Research Article
Multiobjective Optimization Method for Polymer Injection Molding Based on a Genetic Algorithm
Table 5
Results of mean-value analysis.
| Label | r | t | h | d | s | | | | | | RE | D | V/P | | |
| 1 | 0.8005 | 0.7034 | 0.8608 | 0.8855 | 0.938 | 0.8681 | 0.7414 | 0.6716 | 0.9243 | 0.9012 | 0.8731 | 0.93 | 0.7896 | 0.9859 | 1.1383 | 2 | 0.96 | 1.0571 | 0.8997 | 0.875 | 0.8225 | 0.8924 | 1.0191 | 1.089 | 0.8362 | 0.8594 | 0.8875 | 0.8306 | 0.9709 | 0.7747 | 0.6222 | Delta | 0.1595 | 0.3537 | 0.0389 | 0.0106 | 0.1155 | 0.0243 | 0.2778 | 0.4174 | 0.088 | 0.0418 | 0.0144 | 0.0994 | 0.1813 | 0.2112 | 0.5161 | Rank | 7 | 3 | 12 | 15 | 8 | 13 | 4 | 2 | 10 | 11 | 14 | 9 | 6 | 5 | 1 |
|
|