Table of Contents Author Guidelines Submit a Manuscript
Advances in Physical Chemistry
Volume 2017, Article ID 8521623, 12 pages
https://doi.org/10.1155/2017/8521623
Research Article

The Effect of Concentration of Lawsonia inermis as a Corrosion Inhibitor for Aluminum Alloy in Seawater

1School of Ocean Engineering, Universiti Malaysia Terengganu, 21030 Kuala Terengganu, Terengganu, Malaysia
2School of Fundamental Science, Universiti Malaysia Terengganu, 21030 Kuala Terengganu, Terengganu, Malaysia

Correspondence should be addressed to W. B. Wan Nik; ym.ude.tmu@inaskin

Received 11 October 2016; Revised 2 January 2017; Accepted 23 January 2017; Published 16 February 2017

Academic Editor: Claudio Fontanesi

Copyright © 2017 F. Zulkifli et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. S. Ananth, P. Vivek, T. Arumanayagam, and P. Murugakoothan, “Natural dye extract of lawsonia inermis seed as photo sensitizer for titanium dioxide based dye sensitized solar cells,” Spectrochimica Acta Part A: Molecular and Biomolecular Spectroscopy, vol. 128, pp. 420–426, 2014. View at Publisher · View at Google Scholar
  2. S. Ali, T. Hussain, and R. Nawaz, “Optimization of alkaline extraction of natural dye from Henna leaves and its dyeing on cotton by exhaust method,” Journal of Cleaner Production, vol. 17, no. 1, pp. 61–66, 2009. View at Publisher · View at Google Scholar · View at Scopus
  3. F. Suedile, F. Robert, C. Roos, and M. Lebrini, “Corrosion inhibition of zinc by Mansoa alliacea plant extract in sodium chloride media: extraction, characterization and electrochemical studies,” Electrochimica Acta, vol. 133, pp. 631–638, 2014. View at Publisher · View at Google Scholar · View at Scopus
  4. D. Prabhu and P. Rao, “Coriandrum sativum L.—a novel green inhibitor for the corrosion inhibition of aluminium in 1.0 M phosphoric acid solution,” Journal of Environmental Chemical Engineering, vol. 1, no. 4, pp. 676–683, 2013. View at Publisher · View at Google Scholar · View at Scopus
  5. M. Chen, J.-M. Lee, I. S. Nurhati, A. D. Switzer, and E. A. Boyle, “Isotopic record of lead in Singapore Straits during the last 50 years: spatial and temporal variations,” Marine Chemistry, vol. 168, pp. 49–59, 2015. View at Publisher · View at Google Scholar · View at Scopus
  6. A. Ehsani, M. Mahjani, M. Hosseini, R. Safari, R. Moshrefi, and H. M. Shiri, “Evaluation of Thymus vulgaris plant extract as an eco-friendly corrosion inhibitor for stainless steel 304 in acidic solution by means of electrochemical impedance spectroscopy, electrochemical noise analysis and density functional theory,” Journal of Colloid and Interface Science, vol. 490, pp. 444–451, 2017. View at Publisher · View at Google Scholar
  7. A. Singh, I. Ahamad, and M. A. Quraishi, “Piper longum extract as green corrosion inhibitor for aluminium in NaOH solution,” Arabian Journal of Chemistry, vol. 9, no. 2, pp. S1584–S1589, 2012. View at Publisher · View at Google Scholar · View at Scopus
  8. E. Ituen, O. Akaranta, A. James, and S. Sun, “Green and sustainable local biomaterials for oilfield chemicals: Griffonia simplicifolia extract as steel corrosion inhibitor in hydrochloric acid,” Sustainable Materials and Technologies, vol. 11, pp. 12–18, 2017. View at Publisher · View at Google Scholar
  9. M. Jokar, T. S. Farahani, and B. Ramezanzadeh, “Electrochemical and surface characterizations of morus alba pendula leaves extract (MAPLE) as a green corrosion inhibitor for steel in 1M HCl,” Journal of the Taiwan Institute of Chemical Engineers, vol. 63, pp. 436–452, 2016. View at Publisher · View at Google Scholar · View at Scopus
  10. H. Wang, M. Gao, Y. Guo, Y. Yang, and R. Hu, “A natural extract of tobacco rob as scale and corrosion inhibitor in artificial seawater,” Desalination, vol. 398, pp. 198–207, 2016. View at Publisher · View at Google Scholar · View at Scopus
  11. D. Kirkland and D. Marzin, “An assessment of the genotoxicity of 2-hydroxy-1,4-naphthoquinone, the natural dye ingredient of Henna,” Mutation Research—Genetic Toxicology and Environmental Mutagenesis, vol. 537, no. 2, pp. 183–199, 2003. View at Publisher · View at Google Scholar · View at Scopus
  12. K. N. Jallad and C. Espada-Jallad, “Lead exposure from the use of Lawsonia inermis (Henna) in temporary paint-on-tattooing and hair dying,” Science of the Total Environment, vol. 397, no. 1-3, pp. 244–250, 2008. View at Publisher · View at Google Scholar · View at Scopus
  13. S. Salunke-Gawali, L. Kathawate, Y. Shinde, V. G. Puranik, and T. Weyhermüller, “Single crystal X-ray structure of Lawsone anion: evidence for coordination of alkali metal ions and formation of naphthosemiquinone radical in basic media,” Journal of Molecular Structure, vol. 1010, pp. 38–45, 2012. View at Publisher · View at Google Scholar · View at Scopus
  14. E. C. Jeyaseelan, S. Jenothiny, M. K. Pathmanathan, and J. P. Jeyadevan, “Antibacterial activity of sequentially extracted organic solvent extracts of fruits, flowers and leaves of Lawsonia inermis L. from Jaffna,” Asian Pacific Journal of Tropical Biomedicine, vol. 2, no. 10, pp. 798–802, 2012. View at Publisher · View at Google Scholar · View at Scopus
  15. I. Abulyazid, E. M. E. Mahdy, and R. M. Ahmed, “Biochemical study for the effect of henna (Lawsonia inermis) on Escherichia coli,” Arabian Journal of Chemistry, vol. 6, no. 3, pp. 265–273, 2013. View at Publisher · View at Google Scholar · View at Scopus
  16. S. Rajendran, M. Agasta, R. Bama Devi, B. Shyamala Devi, K. Rajam, and J. Jayasundari, “Corrosion inhibition by an aqueous extract of Henna leaves (Lawsonia inermis L),” Zaštita Materijala, vol. 50, pp. 77–84, 2009. View at Google Scholar
  17. A. Ostovari, S. M. Hoseinieh, M. Peikari, S. R. Shadizadeh, and S. J. Hashemi, “Corrosion inhibition of mild steel in 1 M HCl solution by henna extract: a comparative study of the inhibition by henna and its constituents (Lawsone, Gallic acid, α-d-Glucose and Tannic acid),” Corrosion Science, vol. 51, no. 9, pp. 1935–1949, 2009. View at Publisher · View at Google Scholar · View at Scopus
  18. A. Motalebi, M. Nasr-Esfahani, R. Ali, and M. Pourriahi, “Improvement of corrosion performance of 316L stainless steel via PVTMS/henna thin film,” Progress in Natural Science: Materials International, vol. 22, no. 5, pp. 392–400, 2012. View at Publisher · View at Google Scholar
  19. J. Buchweishaija, “Phytochemicals as green corrosion inhibitors in various corrosive media: a review,” Tanzania Journal of Science, vol. 35, pp. 77–92, 2009. View at Google Scholar
  20. K. F. Khaled and N. Hackerman, “Investigation of the inhibitive effect of ortho-substituted anilines on corrosion of iron in 1 M HCl solutions,” Electrochimica Acta, vol. 48, no. 19, pp. 2715–2723, 2003. View at Publisher · View at Google Scholar · View at Scopus
  21. B. Liu, H. Xi, Z. Li, and Q. Xia, “Adsorption and corrosion-inhibiting effect of 2-(2-{[2-(4-Pyridylcarbonyl) hydrazono]methyl}phenoxy)acetic acid on mild steel surface in seawater,” Applied Surface Science, vol. 258, no. 17, pp. 6679–6687, 2012. View at Publisher · View at Google Scholar · View at Scopus
  22. Z. Hu, L. Wan, S. Lü, P. Zhu, and S. Wu, “Research on the microstructure, fatigue and corrosion behavior of permanent mold and die cast aluminum alloy,” Materials and Design, vol. 55, pp. 353–360, 2014. View at Publisher · View at Google Scholar · View at Scopus
  23. H.-C. Jiang, L.-Y. Ye, X.-M. Zhang, G. Gu, P. Zhang, and Y.-L. Wu, “Intermetallic phase evolution of 5059 aluminum alloy during homogenization,” Transactions of Nonferrous Metals Society of China, vol. 23, no. 12, pp. 3553–3560, 2013. View at Publisher · View at Google Scholar · View at Scopus
  24. S. Ferraris and L. M. Volpone, “Aluminum alloys in third millennium shipbuilding: Materials, technologies, perspectives,” in Proceedings of the 5th International Forum on Aluminum Ships, pp. 1–10, Tokyo, Japan, 2005.
  25. S. Benson, J. Downes, and R. S. Dow, “Load shortening characteristics of marine grade aluminium alloy plates in longitudinal compression,” Thin-Walled Structures, vol. 70, pp. 19–32, 2013. View at Publisher · View at Google Scholar · View at Scopus
  26. M. Ashjari, A. Mostafapour Asl, and S. Rouhi, “xperimental investigation on the effect of process environment on the mechanical properties of AA5083/Al2O3 nanocomposite fabricated via friction stir processing,” Materials Science and Engineering A, vol. 645, pp. 40–46, 2015. View at Publisher · View at Google Scholar · View at Scopus
  27. A. S. Samsudin, W. M. Khairul, and M. I. N. Isa, “Characterization on the potential of carboxy methylcellulose for application as proton conducting biopolymer electrolytes,” Journal of Non-Crystalline Solids, vol. 358, no. 8, pp. 1104–1112, 2012. View at Publisher · View at Google Scholar · View at Scopus
  28. S. Elavarasan and M. Gopalakrishnan, “Synthesis, structural analysis, theoretical studies of some lawsone derivatives,” Spectrochimica Acta Part A: Molecular and Biomolecular Spectroscopy, vol. 133, pp. 1–6, 2014. View at Publisher · View at Google Scholar
  29. A. Poursaee, “Potentiostatic transient technique, a simple approach to estimate the corrosion current density and Stern-Geary constant of reinforcing steel in concrete,” Cement and Concrete Research, vol. 40, no. 9, pp. 1451–1458, 2010. View at Publisher · View at Google Scholar · View at Scopus
  30. A. Y. El-Etre, M. Abdallah, and Z. E. El-Tantawy, “Corrosion inhibition of some metals using lawsonia extract,” Corrosion Science, vol. 47, no. 2, pp. 385–395, 2005. View at Publisher · View at Google Scholar · View at Scopus
  31. Y. Takeda and M. O. Fatope, “New phenolic glucosides from Lawsonia inermis,” Journal of Natural Products, vol. 51, no. 4, pp. 725–729, 1988. View at Publisher · View at Google Scholar · View at Scopus
  32. N. Uddin, B. S. Siddiqui, S. Begum et al., “Bioactive flavonoids from the leaves of Lawsonia alba (Henna),” Phytochemistry Letters, vol. 4, no. 4, pp. 454–458, 2011. View at Publisher · View at Google Scholar · View at Scopus
  33. K. E. Jasim, S. Al-Dallal, and A. M. Hassan, “Henna (Lawsonia inermis L.) dye-sensitized nanocrystalline titania solar cell,” Journal of Nanotechnology, vol. 2012, Article ID 167128, 6 pages, 2012. View at Publisher · View at Google Scholar · View at Scopus
  34. T. L. Brown, “The infrared carbonyl absorption in some p-quinones and related substances,” Spectrochimica Acta, vol. 18, no. 4, pp. 1065–1071, 1962. View at Publisher · View at Google Scholar · View at Scopus
  35. B. R. Mikhaeil, F. A. Badria, G. T. Maatooq, and M. M. A. Amer, “Antioxidant and immunomodulatory constituents of henna leaves,” Zeitschrift fur Naturforschung - Section C Journal of Biosciences, vol. 59, no. 7-8, pp. 468–476, 2004. View at Google Scholar · View at Scopus
  36. M. Slifkin, “Infrared spectra of some organic charge-transfer complexes,” Spectrochimica Acta Part A: Molecular Spectroscopy, vol. 29, no. 5, pp. 835–838, 1973. View at Publisher · View at Google Scholar
  37. S. Oramas-Royo, C. Torrejón, I. Cuadrado et al., “Synthesis and cytotoxic activity of metallic complexes of lawsone,” Bioorganic and Medicinal Chemistry, vol. 21, no. 9, pp. 2471–2477, 2013. View at Publisher · View at Google Scholar · View at Scopus
  38. A. E. Musa and G. A. Gasmelseed, “Characterization of Lawsonia inermis (henna) as vegetable tanning material,” Journal of Forest Products & Industries, vol. 1, no. 2, pp. 35–40, 2012. View at Google Scholar
  39. W. B. W. Nik, F. Zulkifli, O. Sulaiman, K. B. Samo, and R. Rosliza, “Study of Henna (Lawsonia inermis) as natural corrosion inhibitor for aluminum alloy in seawater,” IOP Conference Series: Materials Science and Engineering, vol. 36, no. 1, Article ID 012043, 2012. View at Publisher · View at Google Scholar
  40. A. Fernandez, A. George, and V. K. Remadevi, “Synthesis, characterization, antioxidant, DNA cleavage and cytotoxic studies of amino derivatives of lawsone,” International Journal of Phytopharmacy, vol. 1, pp. 36–41, 2013. View at Google Scholar
  41. L. Li, X. Zhang, J. Lei, J. He, S. Zhang, and F. Pan, “Adsorption and corrosion inhibition of Osmanthus fragran leaves extract on carbon steel,” Corrosion Science, vol. 63, pp. 82–90, 2012. View at Publisher · View at Google Scholar · View at Scopus
  42. X.-H. Li, S.-D. Deng, and H. Fu, “Inhibition by Jasminum nudiflorum Lindl. leaves extract of the corrosion of cold rolled steel in hydrochloric acid solution,” Journal of Applied Electrochemistry, vol. 40, no. 9, pp. 1641–1649, 2010. View at Publisher · View at Google Scholar · View at Scopus
  43. N. D. Nam, A. Somers, M. Mathesh et al., “The behaviour of praseodymium 4-hydroxycinnamate as an inhibitor for carbon dioxide corrosion and oxygen corrosion of steel in NaCl solutions,” Corrosion Science, vol. 80, pp. 128–138, 2014. View at Publisher · View at Google Scholar · View at Scopus
  44. A. R. Hosein Zadeh, I. Danaee, and M. H. Maddahy, “Thermodynamic and adsorption behaviour of medicinal nitramine as a corrosion inhibitor for AISI steel alloy in HCl solution,” Journal of Materials Science and Technology, vol. 29, no. 9, pp. 884–892, 2013. View at Publisher · View at Google Scholar · View at Scopus
  45. X. Li and S. Deng, “Inhibition effect of Dendrocalamus brandisii leaves extract on aluminum in HCl, H3PO4 solutions,” Corrosion Science, vol. 65, pp. 299–308, 2012. View at Publisher · View at Google Scholar · View at Scopus
  46. G. T. Burstein and R. J. Cinderey, “The potential of freshly generated metal surfaces determined from the guillotined electrode-a new technique,” Corrosion Science, vol. 32, no. 11, pp. 1195–1211, 1991. View at Publisher · View at Google Scholar · View at Scopus
  47. L. Johansson, “Synergistic effects of air pollutants on the atmospheric corrosion of metals and calcareous stones,” Marine Chemistry, vol. 30, pp. 113–122, 1990. View at Publisher · View at Google Scholar
  48. M. Metikoš-Huković, R. Babić, and Z. Grubač, “Corrosion protection of aluminium in acidic chloride solutions with nontoxic inhibitors,” Journal of Applied Electrochemistry, vol. 28, no. 4, pp. 433–439, 1998. View at Publisher · View at Google Scholar · View at Scopus
  49. A. Singh, Y. Lin, W. Liu et al., “Plant derived cationic dye as an effective corrosion inhibitor for 7075 aluminum alloy in 3.5% NaCl solution,” Journal of Industrial and Engineering Chemistry, vol. 20, no. 6, pp. 4276–4285, 2014. View at Publisher · View at Google Scholar · View at Scopus
  50. S. Khireche, D. Boughrara, A. Kadri, L. Hamadou, and N. Benbrahim, “Corrosion mechanism of Al, Al-Zn and Al-Zn-Sn alloys in 3wt.% NaCl solution,” Corrosion Science, vol. 87, pp. 504–516, 2014. View at Publisher · View at Google Scholar · View at Scopus
  51. R. E. Melchers, “Bi-modal trend in the long-term corrosion of aluminium alloys,” Corrosion Science, vol. 82, pp. 239–247, 2014. View at Publisher · View at Google Scholar
  52. A. M. Abdel-Gaber, B. A. Abd-El-Nabey, I. M. Sidahmed, A. M. El-Zayady, and M. Saadawy, “Inhibitive action of some plant extracts on the corrosion of steel in acidic media,” Corrosion Science, vol. 48, no. 9, pp. 2765–2779, 2006. View at Publisher · View at Google Scholar · View at Scopus
  53. M. H. Hussin and M. J. Kassim, “The corrosion inhibition and adsorption behavior of Uncaria gambir extract on mild steel in 1 M HCl,” Materials Chemistry and Physics, vol. 125, no. 3, pp. 461–468, 2011. View at Publisher · View at Google Scholar · View at Scopus
  54. A. K. Satapathy, G. Gunasekaran, S. C. Sahoo, K. Amit, and P. V. Rodrigues, “Corrosion inhibition by Justicia gendarussa plant extract in hydrochloric acid solution,” Corrosion Science, vol. 51, no. 12, pp. 2848–2856, 2009. View at Publisher · View at Google Scholar · View at Scopus
  55. R. E. Clegg, “Measurements of the interface between 5083 aluminium and liquid mercury using impedance spectroscopy,” Corrosion Science, vol. 52, no. 12, pp. 4028–4034, 2010. View at Publisher · View at Google Scholar · View at Scopus
  56. M. Shabani-Nooshabadi and M. S. Ghandchi, “Santolina chamaecyparissus extract as a natural source inhibitor for 304 stainless steel corrosion in 3.5% NaCl,” Journal of Industrial and Engineering Chemistry, vol. 31, pp. 231–237, 2015. View at Publisher · View at Google Scholar · View at Scopus
  57. G. Ruhi, O. P. Modi, and S. K. Dhawan, “Chitosan-polypyrrole-SiO2 composite coatings with advanced anticorrosive properties,” Synthetic Metals, vol. 200, pp. 24–39, 2015. View at Publisher · View at Google Scholar · View at Scopus
  58. S. M. Abd El Haleem, S. Abd El Wanees, E. E. Abd El Aal, and A. Farouk, “Factors affecting the corrosion behaviour of aluminium in acid solutions. I. Nitrogen and/or sulphur-containing organic compounds as corrosion inhibitors for Al in HCl solutions,” Corrosion Science, vol. 68, pp. 1–13, 2013. View at Publisher · View at Google Scholar · View at Scopus
  59. X. Li, S. Deng, and X. Xie, “Experimental and theoretical study on corrosion inhibition of oxime compounds for aluminium in HCl solution,” Corrosion Science, vol. 81, pp. 162–175, 2014. View at Publisher · View at Google Scholar · View at Scopus
  60. I. Ahamad, R. Prasad, and M. A. Quraishi, “Adsorption and inhibitive properties of some new Mannich bases of Isatin derivatives on corrosion of mild steel in acidic media,” Corrosion Science, vol. 52, no. 4, pp. 1472–1481, 2010. View at Publisher · View at Google Scholar · View at Scopus
  61. R. Rosliza, W. B. Wan Nik, and H. B. Senin, “The effect of inhibitor on the corrosion of aluminum alloys in acidic solutions,” Materials Chemistry and Physics, vol. 107, no. 2-3, pp. 281–288, 2008. View at Publisher · View at Google Scholar · View at Scopus
  62. S. K. Milonjić, “A consideration of the correct calculation of thermodynamic parameters of adsorption,” Journal of the Serbian Chemical Society, vol. 72, no. 12, pp. 1363–1367, 2007. View at Publisher · View at Google Scholar · View at Scopus
  63. P. Mourya, S. Banerjee, and M. M. Singh, “Corrosion inhibition of mild steel in acidic solution by Tagetes erecta (Marigold flower) extract as a green inhibitor,” Corrosion Science, vol. 85, pp. 352–363, 2014. View at Publisher · View at Google Scholar · View at Scopus
  64. P. Mohan and G. P. Kalaignan, “1, 4-Bis (2-nitrobenzylidene) thiosemicarbazide as effective corrosion inhibitor for mild steel,” Journal of Materials Science and Technology, vol. 29, no. 11, pp. 1096–1100, 2013. View at Publisher · View at Google Scholar · View at Scopus
  65. H. Ju, Y. Ju, and Y. Li, “Berberine as an Environmental-Friendly Inhibitor for Hot-Dip Coated Steels in Diluted Hydrochloric Acid,” Journal of Materials Science & Technology, vol. 28, no. 9, pp. 809–816, 2012. View at Publisher · View at Google Scholar
  66. I. Danaee, M. N. Khomami, and A. A. Attar, “Corrosion of AISI 4130 steel alloy under hydrodynamic condition in ethylene glycol + water + NO2 solution,” Journal of Materials Science and Technology, vol. 29, no. 1, pp. 89–96, 2013. View at Publisher · View at Google Scholar · View at Scopus
  67. E. A. Noor and A. H. Al-Moubaraki, “Thermodynamic study of metal corrosion and inhibitor adsorption processes in mild steel/1-methyl-4[4′(-X)-styryl pyridinium iodides/hydrochloric acid systems,” Materials Chemistry and Physics, vol. 110, no. 1, pp. 145–154, 2008. View at Publisher · View at Google Scholar · View at Scopus