Table of Contents Author Guidelines Submit a Manuscript
Advances in Tribology
Volume 2016, Article ID 3978102, 10 pages
http://dx.doi.org/10.1155/2016/3978102
Research Article

A Quality Function Deployment-Based Model for Cutting Fluid Selection

Department of Production Engineering, Jadavpur University, Kolkata 700 032, India

Received 16 November 2015; Accepted 24 December 2015

Academic Editor: Huseyin Çimenoǧlu

Copyright © 2016 Kanika Prasad and Shankar Chakraborty. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. L. De Chiffre and W. Belluco, “Comparison of methods for cutting fluid performance testing,” Annals of the CIRP, vol. 49, no. 1, pp. 57–60, 2000. View at Google Scholar
  2. R. F. Ávila and A. M. Abrão, “The effect of cutting fluids on the machining of hardened AISI 4340 steel,” Journal of Materials Processing Technology, vol. 119, no. 1–3, pp. 21–26, 2001. View at Publisher · View at Google Scholar · View at Scopus
  3. D. A. Axinte, W. Belluco, and L. De Chiffre, “Reliable tool life measurements in turning—an application to cutting fluid efficiency evaluation,” International Journal of Machine Tools and Manufacture, vol. 41, no. 7, pp. 1003–1014, 2001. View at Publisher · View at Google Scholar · View at Scopus
  4. R. V. Rao and O. P. Gandhi, “Digraph and matrix method for the selection, identification and comparison of metal-cutting fluids,” Proceedings of the Institution of Mechanical Engineers Part J, vol. 215, no. 1, pp. 25–33, 2001. View at Publisher · View at Google Scholar · View at Scopus
  5. W. F. Sales, A. E. Diniz, and A. R. Machado, “Application of cutting fluids in machining processes,” Journal of the Brazilian Society of Mechanical Sciences, vol. 23, no. 2, pp. 227–240, 2001. View at Google Scholar
  6. M. Soković and K. Mijanović, “Ecological aspects of the cutting fluids and its influence on quantifiable parameters of the cutting processes,” Journal of Materials Processing Technology, vol. 109, no. 1-2, pp. 181–189, 2001. View at Publisher · View at Google Scholar · View at Scopus
  7. J. Sun, P. Ge, and Z. Liu, “Two-grade fuzzy synthetic decision-making system with use of an analytic hierarchy process for performance evaluation of grinding fluids,” Tribology International, vol. 34, no. 10, pp. 683–688, 2001. View at Publisher · View at Google Scholar · View at Scopus
  8. L. De Chiffre and W. Belluco, “Investigations of cutting fluid performance using different machining operations,” Lubrication Engineering, vol. 58, no. 10, pp. 22–29, 2002. View at Google Scholar · View at Scopus
  9. X. C. Tan, F. Liu, H. J. Cao, and H. Zhang, “A decision-making framework model of cutting fluid selection for green manufacturing and a case study,” Journal of Materials Processing Technology, vol. 129, no. 1-3, pp. 467–470, 2002. View at Publisher · View at Google Scholar · View at Scopus
  10. A. S. Varadarajan, P. K. Philip, and B. Ramamoorthy, “Investigations on hard turning with minimal cutting fluid application (HTMF) and its comparison with dry and wet turning,” International Journal of Machine Tools and Manufacture, vol. 42, no. 2, pp. 193–200, 2002. View at Publisher · View at Google Scholar · View at Scopus
  11. O. Cakir, A. Yardimeden, T. Ozben, and E. Kilickap, “Selection of cutting fluids in machining processes,” Journal of Achievements in Materials and Manufacturing Engineering, vol. 25, no. 2, pp. 99–102, 2007. View at Google Scholar
  12. N. D. Rao, R. R. Srikant, and C. S. Rao, “Influence of emulsifier content on properties and durability of cutting fluids,” Journal of the Brazilian Society of Mechanical Science and Engineering, vol. 24, no. 4, pp. 396–400, 2007. View at Google Scholar
  13. A. D. Jayal and A. K. Balaji, “Effects of cutting fluid application on tool wear in machining: interactions with tool-coatings and tool surface features,” Wear, vol. 267, no. 9-10, pp. 1723–1730, 2009. View at Publisher · View at Google Scholar · View at Scopus
  14. R. V. Rao and B. K. Patel, “Decision making in the manufacturing environment using an improved PROMETHEE method,” International Journal of Production Research, vol. 48, no. 16, pp. 4665–4682, 2010. View at Publisher · View at Google Scholar · View at Zentralblatt MATH · View at Scopus
  15. D. Fratila and C. Caizar, “Application of Taguchi method to selection of optimal lubrication and cutting conditions in face milling of AlMg3,” Journal of Cleaner Production, vol. 19, no. 6-7, pp. 640–645, 2011. View at Publisher · View at Google Scholar · View at Scopus
  16. J. Meciarova and M. Stanovsky, “Cutting fluids evaluation based on occupational health and environmental hazards,” Engineering for Rural Development, vol. 10, pp. 418–422, 2011. View at Google Scholar
  17. L. Abhang and M. Hameedullah, “Selection of lubricant using combined multiple attribute decision-making method,” Advances in Production Engineering & Management, vol. 7, no. 1, pp. 39–50, 2012. View at Publisher · View at Google Scholar
  18. Jagadish and A. Ray, “Cutting fluid selection for sustainable design for manufacturing: an integrated theory,” Procedia Materials Science, vol. 6, pp. 450–459, 2014. View at Publisher · View at Google Scholar
  19. T. Deshamukhya and A. Ray, “Selection of cutting fluid for green manufacturing using analytical hierarchy process (AHP): a case study,” International Journal of Mechanical Engineering and Robotics Research, vol. 3, no. 1, pp. 173–182, 2014. View at Google Scholar
  20. Jagadish and A. Ray, “Green cutting fluid selection using MOOSRA method,” International Journal of Research in Engineering and Technology, vol. 3, no. 15, pp. 559–563, 2014. View at Publisher · View at Google Scholar
  21. E. S. R. R. Kumar and J. S. R. Prasad, “A novel approach of obtaining theoritical values in selection of cutting fluid attributes,” IOSR Journal of Mathematics, vol. 10, no. 5, pp. 1–4, 2014. View at Publisher · View at Google Scholar
  22. S. Chakraborty and E. K. Zavadskas, “Applications of WASPAS method in manufacturing decision making,” Informatica, vol. 25, no. 1, pp. 1–20, 2014. View at Google Scholar · View at Scopus
  23. V. V. Tiwari and A. Sharma, “MADM for selection of vegetable based cutting fluids by SAW method and WPM method,” International Journal of Research in Technology and Management, vol. 1, no. 1, pp. 16–27, 2015. View at Google Scholar
  24. K. Prasad, E. K. Zavadskas, and S. Chakraborty, “A software prototype for material handling equipment selection for construction sites,” Automation in Construction, vol. 57, pp. 120–131, 2015. View at Publisher · View at Google Scholar
  25. Production Technology—HMT Bangalore, Tata McGraw-Hill Publishing Company Limited, New Delhi, India, 1980.