Table of Contents Author Guidelines Submit a Manuscript
Advances in Tribology
Volume 2012 (2012), Article ID 296464, 7 pages
http://dx.doi.org/10.1155/2012/296464
Research Article

Mixed and Fluid Film Lubrication Characteristics of Worn Journal Bearings

College of Manufacturing and Design Technology, Muroran Institute of Technology, 27-1, Mizumoto-cho, Hokkaido, Muroran 050-8585, Japan

Received 30 June 2011; Accepted 8 December 2011

Academic Editor: Gun Hee Jang

Copyright © 2012 Toshiharu Kazama and Yukihito Narita. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. J. A. Williams, Engineering Tribology, Oxford Science Publications, Oxford, UK, 1994.
  2. B. J. Hamrock, Fundamentals of Fluid Film Lubrication. International Editions, McGraw-Hill, New York, NY, USA, 1994.
  3. Japanese Society of Tribologists, Ed., Tribology Handbook, Yokendo, Rokyo, Japan, 2001.
  4. G. E. Totten, Handbook of Lubrication and Tribology: Application and Maintenance, vol. 1, CRC Press, New York, NY, USA, 2nd edition, 2006.
  5. K. F. Dufrane, J. W. Kannel, and T. H. McCloskey, “Wear of steam turbine journal bBearings at low operating speeds,” Journal of lubrication technology, vol. 105, no. 3, pp. 313–317, 1983. View at Google Scholar · View at Scopus
  6. H. Hashimoto, S. Wada, and K. Nojima, “Performance characteristics of worn journal bearings in both laminar and turbulent regime, part 1: steady-state characteristics,” ASLE transactions, vol. 29, no. 4, pp. 565–571, 1986. View at Google Scholar · View at Scopus
  7. H. Hashimoto, S. Wada, and K. Nojima, “Performance characteristics of worn journal bearings in both laminar and turbulent regime, part 2: dynamic characteristics,” ASLE transactions, vol. 29, no. 4, pp. 572–577, 1986. View at Google Scholar · View at Scopus
  8. A. Kumar and S. S. Mishra, “Stability of a rigid rotor in turbulent hydrodynamic worn journal bearings,” Wear, vol. 193, no. 1, pp. 25–30, 1996. View at Publisher · View at Google Scholar · View at Scopus
  9. A. Kumar and S. S. Mishra, “Steady state analysis of non-circular worn journal bearings in nonlaminar lubrication regimes,” Tribology International, vol. 29, no. 6, pp. 493–498, 1996. View at Publisher · View at Google Scholar · View at Scopus
  10. M. Tanaka and K. Suzuki, “The stability characteristics of two-lobe journal bearings with surface wear dents (1st report, theoretical analysis),” Transactions of the Japan Society of Mechanical Engineers, vol. 68, no. 5, pp. 1441–1446, 2002. View at Google Scholar · View at Scopus
  11. K. Suzuki and M. Tanaka, “The stability characteristics of two-lobe journal bearings with surface wear dents (2nd report, experimental verification and nonlinear vibration analysis),” Transactions of the Japan Society of Mechanical Engineers, vol. 68, no. 5, pp. 1447–1452, 2002. View at Google Scholar · View at Scopus
  12. M. Fillon and J. Bouyer, “Thermohydrodynamic analysis of a worn plain journal bearing,” Tribology International, vol. 37, no. 2, pp. 129–136, 2004. View at Publisher · View at Google Scholar · View at Scopus
  13. S. A. McKee and T. R. McKee, “Journal-bearing friction in the region of thin-film lLubrication,” SAE Journal, vol. 31, no. 3, pp. 371–377, 1932. View at Google Scholar
  14. J. T. Burwell, J. Kaye, D. W. van Nymegen, and D. A. Morgan, “Effects of surface finish,” Transactions of the American Society of Mechanical Engineers, vol. 8, no. 2, pp. A-49–A-59, 1941. View at Google Scholar
  15. L. F. Kreisle, “Predominant-peak surface roughness, A criterion for minimum hydrodynamic oil-film thickness of short journal bearings,” Transactions of the American Society of Mechanical Engineers, pp. 1235–1241, 1957. View at Google Scholar
  16. T. Kazama and M. Fujiwara, “Numerical analysis of multi-lobe hydrodynamic journal bearings in mixed lubrication,” Journal of JSDE, vol. 39, no. 1, pp. 40–45, 2004. View at Google Scholar
  17. M. Nonogaki and T. Nakahara, “Approximate formula for the contact between truncated surfaces and frictional characteristics of a journal bearing in mixed lubrication,” TriboTest, vol. 10, no. 3, pp. 225–240, 2004. View at Google Scholar · View at Scopus
  18. Q. Wang and H. S. Cheng, “Mixed lubrication model for journal bearings with a thin soft coating—part I: contact and lubrication analysis,” Tribology Transactions, vol. 38, no. 3, pp. 654–662, 1995. View at Google Scholar · View at Scopus
  19. Q. J. Wang, F. Shi, and S. C. Lee, “A mixed-lubrication study of journal bearing conformal contacts,” Journal of Tribology, vol. 119, no. 3, pp. 456–461, 1997. View at Google Scholar · View at Scopus
  20. Y. Wang, C. Zhang, Q. J. Wang, and C. Lin, “A mixed-TEHD analysis and experiment of journal bearings under severe operating conditions,” Tribology International, vol. 35, no. 6, pp. 395–407, 2002. View at Publisher · View at Google Scholar · View at Scopus
  21. N. Patir and H. S. Cheng, “Effect of surface roughness orientation on the central film thickness in E.H.D. contacts,” in Elastohydrodynamics and Related Topics (proceedings of the 5th Leeds-Lyon Symposium on Tribology), pp. 15–21, Elsevier, 1979. View at Google Scholar
  22. J. A. Greenwood and J. B. P. Williamson, “Contact of nominally flat surfaces,” Proceedings of Royal Society, London A, vol. 295, pp. 300–319, 1966. View at Google Scholar
  23. N. Patir and H. S. Cheng, “An average flow model for determining effects of three-dimensional roughness on partial hydrodynamic lubrication,” Journal of Lubrication Technology, Transactions of the American Society of Mechanical Engineers, vol. 100, no. 1, pp. 12–17, 1978. View at Google Scholar · View at Scopus
  24. N. Patir and H. S. Cheng, “Application of average flow model to lubrication between rRough sliding surfaces,” Journal of Lubrication Technology, vol. 101, no. 2, pp. 220–230, 1979. View at Google Scholar · View at Scopus
  25. A. Yamaguchi and H. Matsuoka, “Mixed lubrication model applicable to bearing/seal parts of hydraulic equipment,” Journal of Tribology, vol. 114, no. 1, pp. 116–121, 1992. View at Google Scholar · View at Scopus
  26. T. Kazama and A. Yamaguchi, “Application of a mixed lubrication model for hydrostatic thrust bearings of hydraulic equipment,” Journal of Tribology, vol. 115, no. 4, pp. 686–691, 1993. View at Google Scholar · View at Scopus
  27. K. L. Johnson, J. A. Greenwood, and S. Y. Poon, “A simple theory of asperity contact in elastohydro-dynamic lubrication,” Wear, vol. 19, no. 1, pp. 91–108, 1972. View at Google Scholar · View at Scopus