Numerical Simulation on the Penetration Behavior of the Projectile during the Water Injection Stage of Water-Projectile-Assisted Injection Molding Process

<div>Comparison of the strain rate distribution near the penetration front at the middle location of straight segments between WAIM and W-PAIM: (a) strain rate magnitude contour of WAIM, (b) strain rate magnitude contour of W-PAIM, (c) strain rate profiles at position I, (d) strain rate profiles at position II, and (e) strain rate profiles at position III (I denotes the location of 0.04 mm, II is 0.05 mm, and III is 0.06 mm).</div>

Advances in Polymer Technology

fig8

Figure 8

Figure 8: Numerical Simulation on the Penetration Behavior of the Projectile during the Water Injection Stage of Water-Projectile-Assisted Injection Molding Process 

Figure 8 | Numerical Simulation on the Penetration Behavior of the Projectile during the Water Injection Stage of Water-Projectile-Assisted Injection Molding Process 