Table of Contents Author Guidelines Submit a Manuscript
Advances in Tribology
Volume 2017, Article ID 2509879, 12 pages
https://doi.org/10.1155/2017/2509879
Research Article

Dynamic Characterization of Rubber O-Rings: Squeeze and Size Effects

1Division of Production Engineering, Machine Design and Automation, KU Leuven, Leuven, Belgium
2Department of Mechanical and Aerospace Engineering, Politecnico di Torino, Torino, Italy
3Leuven Air Bearings, KU Leuven, Leuven, Belgium

Correspondence should be addressed to Federico Colombo; ti.otilop@obmoloc.ociredef

Received 2 May 2017; Accepted 13 June 2017; Published 12 July 2017

Academic Editor: Michel Fillon

Copyright © 2017 Farid Al-Bender et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Citations to this Article [5 citations]

The following is the list of published articles that have cited the current article.

  • Tadayoshi Shoyama, and Koji Fujimoto, “Analytical Prediction of Dynamic Properties of O-Ring with Hydrostatic Pressure Distribution,” Journal of Applied Mechanics, Transactions ASME, vol. 85, no. 12, 2018. View at Publisher · View at Google Scholar
  • Clay S. Norrbin, and Dara W. Childs, “Predictions for non-contacting mechanical face seal vibration with external excitation from pump vibration - Part I: Flexibly mounted stator,” Proceedings of the ASME Turbo Expo, vol. 7, 2018. View at Publisher · View at Google Scholar
  • Hussain F. Alsaif, Houssam Antar, Ashmita Tandon, Guohua Ma, James McCusker, Demitri Baker, and Jack Manning, “A small-scale robotic spill detection and cleaning method,” ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE), vol. 13, 2018. View at Publisher · View at Google Scholar
  • Tadayoshi Shoyama, and Koji Fujimoto, “Calculation of high-frequency dynamic properties of squeezed O-ring for bearing support,” Mechanical Engineering Journal, 2018. View at Publisher · View at Google Scholar
  • Philipp Bättig, and Jürg Schiffmann, “Data-Driven Model for the Dynamic Characteristics of O-Rings for Gas Bearing Supported Rotors,” Journal of Applied Mechanics, vol. 86, no. 8, pp. 081003, 2019. View at Publisher · View at Google Scholar