Table of Contents Author Guidelines Submit a Manuscript
Advances in Tribology
Volume 2011, Article ID 974065, 12 pages
Research Article

Dynamic Mechanical Properties of Oxide Films Formed on Metallic Surfaces as Measured Using a Tribological Approach at High Temperature

Department of Chemical Engineering, Hiroshima University, Kagamiyama, Higashi-Hiroshima 739-8527, Japan

Received 26 July 2011; Accepted 20 August 2011

Academic Editor: J. Paulo Davim

Copyright © 2011 Yoshinori Isomoto Oka and Toshinori Tsumura. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. Y. Ihara, H. Ohgame, K. Sakiyama, and K. Hashimoto, “The corrosion behaviour of iron in hydrogen chloride gas and gas mixtures of hydrogen chloride and oxygen at high temperatures,” Corrosion Science, vol. 21, no. 12, pp. 805–817, 1981. View at Google Scholar · View at Scopus
  2. S. Hayashi, M. Fukumoto, S. Maeda, and T. Narita, “The effect of water vapor on oxidation behavior of iron-X(X = Al, Cr or Si) alloys at high temperature,” JSCE Journal (Zairyo-to-Kankyo), vol. 51, no. 3, pp. 115–122, 2002. View at Google Scholar · View at Scopus
  3. Y. Watanabe, Y. Yi, T. Kondo, K. Suzuki, and K. Kano, “Steam oxidation of ferritic heat-resistant steels for ultra supercritical boilers,” JSCE Journal (Zairyo-to-Kankyo), vol. 50, no. 2, pp. 50–56, 2001. View at Google Scholar · View at Scopus
  4. C. M. Xu and J. T. Guo, “Effect of nickel aluminide microcrystalline coating on high-temperature oxidation behavior of NiAl-33.5% Cr-0.5% Zr alloy,” Corrosion, vol. 59, no. 4, pp. 350–355, 2003. View at Google Scholar · View at Scopus
  5. I. G. Wright, V. K. Sethi, and A. J. Markworth, “A generalized description of the simultaneous processes of scale growth by high-temperature oxidation and removal by erosive impact,” Wear, vol. 186-187, no. 1, pp. 230–237, 1995. View at Google Scholar · View at Scopus
  6. S. Thavendra, T. Oe, and Y. I. Oka, “An attempt of life assessment of boiler materials under high temperature erosive environments,” in Proceedings of the 2nd International Conference on Environment Sensitive Cracking and Corrosion Damage (ESCCD '01), p. 148, Hiroshima, Japan, 2001.
  7. Y. I. Oka, T. Yoshida, Y. Yamada, T. Yasui, and S. Hata, “Evaluation of erosion and fatigue resistance of ion plated chromium nitride applied to turbine blades,” Wear, vol. 263, pp. 379–385, 2007. View at Publisher · View at Google Scholar · View at Scopus
  8. O. Bernard, G. Amiri, C. Haut, B. Feltz, A. M. Huntz, and M. Andrieux, “Mechanical and microstructural characterisation of oxide films damage,” Materials Science and Engineering A, vol. 335, no. 1-2, pp. 32–42, 2002. View at Publisher · View at Google Scholar · View at Scopus
  9. J. M. West, Basic Corrosion and Oxidation, Ellis Horwood, New York, NY, USA, 2nd edition, 1986.
  10. Y. I. Oka, Y. Mukai, and T. Tsumura, “Mechanical properties and adhesion of oxide films examined by a solid particle impact method at high temperature corrosive environments,” Wear, vol. 258, pp. 92–99, 2005. View at Publisher · View at Google Scholar · View at Scopus
  11. Y. I. Oka, T. Yamabe, and T. Tsumura, “Exfoliation and fracture behavior of oxide films formed on titanium and its alloy in high temperature environments,” Materials Science Forum, vol. 522-523, pp. 417–424, 2006. View at Google Scholar · View at Scopus
  12. I. M. Hutchings, “The behaviour of metals under ballistic impact at sub-ordnance velocities,” in Material Behavior under High Stress and Ultrahigh Loading Rates, J. Mescall and V. Weiss, Eds., vol. 29, p. 161, Proceedings of the Sagamore Army Materials Research Conference, 1983. View at Google Scholar
  13. Y. I. Oka, M. Matsumura, and T. Kawabata, “Relationship between surface hardness and erosion damage caused by solid particle impact,” Wear, vol. 162–164, pp. 688–695, 1993. View at Google Scholar · View at Scopus
  14. D. Tabor, The Hardness of Metals, Clarendon Press, Oxford, UK, 1951.