Table of Contents Author Guidelines Submit a Manuscript
Advances in Tribology
Volume 2011 (2011), Article ID 810254, 16 pages
http://dx.doi.org/10.1155/2011/810254
Review Article

Model of Fracture, Friction, and Wear Phenomena of Porous Iron

Mechanical Technological Faculty, State National Research Politechnical University of Perm, 29 Komsomolskii Avenue, Perm 614990, Russia

Received 16 June 2011; Revised 8 September 2011; Accepted 8 September 2011

Academic Editor: Luca Settineri

Copyright © 2011 A. A. Shatsov et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. H. P. Dzhoy, “The past and the future of tribology,” Journal of Friction and Wear, vol. 11, no. 1, pp. 149–159, 1990 (Russian). View at Google Scholar · View at Scopus
  2. A. A. Kuklin, E. S. Michkova, and V. Y. Bulanov, Technology and Economics of Powder Metallurgy, Nauka, Moscow, Russia, 1989.
  3. H. Danninger, C. Gierl, G. Mühlbauer, M. S. Gonzalez, J. Schmidt, and E. Specht, “Thermophysical properties of sintered steels: effect of porosity,” International Journal of Powder Metallurgy, vol. 47, no. 3, pp. 31–41, 2011. View at Google Scholar
  4. C. Sohar, A. Betzwar-Kotas, C. Gierl, H. Danninger, and B. Weiss, “Gigacycle fatigue response of tool steels produced by powder metallurgy compared to ingot metallurgy tool steels,” International Journal of Materials Research, vol. 101, no. 9, pp. 1140–1150, 2010. View at Publisher · View at Google Scholar · View at Scopus
  5. M. Dlapka, H. Danninger, C. Gierl, and B. Lindqvist, “Defining the pores in PM components,” Metal Powder Report, vol. 65, no. 2, pp. 30–33, 2010. View at Publisher · View at Google Scholar · View at Scopus
  6. H. Winkelmann, M. Varga, E. Badisch, and H. Danninger, “Wear mechanisms at high temperatures. Part 2: temperature effect on wear mechanisms in the erosion test,” Tribology Letters, vol. 34, no. 3, pp. 167–175, 2009. View at Publisher · View at Google Scholar · View at Scopus
  7. H. Winkelmann, E. Badisch, M. Kirchgaßner, and H. Danninger, “Wear mechanisms at high temperatures. Part 1: wear mechanisms of different Fe-based aAlloys at elevated temperatures,” Tribology Letters, vol. 34, no. 3, pp. 155–166, 2009. View at Publisher · View at Google Scholar · View at Scopus
  8. P. Beiss and S. Lindlohr, “Porosity statistics and fayigue strength,” International Journal of Powder Metallurgy, vol. 45, no. 2, pp. 39–48, 2009. View at Google Scholar · View at Scopus
  9. P. Beiss and S. Lindlohr, “Correlation between extreme value porosity rating and fatigue strength of sintered steel,” Materialpruefung/Materials Testing, vol. 50, no. 3, pp. 126–132, 2008. View at Google Scholar · View at Scopus
  10. P. Ganesan, Ş Domşa, and P. Beiss, “Fracture toughness of PM alloy steels,” Powder Metallurgy, vol. 48, no. 4, pp. 323–328, 2005. View at Publisher · View at Google Scholar · View at Scopus
  11. M. Campos, J. Sicre-Artalejo, J. J. Munoz, and J. M. Torralba, “Effect of austempering conditions on the microstructure and tensile properties of low alloyed sintered steel,” Metallurgical and Materials Transactions A, vol. 41, no. 7, pp. 1847–1854, 2010. View at Publisher · View at Google Scholar · View at Scopus
  12. M. Campos, J. M. Torralba, C. Menapace, and A. Molinari, “Effect of copper infiltration on fracture mode in sintered steels,” Powder Metallurgy, vol. 51, no. 2, pp. 176–181, 2008. View at Publisher · View at Google Scholar · View at Scopus
  13. R. Bidulský, M. A. Grande, and J. Bidulská, “Microstructures and fracture investigations of low alloyed vacuum treated sintered steel,” Chemicke Listy, vol. 105, no. 16, pp. 506–509, 2011. View at Google Scholar
  14. R. Bidulský, M. A. Grande, and M. Kabátová, “Improved fatigue resistance of sintered steels via local hardening,” Chemicke Listy, vol. 105, no. 14, pp. 159–162, 2011. View at Google Scholar
  15. M. Rosso, E. Dudrova, M. Actis Grande, and R. Bidulský, “Wear characteristics of vacuum sintered steels,” Materials Science Forum, vol. 672, pp. 17–22, 2011. View at Publisher · View at Google Scholar
  16. R. Bidulský, M. A. Grande, J. Bidulská, M. Vlado, and T. Kvačkaj, “Wear mechanism of Chromium Pre-alloyed sintered steel,” High Temperature Materials and Processes, vol. 28, no. 3, pp. 175–180, 2009. View at Google Scholar
  17. R. Bidulský, M. A. Grande, J. Bidulská, and T. Kvačkaj, “Wear resistance of chromium pre-alloyed sintered steels,” Materiali in Tehnologije, vol. 43, no. 6, pp. 303–308, 2009. View at Google Scholar
  18. E. Dudrova, M. Kabatova, R. Bures, R. Bidulsky, and A. S. Wronski, “Processing, microstructure and properties of 2–4 % Mn and 0.3/0.7 % C sintered steels,” Kovove Materialy, vol. 43, no. 6, pp. 404–421, 2005. View at Google Scholar
  19. S. E. Aleksandrov, A. R. Pirumov, and O. V. Chesnikova, “Plastic flow of porous materials in friction contact area,” Powder Metallurgy and Metal Ceramics, vol. 47, no. 9-10, pp. 512–517, 2008. View at Publisher · View at Google Scholar · View at Scopus
  20. A. V. Vdovichenko, Y. N. Podrezov, and V. V. Skorokhod, “Mechanical resonance spectroscopy of interparticle boundaries in high-density iron powder compacts,” Powder Metallurgy and Metal Ceramics, vol. 47, no. 5-6, pp. 366–372, 2008. View at Publisher · View at Google Scholar · View at Scopus
  21. A. S. Drachinskii, A. E. Kushchevskii, A. V. Perepelkin et al., “Effect of porosity on the resistance of P/M iron to cracking,” Soviet Powder Metallurgy and Metal Ceramics, vol. 21, no. 12, pp. 973–977, 1982. View at Publisher · View at Google Scholar · View at Scopus
  22. A. G. Evans and T. G. Langdon, Structural Ceramics, Metallurgiya, Moscow, Russia, 1980.
  23. S. N. Platov, V. G. Kudryashov, M. L. Bernstein et al., “On the estimation of parameters of porous materials fracture toughness,” Physicochemical Mechanics of Materials, no. 5, pp. 20–24, 1974 (Russian). View at Google Scholar
  24. L. W. Crane and R. J. Farrow, “Effect of sintering conditions on fracture toughness of a commercial alloy steel,” Powder Metallurgy, vol. 23, no. 5, pp. 198–202, 1980. View at Google Scholar · View at Scopus
  25. G. A. Klarke and R. A. Queeney, “Fracture toughness and density in sintered 316L stainless steel,” The International Journal of Powder Metallurgy, vol. 8, no. 2, pp. 81–202, 1972. View at Google Scholar
  26. F. J. Esper, G. Leuze, and C. M. Sonsino, “Characteristic properties of powder metallurgical materials relevant to fatigue design,” Powder Metallurgy International, vol. 13, no. 4, pp. 203–208, 1981. View at Google Scholar
  27. A. G. Zherdin, S. A. Firstov, and L. G. Bayonet, “Fracture and ductile-brittle transition in powder materials,” Technological and Structural Plasticity of the Powder Materials, vol. S, pp. 89–92, 1988 (Russian). View at Google Scholar
  28. J. T. Barnby, D. C. Ghosh, and K. Dinsdale, “The fracture—resistance of a range of sintered steels,” Powder Metallurgy, vol. 16, no. 31, pp. 55–71, 1973 (Russian). View at Google Scholar · View at Scopus
  29. N. Ingelstrom and V. Ustimenko, “Influence of porosity and carbon content on the fracture toughness of some sintered steels,” Powder Metallurgy, vol. 18, no. 36, pp. 303–322, 1975. View at Google Scholar · View at Scopus
  30. N. Ingelstrom and H. Nordberg, “The fracture toughness of flighstrength and highductility sintereel steels,” Scandina an Journal of Metallurgy, no. 4, pp. 189–192, 1975. View at Google Scholar
  31. M. Shlesar, A. Parilak , K. Pelikan et al., “Influence of porosity on the mechanical properties of sintered materials,” in Proceedings of the Workshop on the Development and Use of Powder Metallurgy in Engineering, p. 17, Minsk, Belarus, 1985, Report from the Institute of Experimental Metallurgy.
  32. L. A. Zheltonoga and I. P. Gabrielov, “Characteristics of crack growth in sintered materials,” Soviet Powder Metallurgy and Metal Ceramics, vol. 18, no. 10, pp. 744–748, 1979. View at Publisher · View at Google Scholar · View at Scopus
  33. A. S. Drachinsky, A. V. Krainov, and A. E. Kuschevsky, “The relationship with portion of intergranular fracture of iron powder,” Powder Metallurgy, no. 1, pp. 43–45, 1985 (Russian). View at Google Scholar
  34. N. B. Romalis, “Calculation of effective stress intensity factors of structurally inhomogeneous bodies with cracks,” Mechanics of Composite Materials, vol. 23, no. 3, pp. 287–290, 1987. View at Publisher · View at Google Scholar · View at Scopus
  35. G. Prefferborn, “Grundznge der fraktographie von eisenwerkstoffen,” Radex Rundschan, no. 3, pp. 591–673, 1978. View at Google Scholar
  36. V. Z. Parton and E. M. Morozov, The Mechanics of Elastoplastic Fracture, Nauka, Moscow, Russia, 1974.
  37. Y. L. Krasulin, S. M. Barinov, and V. S. Ivanov, Structure and Fracture of Materials from Powders of Refractory Compounds, Nauka, Moscow, Russia, 1985.
  38. A. S. Drachinsky, Y. N. Petrov, and V. I. Trefilov, “The dislocation structure and properties of the propagation of a ductile crack in armco iron,” Ukraine National Magazine, no. 13, pp. 1538–1542, 1968 (Russian). View at Google Scholar
  39. V. M. Finkel, Physical Basis of Fracture Inhibition, Metallurgiya, Moscow, Russia, 1977.
  40. D. R. Biswas, “Crack-void interaction in polycrystalline alumina,” Journal of Materials Science, vol. 16, no. 9, pp. 2434–2438, 1981. View at Publisher · View at Google Scholar · View at Scopus
  41. F. F. Lang, “The interaction of a crack front with second-phcese dispersion,” Philosophical Magazine, vol. 23, no. 179, pp. 983–992, 1970. View at Google Scholar
  42. Y. I. Ragozin and Y. Y. Antonov, “Method of accelerated fracture toughness KIc testing of metallic materials,” Strength of Materials, vol. 16, no. 2, pp. 179–184, 1984. View at Publisher · View at Google Scholar · View at Scopus
  43. V. S. Ivanova, L. R. Batvina, and L. I. Malov, “Prediction of fracture toughness and other mechanical properties, using the similarity criteria,” in Fatigue and Fracture of Metals, pp. 3–35, Nauka, Moscow, Russia, 1974. View at Google Scholar
  44. W. Dhal and W. Anton, Werkstoffkunde Eisen und Stahl, Verlag Stahleisen mbH, Dusseldorf, Germany, 1983.
  45. S. V. Belov, Porous Metals in Mechanical Engineering, Mashinostroenie, Moscow, Russia, 1981.
  46. M. Balshin and S. G. Fedosov, “Contact and the elastic characteristics of copper powder ,” Metals, no. 1, pp. 166–172, 1965 (Russian). View at Google Scholar
  47. K. Kreider, Ed., Composite Materials, Composites with Metal Matrix, Mashinostroenie, Moscow, Russia, 1978.
  48. R. W. Cahn, Physical Metallurgy, North-Holland, Amsterdam, The Netherlands, 1978.
  49. F. F. Lange, “The interaction of a crack front with a second-phase dispersion,” The Philosophical Magazine, vol. 22, no. 179, pp. 983–992, 1970. View at Google Scholar
  50. P. S. Theocaris and J. Milios, “Crack arrest modes of a transverse crack going through a longitudinal crack or a hole,” Journal of Engineering Materials and Technology, Transactions of the ASME, vol. 103, no. 2, pp. 177–182, 1981. View at Google Scholar · View at Scopus
  51. V. N. Antsiferov, “Features of powder material deformation with cyclic loading,” Powder Metallurgy and Metal Ceramics, vol. 40, no. 11-12, pp. 569–572, 2001. View at Google Scholar · View at Scopus
  52. A. A. Shatsov, “Mechanical properties of porous materials,” Metal Science and Heat Treatment, vol. 45, no. 11-12, pp. 441–444, 2003. View at Publisher · View at Google Scholar · View at Scopus
  53. Y. V. Kolesnikov and E. M. Morozov, Mechanics of Contact Fracture, Nauka, Moscow, Russia, 1989.
  54. I. M. Fedorchenko, A. E. Kushchevskii, V. V. Pushkarev, A. S. Drachinskii, A. V. Perepelkin, and Y. N. Podrezov, “Influence of porosity on the tribological properties of iron-base powder metallurgy materials,” Soviet Powder Metallurgy and Metal Ceramics, vol. 23, no. 5, pp. 394–396, 1984. View at Publisher · View at Google Scholar · View at Scopus
  55. A. E. Kushchevskii, V. T. Bondar', N. A. Krylova, T. F. Mozol, and O. M. Romanenko, “An investigation of the structure of powder metallurgy iron with different porosities by scanning electron microscopy,” Soviet Powder Metallurgy and Metal Ceramics, vol. 29, no. 9, pp. 745–748, 1990. View at Publisher · View at Google Scholar · View at Scopus
  56. V. N. Antsiferov, N. N. Maslennikov, A. A. Shatsov, and I. A. Polovnikov, “Determining the carrying capacity of powdered materials under boundary lubrication,” Journal of Friction and Wear, vol. 12, no. 4, pp. 683–686, 1991 (Russian). View at Google Scholar
  57. I. I. Berkowitz and D. G. Gromakovsky, Tribology, Samara State University, Samara, Russia, 2000.
  58. GOST 23.225-99, “Ensuring durability of products. Methods of durability confirmation. General requirements” (Russian).
  59. I. V. Kragelskii and N. M. Mihin, Friction Units of Machines, Mashinostroenie, Moscow, Russia, 1984.
  60. B. A. Drozdovskii and Y. B. Friedman, The Influence of Cracks on the Mechanical Properties of Structural Steel, Metallurgizdat, Moscow, Russia, 1960.
  61. V. N. Antsiferov, N. N. Maslennikov, and A. A. Shatsov, “Strength and fracture toughness of powder steels,” in Proceedings of the Universities. Iron and steel industry, no. 2, pp. 20–22, 1989.
  62. V. N. Antsiferov, N. N. Maslennikov, and A. A. Shatsov, “Effect of porosity on coefficient of friction of iron,” Journal of Friction and Wear, vol. 13, no. 4, pp. 702–706, 1992 (Russian). View at Google Scholar · View at Scopus
  63. G. Poltser and F. Meisner, Foundations of Friction and Wear, Mashinostroenie, Moscow, Russia, 1984.
  64. V. D. Zozulya, V. V. Polotay, I. A. Panfilova, and L. E. Lukin, “Effect of porosity on the plastic deformation of the surface layer at frictionsintered iron,” Journal of Friction and Wear, vol. 10, no. 2, pp. 289–294, 1989 (Russian). View at Google Scholar
  65. N. G. Baranov, L. V. Zabolotny, Y. V. Ivashchenko, I. A. Koseko, and G. A. Avtonomov, “Investigation of physico-chemical phenomena that occur when iron powderfriction on ceramic,” Journal of Friction and Wear, vol. 11, no. 1, pp. 143–148, 1990 (Russian). View at Google Scholar
  66. A. Vutke, E. A. Marchenko, A. Shiling, H. Reinhold, and D. Stemler, “On the quantitative criteria for structural failure of metals in friction,” Journal of Friction and Wear, vol. 10, no. 3, pp. 434–441, 1989 (Russian). View at Google Scholar
  67. Z. G. Pinchuk and E. G. Shiolovskaya, “Relationship microstructural changes with the kinetics of wear of the surface layer of metal in friction,” Journal of Friction and Wear, vol. 10, no. 6, pp. 965–972, 1989 (Russian). View at Google Scholar
  68. I. Z. Kragelskii, Friction and Wear, Mashinostroenie, Moscow, Russia, 1968.
  69. Y. Y. Meshkov, Physical Basis of Fracture of Steel Structures, Naukova Dumka, Kiev, Ukraine, 1981.
  70. V. N. Antsiferov, S. N. Peshcherenko, A. A. Shatsov, and N. N. Maslennikov, “Effect of pores on fracture of iron,” Strength of Materials, vol. 21, no. 2, pp. 161–164, 1989. View at Publisher · View at Google Scholar
  71. O. N. Romaniv, E. A. Shur, A. N. Tkach, V. N. Simin'kovich, and T. N. Kiseleva, “kinetics and mechanism of fatigue crack growth in iron,” Physico-Chemical Mechanics of Materials, vol. 17, no. 2, pp. 57–66, 1981 (Russian). View at Publisher · View at Google Scholar
  72. I. V. Kragelskii and V. V. Alisin, Eds., Friction, Wear and Lubrication, vol. 2, Mashinostroenie, Moscow, Russia, 1979.
  73. K. M. Fedorchenko and L. I. Pugina, Composite Sintered Antifriction Materials, Naukova Dumka, Kiev, Ukraine, 1980.
  74. A. M. Ryakhovskii, “Calculation of wear intensity of construction materials under elastoplastic friction-contact interaction,” Journal of Friction and Wear, vol. 11, no. 1, pp. 42–48, 1990 (Russian). View at Google Scholar
  75. L. S. Moroz, Mechanics and Physics of Deformation and Fracture of Materials, Mashinostroenie, Moscow, Russia, 1984.
  76. V. N. Antsiferov, N. N. Maslennikov, and A. A. Shatsov, “Strength and fracture toughness of powder steels,” in Proceedings of the Universities. Iron and Steel, no. 3, pp. 124–129, 1989.
  77. V. N. Antsiferov, N. N. Maslennikov, A. A. Shatsov, and V. B. Platonova, “Effect of heat treatment on the crack resistance of powder steel SP50Kh3NM,” Metal Science and Heat Treatment, vol. 33, no. 8, pp. 617–620, 1991. View at Publisher · View at Google Scholar
  78. V. N. Antsiferov, N. N. Maslennikov, and A. A. Shatsov, “Now to determine friction coefficients of sintered steels?” Journal of Friction and Wear, vol. 14, no. 6, pp. 1082–1086, 1993 (Russian). View at Google Scholar
  79. V. N. Antsiferov, N. N. Maslennikov, and A. A. Shatsov, “Friction wearing powder steels without additional feeding lubricant,” Journal of Friction and Wear, vol. 15, no. 6, pp. 1022–1027, 1994 (Russian). View at Google Scholar
  80. V. N. Antsiferov and A. A. Shatsov, “Friction and wear of powder steels under lubricant limited supply conditions,” Journal of Friction and Wear, vol. 16, no. 2, pp. 315–322, 1995 (Russian). View at Google Scholar
  81. V. N. Antsiferov and A. A. Shatsov, “Friction and wear of powder aluminum bronze of optimal composition,” Journal of Friction and Wear, vol. 17, no. 2, pp. 56–60, 1996. View at Google Scholar
  82. V. N. Antsiferov, T. V. Smyshlyaeva, and A. A. Shatsov, “Self-lubricating copper-based pseudoalloy for antifriction and constructional products,” Journal of Friction and Wear, vol. 17, no. 4, pp. 497–502, 1996 (Russian). View at Google Scholar
  83. A. A. Shatsov, “Tribological characteristics of powder steels under boundary friction,” Advanced Materials, no. 2, pp. 69–73, 2001 (Russian). View at Google Scholar
  84. A. A. Shatsov, “Prediction of tribological characteristics of powder steels under dry friction,” Advanced Materials, no. 5, pp. 71–77, 2000. View at Google Scholar