Research Article
Microstructure, Tensile Property, and Surface Quality of Glass Fiber-Reinforced Polypropylene Parts Molded by Rapid Heat Cycle Molding
Table 1
Processing parameters used in RHCM tests.
| Melt temperature (°C) | Injection pressure (MPa) | Injection velocity (%) | Packing time (s) | Packing pressure (MPa) | Mold heating temperature (°C) | Cooling time (s) |
| 240 | 60 | 45 | 9 | 50 | 60/90/120 | 30 |
|
|