Table of Contents Author Guidelines Submit a Manuscript
Advances in Tribology
Volume 2011, Article ID 906481, 13 pages
http://dx.doi.org/10.1155/2011/906481
Research Article

Characterization of Tool Wear in High-Speed Milling of Hardened Powder Metallurgical Steels

Fraunhofer Institute for Production Technology IPT, Steinbachstraße 17, 52074 Aachen, Germany

Received 30 June 2011; Accepted 29 August 2011

Academic Editor: Alexander Tsouknidas

Copyright © 2011 Fritz Klocke et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

Fritz Klocke, Kristian Arntz, Gustavo Francisco Cabral, Martin Stolorz, and Marc Busch, “Characterization of Tool Wear in High-Speed Milling of Hardened Powder Metallurgical Steels,” Advances in Tribology, vol. 2011, Article ID 906481, 13 pages, 2011. https://doi.org/10.1155/2011/906481.