Table of Contents Author Guidelines Submit a Manuscript
Active and Passive Electronic Components
Volume 2007, Article ID 15754, 5 pages
http://dx.doi.org/10.1155/2007/15754
Research Article

Substrate Effect on Plasma Clean Efficiency in Plasma Enhanced Chemical Vapor Deposition System

1Department of Applied Physics, Graduate Institute of Optoelectronics and Solid State Electronics, National Chiayi University, Chiayi, Taiwan
2Department of Material Science, College of Science and Engineering, National University of Tainan, Tainan, Taiwan

Received 1 June 2007; Accepted 19 November 2007

Academic Editor: Krishnamachar Prasad

Copyright © 2007 Shiu-Ko JangJian and Ying-Lang Wang. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. B. E. E. Kastenmeier, P. J. Matsuo, G. S. Oehrlein, and J. G. Langan, “Remote plasma etching of silicon nitride and silicon dioxide using NF3/O2 gas mixtures,” Journal of Vacuum Science and Technology A, vol. 16, no. 4, pp. 2047–2056, 1998. View at Publisher · View at Google Scholar
  2. T. Kawane, “PFC Recovery/Re-Use Technology is a Pressing Need,” Semiconductor International, vol. 3, p. 66, 1997.
  3. S. Lakeman, “Increase overall equipment effectiveness with in situ mass spectrometry,” Semiconductor International, vol. 18, p. 127, 1995.
  4. M. G. Blain, T. L. Meisenheimer, and J. E. Stevens, “Role of nitrogen in the downstream etching of silicon nitride,” Journal of Vacuum Science and Technology A, vol. 14, no. 4, pp. 2151–2157, 1996. View at Publisher · View at Google Scholar
  5. B. E. E. Kastenmeier, P. J. Matsuo, J. J. Beulens, and G. S. Oehrlein, “Chemical dry etching of silicon nitride and silicon dioxide using CF4/O2/N2 gas mixtures,” Journal of Vacuum Science and Technology A, vol. 14, no. 5, pp. 2802–2813, 1996. View at Publisher · View at Google Scholar
  6. J. G. Langan, S. E. Beck, B. S. Felker, and S. W. Rynders, “The role of diluents in electronegative fluorinated gas discharges,” Journal of Applied Physics, vol. 79, no. 8, pp. 3886–3894, 1996. View at Publisher · View at Google Scholar
  7. J. G. Langan, S. W. Rynders, B. S. Felker, and S. E. Beck, “Electrical impedance analysis and etch rate maximization in NF3/Ar discharges,” Journal of Vacuum Science and Technology A, vol. 16, pp. 2108–2114, 1998.
  8. M. A. Sobolewski, J. G. Langan, and B. S. Felker, “Electrical optimization of plasma-enhanced chemical vapor deposition chamber cleaning plasmas,” Journal of Vacuum Science and Technology B, vol. 16, no. 1, pp. 173–182, 1998. View at Publisher · View at Google Scholar