. https://doi.org/10.1155/2013/415837.