Table of Contents Author Guidelines Submit a Manuscript
ElectroComponent Science and Technology
Volume 3, Issue 1, Pages 21-42
http://dx.doi.org/10.1155/APEC.3.21

Adhesion Measurement of Thin Films

MHV System Products Assurance, IBM Corporation, Poughkeepsie 12602, N.Y., USA

Received 18 August 1975

Copyright © 1976 Hindawi Publishing Corporation. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Citations to this Article [256 citations]

The following is the list of published articles that have cited the current article.

  • M.J. Berry, T.G. Tessier, I. Turlik, G.M. Adema, D.C. Burdeaux, J.N. Carr, and P. Garrou, “Benzocyclobutene as a dielectric for multichip module fabrication,” 40th Conference Proceedings on Electronic Components and Technology, pp. 746–750, . View at Publisher · View at Google Scholar
  • Wei Ma, Jilin Yu, Haiyang Zhou, Xiaodong Zhu, and Rujuan Zhan, “Adhesion's macroscopic exhibition of CVD diamond films on Si substrate and its relationship with film's microstructure,” International Symposium on Electronic Materials and Packaging (EMAP2000) (Cat. No.00EX458), pp. 394–397, . View at Publisher · View at Google Scholar
  • R.C. Addison, M. Somekh, and G.A.D. Briggs, “Techniques for the Characterization of Film Adhesion,” pp. 775–782, . View at Publisher · View at Google Scholar
  • K. Bhasin, D.B. Jones, S. Sinharoy, and W.J. James, “The adhesion of thin plasma-polymerized organic films to metal substrates,” Thin Solid Films, vol. 45, no. 1, pp. 195–202, 1977. View at Publisher · View at Google Scholar
  • K. L. Mittal, “The role of the interface in adhesion phenomena,” Polymer Engineering and Science, vol. 17, no. 7, pp. 467–473, 1977. View at Publisher · View at Google Scholar
  • R.C. Bray, C.F. Quate, J. Calhoun, and R. Koch, “Film adhesion studies with the acoustic microscpe,” Thin Solid Films, vol. 74, no. 2, pp. 295–302, 1980. View at Publisher · View at Google Scholar
  • Mittal, “Interfacial Chemistry And Adhesion: Recent Developments And Prospects,” Pure and Applied Chemistry, vol. 52, no. 5, pp. 1295–1305, 1980. View at Publisher · View at Google Scholar
  • Rothman, “Properties of Thin Polyimide Films,” Journal of the Electrochemical Society, vol. 127, no. 10, pp. 2216–2220, 1980. View at Publisher · View at Google Scholar
  • Arthur M. Wilson, “Polyimide insulators for multilevel interconnections,” Thin Solid Films, vol. 83, no. 2, pp. 145–163, 1981. View at Publisher · View at Google Scholar
  • H.K. Pulker, A.J. Perry, and R. Berger, “Adhesion,” Surface Technology, vol. 14, no. 1, pp. 25–39, 1981. View at Publisher · View at Google Scholar
  • K.L. Mittal, “Microscopic Aspects of Adhesion: Recent Trends and Prospects,” Microscopic Aspects of Adhesion and Lubrication, Proceedings of the 34th International Meeting of the Société de Chimie Physique, vol. 7, pp. 153–165, 1981. View at Publisher · View at Google Scholar
  • A.A. Roche, M.J. Romand, and J.S. Solomon, “Prebonding Treatment Effects on Bond Joint Properties of Adhesively Bonded Titanium,” Microscopic Aspects of Adhesion and Lubrication, Proceedings of the 34th International Meeting of the Société de Chimie Physique, vol. 7, pp. 333–342, 1981. View at Publisher · View at Google Scholar
  • Sadhir, James, Yasuda, Sharma, Nichols, and Haln, “The adhesion of glow-discharge polymers, Silastic and Parylene to implantable platinum electrodes: results of tensile pull tests after exposure to isotonic sodium chloride,” Biomaterials, vol. 2, no. 4, pp. 239–243, 1981. View at Publisher · View at Google Scholar
  • Baun, “The Effect of Etching on Ti6A14V Interfacial Chemistry and Adhesion to Evaporated Gold and a Commercial Adhesive,” The Journal of Adhesion, vol. 12, no. 2, pp. 81–98, 1981. View at Publisher · View at Google Scholar
  • H.K. Pulker, “Mechanical properties of optical films,” Thin Solid Films, vol. 89, no. 2, pp. 191–204, 1982. View at Publisher · View at Google Scholar
  • A.G. Dirks, and J.J. Van Den Broek, “Adhesion, internal stress, microstructure and resistivity of thin alloy films of aluminium, copper and silver,” Thin Solid Films, vol. 96, no. 3, pp. 257–263, 1982. View at Publisher · View at Google Scholar
  • M. El-Shabasy, B. Szikora, G. Petö, I. Szabó, and K.L. Mittal, “Investigation of multilayer systems by the scratch method,” Thin Solid Films, vol. 109, no. 2, pp. 127–136, 1983. View at Publisher · View at Google Scholar
  • W. L. Baun, “Determining Locus of Failure with Modern Surface Analysis Methods,” Adhesion Aspects of Polymeric Coatings, pp. 131–146, 1983. View at Publisher · View at Google Scholar
  • R. Järvinen, T. Mäntylä, and P. Kettunen, “Improved adhesion between a sputtered alumina coating and a copper substrate,” Thin Solid Films, vol. 114, no. 3, pp. 311–317, 1984. View at Publisher · View at Google Scholar
  • Darbha Suryanarayana, and Mittal, “Effect of pH of silane solution on the adhesion of polyimide to a silica substrate,” Journal of Applied Polymer Science, vol. 29, no. 6, pp. 2039–2043, 1984. View at Publisher · View at Google Scholar
  • D. B. Marshall, and A. G. Evans, “Measurement of adherence of residually stressed thin films by indentation. I. Mechanics of interface delamination,” Journal of Applied Physics, vol. 56, no. 10, pp. 2632, 1984. View at Publisher · View at Google Scholar
  • Konczos, Hajtó, El-Shabasy, Pogány, and Szikora, “Scratch-Profiles Study in Thin Films Using Sem and Eds,” ElectroComponent Science and Technology, vol. 11, no. 3, pp. 237–241, 1984. View at Publisher · View at Google Scholar
  • R.E Van de Leest, “Adhesion measurements of thin metal films on plastics,” Thin Solid Films, vol. 124, no. 3-4, pp. 335–341, 1985. View at Publisher · View at Google Scholar
  • Berndt, “Acoustic emission evaluation of plasma-sprayed thermal barrier coatings,” Journal of Engineering for Gas Turbines and Power, vol. 107, no. 1, pp. 142–146, 1985. View at Publisher · View at Google Scholar
  • Clifford L. Renschler, and Robert J. Martinez, “Study of a potential abrasion-resistant lens coating: Adhesion to PMMA,” Solar Energy, vol. 36, no. 1, pp. 1–2, 1986. View at Publisher · View at Google Scholar
  • Valli, “A review of adhesion test methods for thin hard coatings,” Journal of Vacuum Science and Technology A: Vacuum, Surfaces and Films, vol. 4, no. 6, pp. 3007–3014, 1986. View at Publisher · View at Google Scholar
  • Juhani Valli, and Ulla Mäkelä, “Applications of the scratch test method for coating adhesion assessment,” Wear, vol. 115, no. 1-2, pp. 215–221, 1987. View at Publisher · View at Google Scholar
  • T. Arai, H. Fujita, and M. Watanabe, “Evaluation of adhesion strength of thin hard coatings,” Thin Solid Films, vol. 154, no. 1-2, pp. 387–401, 1987. View at Publisher · View at Google Scholar
  • Sd Phadke, Rn Karekar, Sa Gangal, and Ml Jadhav, “Electrical And Mechanical-Properties Of Ion-Plated Copper Metallization On Dielectric Substrates,” Ieee Transactions On Components Hybrids And Manufacturing Technology, vol. 11, no. 2, pp. 177–183, 1988. View at Publisher · View at Google Scholar
  • D.S. Rickerby, “A review of the methods for the measurement of coating-substrate adhesion,” Surface and Coatings Technology, vol. 36, no. 1-2, pp. 541–557, 1988. View at Publisher · View at Google Scholar
  • A. Kinbara, S. Baba, and A. Kikuchi, “Adhesion measurement of metal films on a Si(111) surface by a microtribometer,” Journal of Adhesion Science and Technology, vol. 2, no. 1, pp. 1–10, 1988. View at Publisher · View at Google Scholar
  • Y.-H. Kim, J. Kim, G.F. Walker, C. Feger, and S.P. Kowalczyk, “Adhesion and interface investigation of polyimide on metals,” Journal of Adhesion Science and Technology, vol. 2, no. 1, pp. 95–105, 1988. View at Publisher · View at Google Scholar
  • Antti O.K. Nieminen, and Jack L. Koenig, “NMR imaging-A promising new adhesive evaluation technique,” Journal of Adhesion Science and Technology, vol. 2, no. 1, pp. 407–414, 1988. View at Publisher · View at Google Scholar
  • P. Darrell Ownby, and Jenq Liu, “Surface energy of liquid copper and single-crystal sapphire and the wetting behavior of copper on sapphire,” Journal of Adhesion Science and Technology, vol. 2, no. 1, pp. 255–269, 1988. View at Publisher · View at Google Scholar
  • Yona Eckstein, “Role of silanes in adhesion-Part I. Dynamic mechanical properties of silane coatings on glass fibers,” Journal of Adhesion Science and Technology, vol. 2, no. 1, pp. 339–348, 1988. View at Publisher · View at Google Scholar
  • Mchargue, and Pawel, “Testing of adhesion of thin films to substrates,” Journal of Adhesion Science and Technology, vol. 2, no. 1, pp. 369–383, 1988. View at Publisher · View at Google Scholar
  • Napolitano, Chudnovsky, and Moet, “The constrained blister test for the energy of interfacial adhesion,” Journal of Adhesion Science and Technology, vol. 2, no. 4, pp. 311–323, 1988. View at Publisher · View at Google Scholar
  • Taylor, Cahen, and Stoner, “Ion beam assisted deposition of thin carbonaceous films II. Adhesion characteristics in aqueous and cathodically delaminating conditions,” Journal of the Electrochemical Society, vol. 135, no. 12, pp. 2943–2952, 1988. View at Publisher · View at Google Scholar
  • Conway, and Thomsin, “The determination of bond strength of polymeric films by indentation debonding,” Journal of Adhesion Science and Technology, vol. 2, no. 3, pp. 227–236, 1988. View at Publisher · View at Google Scholar
  • Nichols, Hahn, and Sharma, “The effect of high energy ‘electrodeless’ plasma polymerized methane polymers on the adhesion characteristics of poly-p-xylylene films,” Journal of Adhesion Science and Technology, vol. 2, no. 1, pp. 59–66, 1988. View at Publisher · View at Google Scholar
  • S.R. Taylor, “Assessing the moisture barrier properties of polymeric coatings using electrical and electrochemical methods,” IEEE Transactions on Electrical Insulation, vol. 24, no. 5, pp. 787–806, 1989. View at Publisher · View at Google Scholar
  • Mark G. Allen, and Stephen D. Senturia, “Application of the island blister test for thin film adhesion measurement,” The Journal of Adhesion, vol. 29, no. 1-4, pp. 219–231, 1989. View at Publisher · View at Google Scholar
  • A.D. Katnani, A. Knoll, and M.A. Mycek, “Effects of environment and heat treatment on an oxygen plasma-treated polyimide surface and its adhesion to a chromium overcoat,” Journal of Adhesion Science and Technology, vol. 3, no. 1, pp. 441–453, 1989. View at Publisher · View at Google Scholar
  • Wojciechowski, and Mendolia, “On the multiple fracture of low-elongation thin films deposited on high-elongation substrates,” Journal of Vacuum Science and Technology A: Vacuum, Surfaces and Films, vol. 7, no. 3, pp. 1282–1288, 1989. View at Publisher · View at Google Scholar
  • W. Sachse, “Measurement of the interfacial strength of fibers and thin films,” Materials Science and Engineering: A, vol. 126, no. 1-2, pp. 133–139, 1990. View at Publisher · View at Google Scholar
  • G.H. Lee, M. Cailler, and S.C. Kwon, “Adhesion studies of magnetron-sputtered copper films on Inconel substrates: Effects of substrate surface pretreatments,” Thin Solid Films, vol. 185, no. 1, pp. 35–55, 1990. View at Publisher · View at Google Scholar
  • L. Shi, H.J. Frankena, and H. Mulder, “Mechanical and optical properties of oxide thin films deposited by pulsed laser reactive evaporation,” Vacuum, vol. 40, no. 4, pp. 399–405, 1990. View at Publisher · View at Google Scholar
  • V.M. Sura, and R. Rhinehart, “Indentation test for adhesion measurement of polyimide films,” Journal of Adhesion Science and Technology, vol. 4, no. 1, pp. 161–168, 1990. View at Publisher · View at Google Scholar
  • Alexopoulos, and O'Sullivan, “Mechanical properties of thin films,” Annual Review of Materials Science, vol. 20, no. 1, pp. 391–420, 1990. View at Publisher · View at Google Scholar
  • P.R. Chalker, S.J. Bull, and D.S. Rickerby, “A review of the methods for the evaluation of coating-substrate adhesion,” Materials Science and Engineering: A, vol. 140, pp. 583–592, 1991. View at Publisher · View at Google Scholar
  • Kwang Yul Kim, and Wolfgang Sachse, “Dynamic fracture test of metal thin films deposited on an insulating substrate by a high current pulse method,” Thin Solid Films, vol. 205, no. 2, pp. 176–181, 1991. View at Publisher · View at Google Scholar
  • H. Freller, A. Hempel, J. Lilge, and H.P. Lorenz, “Influence of intermediate layers and base materials on adhesion of amorphous carbon and metal-carbon coatings,” Diamond and Related Materials, vol. 1, no. 5-6, pp. 563–569, 1992. View at Publisher · View at Google Scholar
  • Vijaya Puri, “Effect of metallization process on the performance of passive microstripline circuits,” Microwave and Optical Technology Letters, vol. 5, no. 11, pp. 585–590, 1992. View at Publisher · View at Google Scholar
  • Narendrnath, and Chun Zhao, “Metallic coatings of high adhesion on plastics via low-temperature arc vapor deposition (LTAVD),” Journal of Adhesion Science and Technology, vol. 6, no. 10, pp. 1179–1182, 1992. View at Publisher · View at Google Scholar
  • Paul H. Wojciechowski, and Michael S. Mendolia, “Fracture and Cracking Phenomena in Thin Films Adhering to High-Elongation Substrates,” Thin Films for Emerging Applications, vol. 16, pp. 271–340, 1992. View at Publisher · View at Google Scholar
  • W. Olbrich, and G. Kampschulte, “Additional ion bombardment in PVD processes generated by a superimposed pulse bias voltage,” Surface and Coatings Technology, vol. 61, no. 1-3, pp. 262–267, 1993. View at Publisher · View at Google Scholar
  • David J. Monk, and David S. Soane, “Interconnect Dielectrics,” Polymers for Electronic & Photonic Application, pp. 119–165, 1993. View at Publisher · View at Google Scholar
  • Shankar K. Venkataraman, William W. Gerberich, John C. Nelson, Alex J. Hsieh, and David L. Kohlstedt, “Continuous microscratch measurements of thin film adhesion strengths,” Journal of Adhesion Science and Technology, vol. 7, no. 12, pp. 1279–1292, 1993. View at Publisher · View at Google Scholar
  • Cailler, Schultz, Simpson, and Ouis, “Adhesion strength of copper thin-films to a E24 carbon steel: Effects of substrate surface ion bombardment etching,” Journal of Adhesion Science and Technology, vol. 7, no. 2, pp. 141–157, 1993. View at Publisher · View at Google Scholar
  • Argon, Jayachandran, and Boyce, “Mechanics of the indentation test and its use to assess the adhesion of polymeric coatings,” Journal of Adhesion Science and Technology, vol. 7, no. 8, pp. 813–836, 1993. View at Publisher · View at Google Scholar
  • Vijaya Puri, and Ravinder K. Puri, “Adhesion enhancement of thin film deposits by chopping,” Japanese Journal of Applied Physics, vol. 32, no. 10R, pp. 4699–4702, 1993. View at Publisher · View at Google Scholar
  • Severin, Johnson, de With, Hokke, and van der Wel, “The Adhesion of Electroless Ni(P) on Alumina Ceramic Using a Vacuum-Deposited Ti-Pd Activator Layer,” Journal of the Electrochemical Society, vol. 140, no. 6, pp. 1611–1616, 1993. View at Publisher · View at Google Scholar
  • A. Lahmar, and M. Cailler, “Adhesion studies of sputtered aluminium films on XC 70 steel substrates. Effect of the application of a bias voltage on the substrate during deposition,” Thin Solid Films, vol. 248, no. 2, pp. 204–211, 1994. View at Publisher · View at Google Scholar
  • Y. Leterrier, Y. Wyser, J. A. E. Månson, and J. Hilborn, “A Method to Measure the Adhesion of Thin Glass Coatings on Polymer Films,” The Journal of Adhesion, vol. 44, no. 3, pp. 213–227, 1994. View at Publisher · View at Google Scholar
  • D.M. de Leeuw, P.A. Kraakman, P.F.G. Bongaerts, C.M.J. Mutsaers, and D.B.M. Klaassen, “Electroplating of conductive polymers for the metallization of insulators,” Synthetic Metals, vol. 66, no. 3, pp. 263–273, 1994. View at Publisher · View at Google Scholar
  • A. Hagemeyer, H. Hibst, J. Heitz, and D. Bauerle, “Improvements of the peel test for adhesion evaluation of thin metallic films on polymeric substrates,” Journal of Adhesion Science and Technology, vol. 8, no. 1, pp. 29–40, 1994. View at Publisher · View at Google Scholar
  • G. Margaritis, S.A. Sikorski, and F.J. McGarry, “Elastic-plastic finite element method analysis and application of the island blister test,” Journal of Adhesion Science and Technology, vol. 8, no. 3, pp. 273–287, 1994. View at Publisher · View at Google Scholar
  • B. Ollivier, and A. Matthews, “Adhesion of diamond-like carbon films on polymers: an assessment of the validity of the scratch test technique applied to flexible substrates,” Journal of Adhesion Science and Technology, vol. 8, no. 6, pp. 651–662, 1994. View at Publisher · View at Google Scholar
  • Sherman D. Brown, “Adherence failure and measurement: Some troubling questions,” Journal of Adhesion Science and Technology, vol. 8, no. 6, pp. 687–711, 1994. View at Publisher · View at Google Scholar
  • George D. Vaughn, Bruce G. Frushour, and William C. Dale, “Scratch indentation, a simple adhesion test method for thin films on polymeric supports,” Journal of Adhesion Science and Technology, vol. 8, no. 6, pp. 635–650, 1994. View at Publisher · View at Google Scholar
  • Jayachandran, Boyce, and Argon, “Design of multilayer polymeric coatings for indentation resistance,” Journal of Computer-Aided Materials Design, vol. 2, no. 2, pp. 151–166, 1995. View at Publisher · View at Google Scholar
  • R. Bantle, and A. Matthews, “Investigation into the impact wear behaviour of ceramic coatings,” Surface and Coatings Technology, vol. 74-75, pp. 857–868, 1995. View at Publisher · View at Google Scholar
  • Yu N. Borisenko, V.T. Gritsyna, and T.V. Ivko, “The use of stimulated boundary gas release for determination of the adhesion of thin films by the blister test,” Journal of Adhesion Science and Technology, vol. 9, no. 11, pp. 1413–1426, 1995. View at Publisher · View at Google Scholar
  • Masao Murakawa, and Sadao Takeuchi, “Substrate treatments/modifications to improve the adhesion of diamond-coated cutting inserts,” Journal of Adhesion Science and Technology, vol. 9, no. 6, pp. 695–710, 1995. View at Publisher · View at Google Scholar
  • J. Narayan, R.D. Vispute, and K. Jagannadham, “Interfacial processing and adhesion of diamond, diamond-like, and TiN films on metallic and polymeric substrates,” Journal of Adhesion Science and Technology, vol. 9, no. 6, pp. 753–767, 1995. View at Publisher · View at Google Scholar
  • D Chicot, P Démarécaux, and J Lesage, “Apparent interface toughness of substrate and coating couples from indentation tests,” Thin Solid Films, vol. 283, no. 1-2, pp. 151–157, 1996. View at Publisher · View at Google Scholar
  • Tetsuya Hosaka, “Adhesion fracture of a two-layer Au evaporated film with C, W and Cr mixed,” Thin Solid Films, vol. 281-282, pp. 360–363, 1996. View at Publisher · View at Google Scholar
  • Olga A. Goussev, Karel Zeman, and Ulrich W. Suter, “Local Bending Moment as a Measure of Adhesion: The Blister Test,” The Journal of Adhesion, vol. 56, no. 1-4, pp. 45–57, 1996. View at Publisher · View at Google Scholar
  • S. Milis, and J.P. Celis, “Investigation of the properties of multilayers using a mechanical microprobe,” Thin Solid Films, vol. 288, no. 1-2, pp. 202–211, 1996. View at Publisher · View at Google Scholar
  • Y. Pitton, S.D. Hamm, F.-R. Lang, H.J. Mathieu, Y. Leterrier, and J.-A.E. Manson, “Adhesion study of SiOx / PET films: comparison between scratch test and fragmentation test,” Journal of Adhesion Science and Technology, vol. 10, no. 10, pp. 1047–1065, 1996. View at Publisher · View at Google Scholar
  • P.V. Patil, U.V. Nerle, V. Puri, and R.K. Puri, “Adhesion improvement and intrinsic stress decrease in cerium oxide thin films by chopping,” Journal of Adhesion Science and Technology, vol. 10, no. 2, pp. 151–159, 1996. View at Publisher · View at Google Scholar
  • Chicot, Démarécaux, and Lesage, “Mesure de la ténacité apparente d'interface par l'essai d'indentation interfaciale,” Revue de Metallurgie. Cahiers D'Informations Techniques, vol. 93, no. 2, pp. 245–254, 1996. View at Publisher · View at Google Scholar
  • Mark J. Filiaggi, Robert M. Pilliar, and David Abdulla, “Evaluating sol-gel ceramic thin films for metal implant applications. II. Adhesion and fatigue properties of zirconia films on Ti-6Al-4V,” Journal of Biomedical Materials Research, vol. 33, no. 4, pp. 239–256, 1996. View at Publisher · View at Google Scholar
  • Peter Weiss, and Markus W. Sigrist, “Measurements Of Coating Adhesion Strengths By Time-Resolved Interferometric Monitoring Of Laser-Induced Spallation,” Nondestructive Testing and Evaluation, vol. 13, no. 5, pp. 247–291, 1997. View at Publisher · View at Google Scholar
  • S. Parthasarathi, B.R. Tittmann, and R.J. Ianno, “Quantitative acoustic microscopy for characterization of the interface strength of diamond-like carbon thin films,” Thin Solid Films, vol. 300, no. 1-2, pp. 42–50, 1997. View at Publisher · View at Google Scholar
  • N.R. Moody, D. Medlin, D. Boehme, and D.P. Norwood, “Film thickness effects on the fracture of tantalum nitride on aluminum nitride thin film systems,” Engineering Fracture Mechanics, vol. 61, no. 1, pp. 107–118, 1998. View at Publisher · View at Google Scholar
  • D.L. Callahan, H. Yang, F.R. Brotzen, A.J. Griffin, and C.F. Dunn, “Electrostatic adhesion testing of thin metallizations,” IEEE Electron Device Letters, vol. 19, no. 3, pp. 65–67, 1998. View at Publisher · View at Google Scholar
  • G. Gioia, and M. Ortiz, “Determination of thin-film debonding parameters from telephone-cord measurements,” Acta Materialia, vol. 46, no. 1, pp. 169–175, 1998. View at Publisher · View at Google Scholar
  • N.R. Mody, R.Q. Hwang, S. Venka-taraman, J.E. Angelo, D.P. Norwood, and W.W. Gerberich, “Adhesion and fracture of tantalum nitride films,” Acta Materialia, vol. 46, no. 2, pp. 585–597, 1998. View at Publisher · View at Google Scholar
  • Jeung-Hyun Jeong, and Dongil Kwon, “Evaluation of the adhesion strength in DLC film-coated systems using the film-cracking technique,” Journal of Adhesion Science and Technology, vol. 12, no. 1, pp. 29–46, 1998. View at Publisher · View at Google Scholar
  • E. Pisanova, V. Dutschk, and B. Lauke, “Work of adhesion and local bond strength in glass fibre-thermoplastic polymer systems,” Journal of Adhesion Science and Technology, vol. 12, no. 3, pp. 305–322, 1998. View at Publisher · View at Google Scholar
  • G. Tas, J. J. Loomis, H. J. Maris, A. A. Bailes, and L. E. Seiberling, “Picosecond ultrasonics study of the modification of interfacial bonding by ion implantation,” Applied Physics Letters, vol. 72, no. 18, pp. 2235, 1998. View at Publisher · View at Google Scholar
  • Q.Hua Fan, A. Fernandes, E. Pereira, and J. Grácio, “Adhesion of diamond coatings on steel and copper with a titanium interlayer,” Diamond and Related Materials, vol. 8, no. 8-9, pp. 1549–1554, 1999. View at Publisher · View at Google Scholar
  • Y. Leterrier, P. Sutter, and J. A. E. Månson, “Thermodynamic and Micromechanical Approaches to the Adhesion between Polyethylene Terephthalate and Silicon Oxide,” The Journal of Adhesion, vol. 69, no. 1-2, pp. 13–30, 1999. View at Publisher · View at Google Scholar
  • H.K. Pulker, “Glass and Thin Films,” Coatings on Glass, pp. 73–102, 1999. View at Publisher · View at Google Scholar
  • A. Polyakova, A. Hiltner, E. Baer, and T. Provder, “Effect of formulation variables on coating properties and performance in the deep draw process,” Journal of Coatings Technology, vol. 72, no. 2, pp. 69–75, 2000. View at Publisher · View at Google Scholar
  • M.H. Blees, G.B. Winkelman, A.R. Balkenende, and J.M.J. den Toonder, “The effect of friction on scratch adhesion testing: application to a sol–gel coating on polypropylene,” Thin Solid Films, vol. 359, no. 1, pp. 1–13, 2000. View at Publisher · View at Google Scholar
  • Jang-hi Im, Edward O. Shaffer, Theodore Stokich, Andrew Strandjord, Jack Hetzner, James Curphy, Cheryl Karas, Greg Meyers, David Hawn, Ashok Chakrabarti, and Steve Froelicher, “On the Mechanical Reliability of Photo-BCB-Based Thin Film Dielectric Polymer for Electronic Packaging Applications,” Journal of Electronic Packaging, vol. 122, no. 1, pp. 28, 2000. View at Publisher · View at Google Scholar
  • Kaustubh S. Gadre, and T. L. Alford, “Thermal stability and adhesion improvement of Ag deposited on Pa-n by oxygen plasma treatment,” Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures, vol. 18, no. 6, pp. 2814, 2000. View at Publisher · View at Google Scholar
  • Kohl, Singer, and Griffith, “Evaluating the durability of silicone duplex coatings using a scratch tester,” Rubber Chemistry and Technology, vol. 73, no. 4, pp. 607–618, 2000. View at Publisher · View at Google Scholar
  • E. Auroux, M. Boustie, J.P. Romain, D. Bertheau, P. Peyre, L. Berthe, and E. Bartnicki, “Debonding study of Ni-base substrate/Pt coatings interfaces using laser shock waves: characterization of the targets and experimental study,” Surface and Coatings Technology, vol. 138, no. 2-3, pp. 269–277, 2001. View at Publisher · View at Google Scholar
  • J. Ge, R. Tuominen, and J. K. Kivilahti, “Adhesion of electrolessly-deposited copper to photosensitive epoxy,” Journal of Adhesion Science and Technology, vol. 15, no. 10, pp. 1133–1143, 2001. View at Publisher · View at Google Scholar
  • Victoria Dutschk, Edith Mäder, and Victor Rudoy, “Determination of polarity parameters for glass fibres by inverse gas chromatography: Some results and remarks,” Journal of Adhesion Science and Technology, vol. 15, no. 11, pp. 1373–1389, 2001. View at Publisher · View at Google Scholar
  • Myśliński, Kamasa, and Wsik, “Application of temperature modulated relative dilatometry. Temperatures of adhesion degradation,” Journal of Thermal Analysis and Calorimetry, vol. 65, no. 2, pp. 553–559, 2001. View at Publisher · View at Google Scholar
  • B. G. Yacobi, S. Martin, K. Davis, A. Hudson, and M. Hubert, “Adhesive bonding in microelectronics and photonics,” Journal of Applied Physics, vol. 91, no. 10, pp. 6227, 2002. View at Publisher · View at Google Scholar
  • Jong-jin Kim, Jeung-hyun Jeong, Kwang-Ryeol Lee, and Dongil Kwon, “A new indentation cracking method for evaluating interfacial adhesion energy of hard films,” Thin Solid Films, vol. 441, no. 1-2, pp. 172–179, 2003. View at Publisher · View at Google Scholar
  • Yves Leterrier, “Durability of nanosized oxygen-barrier coatings on polymers,” Progress in Materials Science, vol. 48, no. 1, pp. 1–55, 2003. View at Publisher · View at Google Scholar
  • A.A. Volinsky, D.F. Bahr, M.D. Kriese, N.R. Moody, and W. Gerberich, “Nanoindentation Methods in Interfacial Fracture Testing,” Comprehensive Structural Integrity, pp. 453–493, 2003. View at Publisher · View at Google Scholar
  • Muppidi, Moody, Bahr, and Cordill, “Effects of microstructure on the mechanical properties of copper films for high aspect ratio structures,” Microsystem Technologies, vol. 10, no. 6-7, pp. 451–455, 2004. View at Publisher · View at Google Scholar
  • M. Gillet, G. Mikaelian, A. Assaban, and E. Gillet, “Stresses and adhesion of thin metallic coatings on oxide substrates,” Journal of Adhesion Science and Technology, vol. 19, no. 9, pp. 753–763, 2005. View at Publisher · View at Google Scholar
  • Sameer I. Madanshetty, Kevin M. Wanklyn, and Hang Ji, “Testing thin film adhesion strength acoustically,” Acoustics Research Letters Online, vol. 6, no. 1, pp. 58, 2005. View at Publisher · View at Google Scholar
  • A. Polyakova, E. V. Stepanov, T. Provder, A. Hiltner, and E. Baer, “Relationship of Coating Failure to Deformation in the Deep Drawn Cup,” The Journal of Adhesion, vol. 72, no. 1, pp. 37–50, 2006. View at Publisher · View at Google Scholar
  • S.J. Bull, and E.G. Berasetegui, “An overview of the potential of quantitative coating adhesion measurement by scratch testing,” Tribology International, vol. 39, no. 2, pp. 99–114, 2006. View at Publisher · View at Google Scholar
  • M. Arrigoni, S. Barradas, M. Braccini, M. Dupeux, M. Jeandin, M. Boustie, C. Bolis, and L. Berthe, “A comparative study of three adhesion tests (EN 582, similar to ASTM C633, LASAT (LASer Adhesion Test), and bulge and blister test) performed on plasma sprayed copper deposited on aluminium 2017 substrates,” Journal of Adhesion Science and Technology, vol. 20, no. 5, pp. 471–487, 2006. View at Publisher · View at Google Scholar
  • S.J. Bull, and E. G.-Berasetegui, “Chapter 7 An overview of the potential of quantitative coating adhesion measurement by scratch testing,” Scratching of Materials and Application, vol. 51, pp. 136–165, 2006. View at Publisher · View at Google Scholar
  • Shoji Kamiya, Shigeori Suzuki, Kiichiro Yamanobe, and Masumi Saka, “Quantitative evaluation of bonding energy for the interfaces in Cu metallization systems,” Journal of Applied Physics, vol. 99, no. 3, pp. 034503, 2006. View at Publisher · View at Google Scholar
  • Yingkai Liu, Qi Gan, Shermeen Baig, and Elisabeth Smela, “Improving PPy Adhesion by Surface Roughening,” The Journal of Physical Chemistry C, vol. 111, no. 30, pp. 11329–11338, 2007. View at Publisher · View at Google Scholar
  • Kurt V. Wolf, Zong Zong, Juan Meng, Argjenta Orana, Nima Rahbar, Karin M. Balss, George Papandreou, Cynthia A. Maryanoff, and Wole Soboyejo, “An investigation of adhesion in drug-eluting stent layers,” Journal of Biomedical Materials Research Part A, vol. 87A, no. 1, pp. 272–281, 2008. View at Publisher · View at Google Scholar
  • C. Gheorghies, and M. Thompson, “Characteristics of Acoustic Emission Signal Specific to Isolated Cracks Triggered by Scratch Tests in Stainless Steel Coatings,” Journal of Adhesion Science and Technology, vol. 22, no. 16, pp. 2003–2011, 2008. View at Publisher · View at Google Scholar
  • Robert Lacombe, “General Adhesion Measurement References,” Adhesion Measurement Methods, pp. 399–428, 2009. View at Publisher · View at Google Scholar
  • Noboru Kyouno, Daisuke Arai, Kyo Takeshita, and Shigeru Baba, “Application of FFT-Based Signal Analysis to Micro-Scratch Testing for Adhesion Strength Measurement of Thin Films and Measured Results Based on Different Measurement Parameters,” Journal of Adhesion Science and Technology, vol. 23, no. 16, pp. 1973–1991, 2009. View at Publisher · View at Google Scholar
  • Chunbo (Sam) Zhang, Andrew Deceuster, and Leijun Li, “A Method for Bond Strength Evaluation for Laminated Structures with Application to Ultrasonic Consolidation,” Journal of Materials Engineering and Performance, vol. 18, no. 8, pp. 1124–1132, 2009. View at Publisher · View at Google Scholar
  • Rajesh Kitey, Philippe H. Geubelle, and Nancy R. Sottos, “Mixed-mode interfacial adhesive strength of a thin film on an anisotropic substrate,” Journal of the Mechanics and Physics of Solids, vol. 57, no. 1, pp. 51–66, 2009. View at Publisher · View at Google Scholar
  • T. Tong, B. Babatope, S. Admassie, J. Meng, O. Akwogu, W. Akande, and W. O. Soboyejo, “Adhesion in organic electronic structures,” Journal of Applied Physics, vol. 106, no. 8, pp. 083708, 2009. View at Publisher · View at Google Scholar
  • Y. Yang, R. Labie, F. Ling, C. Zhao, A. Radisic, J. Van Olmen, Y. Travaly, B. Verlinden, and I. De Wolf, “Processing assessment and adhesion evaluation of copper through-silicon vias (TSVs) for three-dimensional stacked-integrated circuit (3D-SIC) architectures,” Microelectronics Reliability, vol. 50, no. 9-11, pp. 1636–1640, 2010. View at Publisher · View at Google Scholar
  • Rishi Sharma, Alok Kr. Pandey, Neelima Sharma, D. Sasmal, and P.K. Barhai, “Diamond like carbon films as a protective surface on PMMA for biomedical applications,” Surface and Coatings Technology, vol. 205, no. 7, pp. 2495–2502, 2010. View at Publisher · View at Google Scholar
  • Jinju Chen, and S J Bull, “Approaches to investigate delamination and interfacial toughness in coated systems: an overview,” Journal of Physics D: Applied Physics, vol. 44, no. 3, pp. 034001, 2010. View at Publisher · View at Google Scholar
  • Christos F. Karanikas, Han Li, Joost J. Vlassak, and James J. Watkins, “Quantitative Interfacial Energy Measurements of Adhesion-Promoted Thin Copper Films by Supercritical Fluid Deposition on Barrier Layers,” Journal of Engineering Materials and Technology, vol. 132, no. 2, pp. 021014, 2010. View at Publisher · View at Google Scholar
  • Donald M. Mattox, “Non-Elemental Characterization of Films and Coatings,” Handbook of Deposition Technologies for Films and Coatings, pp. 716–748, 2010. View at Publisher · View at Google Scholar
  • R. Vert, D. Chicot, X. Decoopman, I.C. Gruescu, E. Meillot, A. Vardelle, and G. Mariaux, “Adhesive and cohesive properties of nanostructured Zr02 coatings by the original Vickers Indentation Cracking technique,” Thin Solid Films, vol. 519, no. 22, pp. 7789–7795, 2011. View at Publisher · View at Google Scholar
  • F. Ahmed, K. Bayerlein, S.M. Rosiwal, M. Göken, and K. Durst, “Stress evolution and cracking of crystalline diamond thin films on ductile titanium substrate: Analysis by micro-Raman spectroscopy and analytical modelling,” Acta Materialia, vol. 59, no. 14, pp. 5422–5433, 2011. View at Publisher · View at Google Scholar
  • Chang-Ji Hu, Fang-Yan Xie, Chun-Shan He, and Zhen-Hui He, “Interfacial interaction between ZnO thin film and polyimide substrate investigated by XPS and DFT calculation,” Surface and Interface Analysis, vol. 44, no. 3, pp. 308–317, 2011. View at Publisher · View at Google Scholar
  • N. R. Moody, D. P. Adams, M. J. Cordill, N. Yang, and D. F. Bahr, “The Effects of Copper on the Interfacial Failure of Gold Films,” MRS Proceedings, vol. 695, 2011. View at Publisher · View at Google Scholar
  • Wolfgang Sachse, Kwang Yul Kim, and H. D. Conway, “Determination of the Bond Strength of a Metal Coating on a Substrate,” MRS Proceedings, vol. 153, 2011. View at Publisher · View at Google Scholar
  • Wolfgang Sachse, Kwang Yul Kim, and H. D. Conway, “Determination of the Bond Strength of a Metal Coating on a Substrate,” MRS Proceedings, vol. 154, 2011. View at Publisher · View at Google Scholar
  • Stephen D. Senturia, Susan C. Noe, and Jeffrey Y. Pan, “Physical Characterization Of Microelectronic Polymeric Thin Films,” MRS Proceedings, vol. 227, 2011. View at Publisher · View at Google Scholar
  • Shankar K. Venkataraman, William W. Gerberich, and David L. Kohlstedt, “Adhesion in Metal-Ceramic Systems,” MRS Proceedings, vol. 308, 2011. View at Publisher · View at Google Scholar
  • Sriram Viswanathan, and David L. Kohlstedt, “Effect of Heat Treatment on Adhesion in the Cr/Al2O3 System,” MRS Proceedings, vol. 308, 2011. View at Publisher · View at Google Scholar
  • M. P. de Boer, H. Huang, J. C. Nelson, F. Wang, and W. W. Gerberich, “Adhesion of Tungsten Fine Lines on SiO2 by Micro-Wedge Scratching,” MRS Proceedings, vol. 318, 2011. View at Publisher · View at Google Scholar
  • N. R. Moody, S. Venkataraman, J. Nelson, W. Worobey, and W. W. Gerberich, “Interface Roughness Effects on Adhesion of Ta2N Films.,” MRS Proceedings, vol. 327, 2011. View at Publisher · View at Google Scholar
  • M. P. dE Boer, H. Huang, J. C. Nelson, E. T. Lilleodden, and W. W. Gerberich, “Cracking Mechanisms of Fine Lines by Microwedge Scratch Testing,” MRS Proceedings, vol. 338, 2011. View at Publisher · View at Google Scholar
  • Shankar K. Venkataraman, John C. Nelson, Neville R. Moody, David L. Kohlstedt, and William W. Gerberich, “Micro-Mechanical Characterization of Tantalum Nitride Thin Films on Sapphire Substrates,” MRS Proceedings, vol. 343, 2011. View at Publisher · View at Google Scholar
  • N. R. Moody, S. K. Venkataraman, J. C Nelson, W Worobey, and Andw. W. Gerberich, “The Effects of High Temperature Exposure on the Fracture of Thin Tantalum Nitride Films,” MRS Proceedings, vol. 343, 2011. View at Publisher · View at Google Scholar
  • N. R. Moody, S. K. Venkataraman, B. Bastasz, J. E. Angelo, and W. W. Gerberich, “Hydrogen Effects on the Fracture of Thin Tantalum Nitride Films,” MRS Proceedings, vol. 356, 2011. View at Publisher · View at Google Scholar
  • N. R. Moody, R. Q. Hwang, J. E. Angelo, S. Venkataraman, and W. W. Gerberich, “Residual Stress Effects on the Fracture of Tantalum Nitride Films,” MRS Proceedings, vol. 458, 2011. View at Publisher · View at Google Scholar
  • N. R. Moody, D. P. Adams, A. A. Volinsky, M. D. Kriese, and W. W. Gerberich, “Annealing Effects on Interfacial Fracture of Gold-Chromium Films in Hybrid Microcircuits,” MRS Proceedings, vol. 586, 2011. View at Publisher · View at Google Scholar
  • Deqiang Yin, Xianghe Peng, Yi Qin, Jiling Feng, and Zhongchang Wang, “Quantifying adhesion energy of mechanical coatings at atomistic scale,” Applied Surface Science, vol. 258, no. 4, pp. 1451–1455, 2011. View at Publisher · View at Google Scholar
  • N. R. Moody, A. Strojny, D. L. Medlin, A. Talin, and W. W. Gerberich, “Substrate composition effects on the interfacial fracture of tantalum nitride films,” Journal of Materials Research, vol. 14, no. 06, pp. 2306–2313, 2011. View at Publisher · View at Google Scholar
  • Shiqun Guo, and Zhen Yang, “Fundamental solutions of a normal force in semi-infinite coating materials Part I: Solution of force acting in the coating layer,” Advanced Materials Research, vol. 243-249, pp. 5917–5922, 2011. View at Publisher · View at Google Scholar
  • Anirban Sarkar, and Dooyoung Hah, “Electrophoretic Deposition of Carbon Nanotubes on Silicon Substrates,” Journal of Electronic Materials, vol. 41, no. 11, pp. 3130–3138, 2012. View at Publisher · View at Google Scholar
  • V. Sametoglu, V. Sauer, and Y. Y. Tsui, “Nanoscale laser-induced forward transfer through patterned Cr films,” Applied Physics A, vol. 110, no. 4, pp. 823–827, 2012. View at Publisher · View at Google Scholar
  • Lucas P. Tendela, and Guillermo H. Kaufmann, “Evaluation of coating adhesion using a radial speckle interferometer combined with a micro-indentation test,” Optics and Lasers in Engineering, vol. 50, no. 6, pp. 817–822, 2012. View at Publisher · View at Google Scholar
  • Juan Ordonez, Martin Schuettler, Christian Boehler, Tim Boretius, and Thomas Stieglitz, “Thin films and microelectrode arrays for neuroprosthetics,” MRS Bulletin, vol. 37, no. 06, pp. 590–598, 2012. View at Publisher · View at Google Scholar
  • M.C. Santos, M.L. Munford, and R.F. Bianchi, “Influence of NiCr/Au electrodes and multilayer thickness on the electrical properties of PANI/PVS ultrathin film grown by Lbl deposition,” Materials Science and Engineering: B, vol. 177, no. 4, pp. 359–366, 2012. View at Publisher · View at Google Scholar
  • Y. Zhang, D.W. Hazelton, A.R. Knoll, J.M. Duval, P. Brownsey, S. Repnoy, S. Soloveichik, A. Sundaram, R.B. McClure, G. Majkic, and V. Selvamanickam, “Adhesion strength study of IBAD–MOCVD-based 2G HTS wire using a peel test,” Physica C: Superconductivity, vol. 473, pp. 41–47, 2012. View at Publisher · View at Google Scholar
  • Lu, Yaseen, and Cowsillpp. 176–220, 2012. View at Publisher · View at Google Scholar
  • Marius Jesdinszki, Norbert Rodler, Valerio Cassio, Esra Kucukpinar, Horst-Christian Langowski, Carolin Struller, and David Blondin, “Evaluation of adhesion strength between thin aluminum layer and poly(ethylene terephthalate) substrate by peel tests - A practical approach for the packaging industry,” Journal of Adhesion Science and Technology, vol. 26, no. 20-21, pp. 2357–2380, 2012. View at Publisher · View at Google Scholar
  • Logothetidis, Kassavetis, and Zyganitidis, “Nanomechanical testing of the barrier thin film adhesion to a flexible polymer substrate,” Journal of Adhesion Science and Technology, vol. 26, no. 20-21, pp. 2393–2404, 2012. View at Publisher · View at Google Scholar
  • Jürg Germann, Michael Dommer, Ramon Pericet-Camara, and Dario Floreano, “Active connection mechanism for soft modular robots,” Advanced Robotics, vol. 26, no. 7, pp. 785–798, 2012. View at Publisher · View at Google Scholar
  • Mike Driver, M. Yaseen, B. J. Cowsill, and J. R. Lu, “Characterisation of biomedical coatings,” Coatings for biomedical applications, pp. 176–220, 2012. View at Publisher · View at Google Scholar
  • Algirdas Lazauskas, and Viktoras Grigaliunas, “Float glass surface preparation methods for improved chromium film adhesive bonding,” Medziagotyra, vol. 18, no. 2, pp. 181–186, 2012. View at Publisher · View at Google Scholar
  • Zhaoxiang Chen, Kun Zhou, Xuehong Lu, and Yee Cheong Lam, “A review on the mechanical methods for evaluating coating adhesion,” Acta Mechanica, 2013. View at Publisher · View at Google Scholar
  • Furqan Ahmed, Markus Krottenthaler, Christoph Schmid, and Karsten Durst, “Assessment of stress relaxation experiments on diamond coatings analyzed by digital image correlation and micro-Raman spectroscopy,” Surface and Coatings Technology, 2013. View at Publisher · View at Google Scholar
  • T. Abachi, L. Cattin, G. Louarn, Y. Lare, A. Bou, M. Makha, P. Torchio, M. Fleury, M. Morsli, M. Addou, and J.C. Bernède, “Highly flexible, conductive and transparent MoO3/Ag/MoO3 multilayer electrode for organic photovoltaic cells,” Thin Solid Films, 2013. View at Publisher · View at Google Scholar
  • J. Lesage, and D. Chicot, “Models for hardness and adhesion of coatings,” Surface Engineering, vol. 15, no. 6, pp. 447–453, 2013. View at Publisher · View at Google Scholar
  • J. Valli, U. Makela, and A. Matthews, “Assessment of Coating Adhesion,” Surface Engineering, vol. 2, no. 1, pp. 49–54, 2013. View at Publisher · View at Google Scholar
  • Abousoufiane Ouis, and Michel Cailler, “Effects of substrate bias voltage on adhesion of DC magnetron-sputtered copper films on E24 carbon steel: investigations by Auger electron spectroscopy,” Journal of Adhesion Science and Technology, pp. 1–20, 2013. View at Publisher · View at Google Scholar
  • Z.H. Liu, C.T. Pan, Y.C. Chen, and P.H. Liang, “Interfacial characteristics of polyethylene terephthalate-based piezoelectric multi-layer films,” Thin Solid Films, vol. 531, pp. 284–293, 2013. View at Publisher · View at Google Scholar
  • Oili M.E. Ylivaara, Xuwen Liu, Lauri Kilpi, Jussi Lyytinen, Dieter Schneider, Mikko Laitinen, Jaakko Julin, Saima Ali, Sakari Sintonen, Maria Berdova, Eero Haimi, Timo Sajavaara, Helena Ronkainen, Harri Lipsanen, Jari Koskinen, Simo-Pekka Hannula, and Riikka L. Puurunen, “Aluminum oxide from trimethylaluminum and water by atomic layer deposition: The temperature dependence of residual stress, elastic modulus, hardness and adhesion,” Thin Solid Films, 2013. View at Publisher · View at Google Scholar
  • L. Cattin, Y. Lare, M. Makha, M. Fleury, F. Chandezon, T. Abachi, M. Morsli, K. Napo, M. Addou, and J.C. Bernède, “Effect of the Ag deposition rate on the properties of conductive transparent MoO3/Ag/MoO3 multilayers,” Solar Energy Materials and Solar Cells, vol. 117, pp. 103–109, 2013. View at Publisher · View at Google Scholar
  • Wei-Sheng Lei, and Ajay Kumar, “Adhesion Measurement of Thin Films and Coatings: Relevance to Microelectronics.,” Adhesion in Microelectronics, pp. 33–63, 2014. View at Publisher · View at Google Scholar
  • Tanweer Ahsan, and Andrew Schoenberg, “Investigation of the Mechanisms of Adhesion and Failure in Microelectronic Packages,” Adhesion in Microelectronics, pp. 313–341, 2014. View at Publisher · View at Google Scholar
  • Chongyang Nie, Dezhi Zheng, Le Gu, Xiaoli Zhao, and Liqin Wang, “Comparison of interface mechanics characteristics of DLC coating deposited on bearing steel and ceramics,” Applied Surface Science, 2014. View at Publisher · View at Google Scholar
  • J. Lyytinen, M. Berdova, P. Hirvonen, X. W. Liu, S. Franssila, Q. Zhou, and J. Koskinen, “ Interfacial mechanical testing of atomic layer deposited TiO 2 and Al 2 O 3 on a silicon substrate by the use of embedded SiO 2 microspheres ,” RSC Advances, vol. 4, no. 70, pp. 37320, 2014. View at Publisher · View at Google Scholar
  • Qiang Ma, Xuejie Zhu, Doudou Zhang, and Shengzhong (Frank) Liu, “Graphene oxide – a surprisingly good nucleation seed and adhesion promotion agent for one-step ZnO lithography and optoelectronic applications,” J. Mater. Chem. C, vol. 2, no. 42, pp. 8956–8961, 2014. View at Publisher · View at Google Scholar
  • Jungkyu Lee, Kyriaki Polychronopoulou, Andrew N. Cloud, John R. Abelson, and Andreas A. Polycarpou, “Shear strength measurements of hafnium diboride thin solid films,” Wear, 2014. View at Publisher · View at Google Scholar
  • Irina Starostina, and Rustam Deberdeev, “Bibliography,” Polymer Surfaces and Interfaces, pp. 173–175, 2014. View at Publisher · View at Google Scholar
  • Junyi Sun, Yongsheng Lian, Zhengliang Li, Xiaoting He, and Zhoulian Zheng, “Theoretical study on shaft-loaded blister test technique: Synchronous characterization of surface and interfacial mechanical properties,” International Journal of Adhesion and Adhesives, 2014. View at Publisher · View at Google Scholar
  • Liqun Du, Zhong Zhao, and Zhicheng Tan, “Influence of electrodeposited crystallite size on interfacial adhesion strength of electroformed layers,” Micro & Nano Letters, vol. 9, no. 2, pp. 73–76, 2014. View at Publisher · View at Google Scholar
  • Sungwon Lee, Yusuke Inoue, Dongmin Kim, Amir Reuveny, Kazunori Kuribara, Tomoyuki Yokota, Jonathan Reeder, Masaki Sekino, Tsuyoshi Sekitani, Yusuke Abe, and Takao Someya, “A strain-absorbing design for tissue–machine interfaces using a tunable adhesive gel,” Nature Communications, vol. 5, pp. 5898, 2014. View at Publisher · View at Google Scholar
  • Konrad Kiełbasiński, Jakub Krzemiński, Anna Młożniak, Elżbieta Zwierkowska, Olgierd Jeremiasz, Małgorzata Jakubowska, Jerzy Szałapak, and Radosław Pawłowski, “New technology of silvering aluminium busbar joints with the use of printable paste containing nano-size Ag particles,” Journal of Materials Science: Materials in Electronics, 2014. View at Publisher · View at Google Scholar
  • P Myśliński, P Kamasa, and A Gilewicz, “Temperature modulation in dilatometric investigation of PVD substrate-coating systems,” Journal of Physics: Conference Series, vol. 564, pp. 012005, 2014. View at Publisher · View at Google Scholar
  • D. M. Goldie, A. C. Hourd, M. R. Harvie, J. Thomson, and A. Abdolvand, “Scatter-limited conduction in printed platinum nanofilms,” Journal of Materials Science, 2014. View at Publisher · View at Google Scholar
  • Y. Mouchaal, G. Louarn, A. Khelil, M. Morsli, N. Stephant, A. Bou, T. Abachi, L. Cattin, M. Makha, P. Torchio, and J.C. Bernède, “Broadening of the transmission range of dielectric/metal multilayer structures by using different metals,” Vacuum, 2014. View at Publisher · View at Google Scholar
  • Zhiqin Zheng, Facheng Yi, Yong Zhang, Chen Chen, and Xiaozhen Song, “Surface metallization of alumina ceramics: Effects of sintering time and substrate etching,” Ceramics International, vol. 40, no. 8, pp. 12709–12715, 2014. View at Publisher · View at Google Scholar
  • Muhammad Shahid, Asif Ali Tahir, Muhammad Khawar Rauf, James Raftery, and Muhammad Mazhar, “Temperature-controlled deposition of copper(I) oxide and metallic copper nanostructures from single-source molecular precursor,” Australian Journal of Chemistry, vol. 67, no. 5, pp. 757–762, 2014. View at Publisher · View at Google Scholar
  • Shiryaev, Mishinov, and Churbanov, “Adhesion of glassy arsenic sulfide to quartz glass,” Inorganic Materials, vol. 50, no. 11, pp. 1157–1161, 2014. View at Publisher · View at Google Scholar
  • Jussi Lyytinen, Maria Berdova, Sami Franssila, and Jari Koskinen, “Adhesion testing of atomic layer deposited TiO2 on glass substrate by the use of embedded SiO2 microspheres,” Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films, vol. 32, no. 1, pp. 01A102, 2014. View at Publisher · View at Google Scholar
  • Sea-Fue Wang, Hsiao-Ching Yang, Chien-Fong Liu, and Huy-Yun Y. Bor, “Characteristics of Bilayer Molybdenum Films Deposited Using RF Sputtering for Back Contact of Thin Film Solar Cells,” Advances in Materials Science and Engineering, vol. 2014, pp. 1–6, 2014. View at Publisher · View at Google Scholar
  • Ming Liu, and Fuqian Yang, “Indentation-induced interface decohesion between a piezoelectric film and an elastic substrate,” Journal of Computational and Theoretical Nanoscience, vol. 11, no. 8, pp. 1863–1873, 2014. View at Publisher · View at Google Scholar
  • Jussi Lyytinen, Xuwen Liu, Oili M.E. Ylivaara, Sakari Sintonen, Ajai Iyer, Saima Ali, Jaakko Julin, Harri Lipsanen, Timo Sajavaara, Riikka L. Puurunen, and Jari Koskinen, “Nanotribological, nanomechanical and interfacial characterization of Atomic Layer Deposited TiO2 on a silicon substrate,” Wear, 2015. View at Publisher · View at Google Scholar
  • Zhong Zhao, Liqun Du, Zheng Xu, and Ligeng Shao, “Effects of ultrasonic agitation on adhesion strength of micro electroforming Ni layer on Cu substrate,” Ultrasonics Sonochemistry, 2015. View at Publisher · View at Google Scholar
  • Liqun du, Xiaolei Zhang, Ming Zhao, and Chang Song, “Investigation in the interface adhesion strength between SU-8 photoresist and metal substrate by ultrasonic treatment,” Microsystem Technologies, 2015. View at Publisher · View at Google Scholar
  • Kun Zhou, Zhaoxiang Chen, and Hsin Hoh, “Characterization of Coating Adhesion Strength,” Thin Films and Coatings, pp. 465–528, 2015. View at Publisher · View at Google Scholar
  • Liqun Du, Zhicheng Tan, Chang Song, Zhong Zhao, Penghe Yin, and Qingfeng Li, “Study on internal stress in micro-electroformed layer,” Key Engineering Materials, vol. 645, pp. 178–183, 2015. View at Publisher · View at Google Scholar
  • Carlos Sotelo-Vazquez, Nuruzzaman Noor, Andreas Kafizas, Raul Quesada-Cabrera, David O. Scanlon, Alaric Taylor, James R. Durrant, and Ivan P. Parkin, “Multifunctional P-doped TiO2 Films: A New Approach to Self-Cleaning, Transparent Conducting Oxide Materials.,” Chemistry of Materials, pp. 150422124418001, 2015. View at Publisher · View at Google Scholar
  • Milda Malakauskaite-Petruleviciene, Zivile Stankeviciute, Gediminas Niaura, Aleksandra Prichodko, and Aivaras Kareiva, “Synthesis and characterization of sol-gel derived calcium hydroxyapatite thin films spin-coated on silicon substrate,” Ceramics International, 2015. View at Publisher · View at Google Scholar
  • Nara Kim, Hongkyu Kang, Jong-Hoon Lee, Seyoung Kee, Seoung Ho Lee, and Kwanghee Lee, “Highly Conductive All-Plastic Electrodes Fabricated Using a Novel Chemically Controlled Transfer-Printing Method,” Advanced Materials, 2015. View at Publisher · View at Google Scholar
  • V. Soare, M. Burada, I. Constantin, M. Ghita, V. Constantin, F. Miculescu, and A. M. Popescu, “Synthesis and performance of Zn–Ni–P thin films,” Chinese Physics B, vol. 24, no. 3, pp. 036101, 2015. View at Publisher · View at Google Scholar
  • K. D. Harris, A. L. Elias, and H.-J. Chung, “Flexible electronics under strain: a review of mechanical characterization and durability enhancement strategies,” Journal of Materials Science, 2015. View at Publisher · View at Google Scholar
  • Bradley Sherman, Hong-Cin Liou, and Oluwaseyi Balogun, “Thin film interface stresses produced by high amplitude laser generated surface acoustic waves,” Journal of Applied Physics, vol. 118, no. 13, pp. 135303, 2015. View at Publisher · View at Google Scholar
  • V. S. Shiryaev, S. V. Mishinov, and M. F. Churbanov, “Investigation of adhesion of chalcogenide glasses to silica glass,” Journal Of Non-Crystalline Solids, vol. 408, pp. 71–75, 2015. View at Publisher · View at Google Scholar
  • S. Karthikeyan, and L. Vijayaraghavan, “Investigation of the surface properties of heat treated electroless Ni–P coating,” Transactions of the IMF, vol. 94, no. 5, pp. 265–273, 2016. View at Publisher · View at Google Scholar
  • Abdullah G. Al-Sehemi, Mohammad S. Al-Assiri, Abul Kalam, Qayyum Zafar, Mohamad Izzat Azmer, Khaulah Sulaiman, and Zubair Ahmad, “Sensing performance optimization by tuning surface morphology of organic (D-pi-A) dye based humidity sensor,” Sensors And Actuators B-Chemical, vol. 231, pp. 30–37, 2016. View at Publisher · View at Google Scholar
  • Wei&xSheng Lei, Kash Mittal, and Ajay Kumar, “Adhesion Measurement of Thin Films and Coatings: Relevance to Biomedical Applications,” Medical Coatings and Deposition Technologies, pp. 631–670, 2016. View at Publisher · View at Google Scholar
  • Yun-Fei Ding, Rachel W. Li, Masaaki Nakai, Trina Majumdar, Mitsuo Niinomi, Nick Birbilis, Paul N. Smith, Dong-Hai Zhang, and Xiao-Bo Chen, “Osteoanabolic Implant Materials for Orthopedic Treatment,” Advanced Healthcare Materials, vol. 5, no. 14, pp. 1740–1752, 2016. View at Publisher · View at Google Scholar
  • Qayyum Zafar, Mohamad Izzat Azmer, Abdullah G. Al-Sehemi, Mohammad S. Al-Assiri, Abul Kalam, and Khaulah Sulaiman, “Evaluation of humidity sensing properties of TMBHPET thin film embedded with spinel cobalt ferrite nanoparticles,” Journal of Nanoparticle Research, vol. 18, no. 7, 2016. View at Publisher · View at Google Scholar
  • Brethous, Nassiet, Tramis, Hassoune-Rhabbour, and Fazzini, “Experimental investigation on the effect of nanostructuration on the adherence properties of epoxy adhesives by a probe tack test,” International Journal of Adhesion and Adhesives, vol. 67, pp. 22–30, 2016. View at Publisher · View at Google Scholar
  • L. Qiu, X. Zhu, G. He, and K. Xu, “The repeated spherical indentation test: an efficient way to evaluate the adhesion of hard coatings,” Surface Engineering, vol. 32, no. 8, pp. 578–584, 2016. View at Publisher · View at Google Scholar
  • S. V. Mishinov, M. F. Churbanov, A. N. Gorokhov, D. A. Kazakov, V. S. Shiryaev, A. I. Suchkov, L. A. Igumnov, and G. E. Snopatin, “Adhesion mechanism of destruction of silica-glass surface during the preparation and treatment of optical glassy arsenic Chalcogenides,” Inorganic Materials, vol. 52, no. 7, pp. 716–720, 2016. View at Publisher · View at Google Scholar
  • Meirowitzpp. 159–177, 2016. View at Publisher · View at Google Scholar
  • Xiao-Hua He, Hui-Ji Shi, and Mark Norfolk, “Influence of process parameters on bond properties of Al laminated structure produced by ultrasonic consolidation,” Rapid Prototyping Journal, vol. 22, no. 2, pp. 435–442, 2016. View at Publisher · View at Google Scholar
  • Lahmar, Durand, Jouanneau, Thouand, Garnier, and Assaf, “Factors influencing adhesion of submicrometer thin metal films: A critical review,” Reviews of Adhesion and Adhesives, vol. 4, no. 1, pp. 47–68, 2016. View at Publisher · View at Google Scholar
  • Andreas Kleinbichler, Mattias Bartosik, Bernhard Völker, and Megan J. Cordill, “Thin Film Adhesion of Flexible Electronics Influenced by Interlayers ,” Advanced Engineering Materials, 2016. View at Publisher · View at Google Scholar
  • M. Hssein, S. Tuo, S. Benayoun, L. Cattin, M. Morsli, Y. Mouchaal, M. Addou, A. Khelil, and J.C. Bernède, “Cu-Ag bi-layer films in dielectric/metal/dielectric transparent electrodes as ITO free electrode in organic photovoltaic devices,” Organic Electronics, 2016. View at Publisher · View at Google Scholar
  • Long Li, and Dejing Zhou, “Quantitative evaluation on interface bonding of layered materials with thin cladding layer,” Materials China, vol. 35, no. 11, pp. 863–871, 2016. View at Publisher · View at Google Scholar
  • Rosa Elena Ramírez-García, Sergio Alfonso Pérez-García, Liliana Licea-Jiménez, Jesús Alberto González-Rodríguez, and Miguel Arroyo-Ortega, “ Engineered TiO 2 and SiO 2 -TiO 2 Films on Silica Coated Glass for Increased Thin Film Durability Under Abrasive Conditions ,” International Journal of Applied Ceramic Technology, 2016. View at Publisher · View at Google Scholar
  • Barbara Putz, Bernhard Völker, Christopher Semprimoschnig, and Megan J. Cordill, “Influence of extreme thermal cycling on metal-polymer interfaces,” Microelectronic Engineering, 2016. View at Publisher · View at Google Scholar
  • Daisuke Yamane, Toshifumi Konishi, Teruaki Safu, Hiroshi Toshiyoshi, Masato Sone, Kazuya Masu, and Katsuyuki Machida, “Evaluation and modeling of adhesion layer in shock-protection structure for MEMS accelerometer,” Microelectronics Reliability, 2016. View at Publisher · View at Google Scholar
  • Lauri Kilpi, Oili M. E. Ylivaara, Antti Vaajoki, Jari Malm, Sakari Sintonen, Marko Tuominen, Riikka L. Puurunen, and Helena Ronkainen, “Microscratch testing method for systematic evaluation of the adhesion of atomic layer deposited thin films on silicon,” Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films, vol. 34, no. 1, pp. 01A124, 2016. View at Publisher · View at Google Scholar
  • Wei-Sheng Lei, Kash Mittal, and Zhishui Yu, “Adhesion measurement of coatings on biodevices/implants: A critical review,” Reviews of Adhesion and Adhesives, vol. 4, no. 4, pp. 367–396, 2016. View at Publisher · View at Google Scholar
  • Moustapha E. Moustapha, Jörg F. Friedrich, Zeinab R. Farag, Simone Krüger, Gundula Hidde, and Maged M. Azzam, “Promotion of adhesion of green flame retardant coatings onto polyolefins by depositing ultra-thin plasma polymer films: A critical review,” Reviews of Adhesion and Adhesives, vol. 4, no. 4, pp. 417–447, 2016. View at Publisher · View at Google Scholar
  • Mohamad Izzat Azmer, Qayyum Zafar, Zubair Ahmad, and Khaulah Sulaiman, “Humidity sensor based on electrospun MEH-PPV:PVP microstructured composite,” Rsc Advances, vol. 6, no. 42, pp. 35387–35393, 2016. View at Publisher · View at Google Scholar
  • Sapna D. Ponja, Ivan P. Parkin, and Claire J. Carmalt, “Synthesis and material characterization of amorphous and crystalline (α-) Al2O3: Via aerosol assisted chemical vapour deposition,” RSC Advances, vol. 6, no. 105, pp. 102956–102960, 2016. View at Publisher · View at Google Scholar
  • T. A. Nirmal Peiris, S. Ghanizadeh, D. S. Y. Jayathilake, D. A. Hutt, K. G. U. Wijayantha, P. P. Conway, D. J. Southee, I. P. Parkin, P. Marchand, J. A. Darr, and C. J. Carmalt, “Aerosol-assisted fabrication of tin-doped indium oxide ceramic thin films from nanoparticle suspensions,” J. Mater. Chem. C, 2016. View at Publisher · View at Google Scholar
  • Pierre-Emmanuel Mazeran, Marie-Florence Arvieu, Maxence Bigerelle, and Stéphane Delalande, “Torsion delamination test, a new method to quantify the adhesion of coating: Application to car coatings,” Progress in Organic Coatings, vol. 110, pp. 134–139, 2017. View at Publisher · View at Google Scholar
  • Ayşenur Keleş, Hikmet Çiçek, Özlem Baran, Yaşar Totik, and İhsan Efeoğlu, “Determining The Critical Loads of V and Nb Doped Ternary TiN-based Coatings Deposited Using CFUBMS on Steels,” Surface and Coatings Technology, 2017. View at Publisher · View at Google Scholar
  • Iman A. Hassan, Sanjayan Sathasivam, Sean P. Nair, and Claire J. Carmalt, “Antimicrobial Properties of Copper-Doped ZnO Coatings under Darkness and White Light Illumination,” ACS Omega, vol. 2, no. 8, pp. 4556–4562, 2017. View at Publisher · View at Google Scholar
  • A. Kleinbichler, M. J. Pfeifenberger, J. Zechner, N. R. Moody, D. F. Bahr, and M. J. Cordill, “New Insights into Nanoindentation-Based Adhesion Testing,” Jom, 2017. View at Publisher · View at Google Scholar
  • Wei-Sheng Lei, Kash Mittal, and Zhishui Yu, “Adhesion Measurement of Coatings on Biodevices/Implants,” Progress in Adhesion and Adhesives, pp. 351–379, 2017. View at Publisher · View at Google Scholar
  • Moustapha E. Moustapha, Jörg F. Friedrich, Zeinab R. Farag, Simone Krüger, Gundula Hidde, and Maged M. Azzam, “Promotion of Adhesion of Green Flame Retardant Coatings onto Polyolefins by Depositing Ultra-Thin Plasma Polymer Films,” Progress in Adhesion and Adhesives, pp. 399–427, 2017. View at Publisher · View at Google Scholar
  • A. Lahmar, A. Assaf, M.J. Durand, S. Jouanneau, G. Thouand, and B. Garnier, “Factors Influencing Adhesion of Submicrometer Thin Metal Films,” Progress in Adhesion and Adhesives, pp. 45–65, 2017. View at Publisher · View at Google Scholar
  • Lisha Fan, Yun Shen Zhou, Meng Meng Wang, Jean-Fran?ois Silvain, and Yong Feng Lu, “Seed-free deposition of large-area adhesive diamond films on copper surfaces processed and patterned by femtosecond lasers,” Thin Solid Films, 2017. View at Publisher · View at Google Scholar
  • Sanjayan Sathasivam, Benjamin Albert Dobson Williamson, Shaeel A. Al Thabaiti, Abdullah Y. Obaid, Sulaiman N. Basahel, Mohamed Mokhtar, David O. Scanlon, Claire J. Carmalt, and Ivan P. Parkin, “Chemical Vapor Deposition Synthesis and Optical Properties of Nb2O5 thin films with Hybrid Functional Theoretical Insight into Band Structure and Band Gaps,” ACS Applied Materials & Interfaces, 2017. View at Publisher · View at Google Scholar
  • Andrew L. Robertson, and Ken W. White, “Microscale fracture mechanisms of a Cr3C2-NiCr HVOF coating,” Materials Science and Engineering A, vol. 688, pp. 62–69, 2017. View at Publisher · View at Google Scholar
  • Bikash Sarma, and Bimal K. Sarma, “Fabrication of Ag/ZnO heterostructure and the role of surface coverage of ZnO microrods by Ag nanoparticles on the photophysical and photocatalytic properties of the metal-semiconductor system,” Applied Surface Science, 2017. View at Publisher · View at Google Scholar
  • Chandini C. Mohan, Aleena Mary Cherian, Sujish Kurup, John Joseph, Manitha B. Nair, Maniyal Vijayakumar, Shantikumar V. Nair, and Deepthy Menon, “Stable Titania Nanostructures on Stainless Steel Coronary Stent Surface for Enhanced Corrosion Resistance and Endothelialization,” Advanced Healthcare Materials, pp. 1601353, 2017. View at Publisher · View at Google Scholar
  • Victor P. Siller, Keller Andrews, and Anthony B. Kaye, “The Effects of Substrate Plasma Etching on the Performance of Thin Metal Films,” Thin Solid Films, 2017. View at Publisher · View at Google Scholar
  • L.S. Qiu, X.D. Zhu, S. Lu, G.Y. He, and K.W. Xu, “Quantitative evaluation of bonding strength for hard coatings by interfacial fatigue strength under cyclic indentation,” Surface and Coatings Technology, 2017. View at Publisher · View at Google Scholar
  • Sarthak S. Singh, and Kitey, “Effect of interface profile and incident wave characteristics on aluminum/epoxy dynamic adhesion strength,” International Journal of Adhesion and Adhesives, vol. 79, pp. 8–17, 2017. View at Publisher · View at Google Scholar
  • D. Sumanth Kumar, B. Jai Kumar, and H.M. Mahesh, “Polyelectrolyte layer-by- layer spin assembly of aqueous CdTe quantum dot multilayered thin films,” Journal of Alloys and Compounds, 2017. View at Publisher · View at Google Scholar
  • Chong-Yang Nie, De-Zhi Zheng, Le Gu, Chi Zhang, and Li-Qin Wang, “interface mechanical analysis of ultra thin film-substrate system under the linear contact,” Gongcheng Lixue/Engineering Mechanics, vol. 34, no. 12, pp. 202–209, 2017. View at Publisher · View at Google Scholar
  • Hyeong Sick Ju, and Bernhard R. Tittmann, “Adhesion evaluation of pmma/silicon film structures,” Acta Acustica united with Acustica, vol. 103, no. 6, pp. 998–1008, 2017. View at Publisher · View at Google Scholar
  • Brijesh Singh Yadav, Amol C. Badgujar, and Sanjay R. Dhage, “Effect of various surface treatments on adhesion strength of magnetron sputtered bi-layer Molybdenum thin films on soda lime glass substrate,” Solar Energy, vol. 157, pp. 507–513, 2017. View at Publisher · View at Google Scholar
  • Ramin Soltanzadeh, Elnaz Afsharipour, Cyrus Shafai, Neda Anssari, Behzad Mansouri, and Zahra Moussavi, “Molybdenum coated SU-8 microneedle electrodes for transcutaneous electrical nerve stimulation,” Biomedical Microdevices, vol. 20, no. 1, 2017. View at Publisher · View at Google Scholar
  • Kamyar Karimi, Elahe Jabari, Ehsan Toyserkani, and Pearl Lee-Sullivan, “Highly conductive graphene paper for flexible electronics applications,” Journal of Materials Science: Materials in Electronics, 2017. View at Publisher · View at Google Scholar
  • Sanjayan Sathasivam, Benjamin A. D. Williamson, Andreas Kafizas, Shaeel A. Althabaiti, Abdullah Y. Obaid, Sulaiman N. Basahel, David O. Scanlon, Claire J. Carmalt, and Ivan P. Parkin, “ Computational and Experimental Study of Ta 2 O 5 Thin Films ,” The Journal of Physical Chemistry C, 2017. View at Publisher · View at Google Scholar
  • Almabrok A. Ashor, Marija M. Vuksanović, Nataša Z. Tomić, Aleksandar Marinković, and Radmila Jančić Heinemann, “The influence of alumina particle modification on the adhesion of the polyacrylate matrix composite films and the metal substrate,” Composite Interfaces, pp. 1–14, 2018. View at Publisher · View at Google Scholar
  • Victor G. Zavodinsky, and Yuri G. Kabaldin, “Modeling study of adhesion in the TiN/Ti, TiN/ZrN, TiN/Ti/ZrN, and TiN/Zr/ZrN layered systems,” The Journal of Adhesion, pp. 1–14, 2018. View at Publisher · View at Google Scholar
  • N. Mavridi, J. Zhu, N. M. Eldose, K. A. Prior, and R. T. Moug, “Adhesion Measurements of Epitaxially Lifted MBE-Grown ZnSe,” Journal of Electronic Materials, 2018. View at Publisher · View at Google Scholar
  • Meidong Han, Lin-An Li, Wei He, Shibin Wang, and Xiuli Xue, “Micromechanics of substrate-supported thin films,” Acta Mechanica Sinica/Lixue Xuebao, vol. 34, no. 2, pp. 381–391, 2018. View at Publisher · View at Google Scholar
  • Sadaf B. Khan, Hui Wu, Jianghao Li, Limin Chen, and Zhengjun Zhang, “ Bilayer SiO 2 Nanorod Arrays as Omnidirectional and Thermally Stable Antireflective Coating ,” Advanced Engineering Materials, pp. 1700942, 2018. View at Publisher · View at Google Scholar
  • Soma Sekhar V. Kandula, “Laser Based Adhesion Testing Technique to Measure Thin Film-Substrate Interface Toughness,” Laser Technology, pp. 269–298, 2018. View at Publisher · View at Google Scholar
  • Abdullah M. Alotaibi, Sanjayan Sathasivam, Benjamin A. D. Williamson, Andreas Kafizas, Carlos Sotelo-Vazquez, Alaric Taylor, David O. Scanlon, and Ivan P. Parkin, “ Chemical Vapor Deposition of Photocatalytically Active Pure Brookite TiO 2 Thin Films ,” Chemistry of Materials, vol. 30, no. 4, pp. 1353–1361, 2018. View at Publisher · View at Google Scholar
  • James D. Boyd, Stuart C. Ross, and Martha E. Grady, “Development of Biofilm-Surface Adhesion Technique via Laser-Induced Stress Waves,” Mechanics of Biological Systems & Micro-and Nanomechanics, Volume 4, pp. 81–83, 2018. View at Publisher · View at Google Scholar
  • Philipus Hishimone, Hiroki Nagai, Masato Morita, Tetsuo Sakamoto, and Mitsunobu Sato, “Highly-Conductive and Well-Adhered Cu Thin Film Fabricated on Quartz Glass by Heat Treatment of a Precursor Film Obtained Via Spray-Coating of an Aqueous Solution Involving Cu(II) Complexes,” Coatings, vol. 8, no. 10, pp. 352, 2018. View at Publisher · View at Google Scholar