Research Article
Experimental and Numerical Study Determining the Warpage Phenomenon of Thin-Wall Injection Molding
Table 1
Process parameters for thin-wall injection molding using ABS+PC materials.
| Level/parameter | Level 1 | Level 2 | Level 3 | Level 4 |
| A. Injection speed (mm/s) | 97 | 98 | 99 | 100 | B. Injection pressure (MPa) | 55 | 60 | 65 | 70 | C. Mold temp. (°C) | 60 | 70 | 80 | 90 | D. Packing time (s) | 3 | 4 | 5 | 6 | E. Melt temp. (°C) | 215 | 220 | 225 | 230 |
|
|