Table of Contents Author Guidelines Submit a Manuscript

Citations to this Journal [556 citations: 1–100 of 532 articles]

Articles published in Advances in Tribology have been cited 556 times. The following is a list of the 532 articles that have cited the articles published in Advances in Tribology.

  • Chiara Bedon, and Massimo Fragiacomo, “Numerical Investigation of Timber Log-Haus Walls with Steel Dovetail Reinforcements under In-Plane Seismic Loads,” Advances in Civil Engineering, vol. 2018, pp. 1–12, 2018. View at Publisher · View at Google Scholar
  • Young Woo Seo, Andreas Rosenkranz, and Frank E. Talke, “Molecular Dynamics Study of Lubricant Depletion by Pulsed Laser Heating,” Applied Surface Science, 2018. View at Publisher · View at Google Scholar
  • Praveen Chapala, Swati Ghosh Acharyya, S M Shariff, and Amit Bhattacharjee, “ Studying the effect of composition on the in vitro wear behavior and elastic modulus of titanium-niobium-based alloys for biomedical implants ,” Biomedical Physics & Engineering Express, vol. 4, no. 2, pp. 027003, 2018. View at Publisher · View at Google Scholar
  • M.T. Kesim, H. Yu, Y. Sun, M. Aindow, and S.P. Alpay, “Corrosion, oxidation, erosion and performance of Ag/W-based circuit breaker contacts: A review,” Corrosion Science, 2018. View at Publisher · View at Google Scholar
  • W.W.F. Chong, J.-H. Ng, S. Rajoo, and C.T. Chong, “Passenger transportation sector gasoline consumption due to friction in Southeast Asian countries,” Energy Conversion and Management, vol. 158, pp. 346–358, 2018. View at Publisher · View at Google Scholar
  • M. Asnida, S. Hisham, N.W. Awang, A.K. Amirruddin, M.M. Noor, K. Kadirgama, D. Ramasamy, G. Najafi, and F. Tarlochan, “Copper (II) oxide nanoparticles as additve in engine oil to increase the durability of piston-liner contact,” Fuel, vol. 212, pp. 656–667, 2018. View at Publisher · View at Google Scholar
  • Hiroshi Tani, Renguo Lu, Shinji Koganezawa, and Norio Tagawa, “Adsorption Properties of an Ultrathin PFPE Lubricant With Ionic End-Groups for DLC Surfaces,” IEEE Transactions on Magnetics, vol. 54, no. 2, pp. 1–6, 2018. View at Publisher · View at Google Scholar
  • K.R. Kadam, and S.S. Banwait, “Performance characteristics of two-axial groove journal bearing for different groove angles,” Industrial Lubrication and Tribology, vol. 70, no. 2, pp. 432–443, 2018. View at Publisher · View at Google Scholar
  • Arian Afrabandpey, and Hashem Ghariblu, “Performance Evaluation of Ball CVT and Comparison with Half Toroidal CVT,” International Journal of Automotive Technology, vol. 19, no. 3, pp. 547–557, 2018. View at Publisher · View at Google Scholar
  • Kyungmok Kim, “Fretting studies on electroplated brass contacts,” International Journal of Mechanical Sciences, 2018. View at Publisher · View at Google Scholar
  • J.K. Kaleicheva, and Z. Karaguiozova, “Improvement of the Wear Resistance of Ferrous Alloys by Electroless Plating of Nickel,” IOP Conference Series: Materials Science and Engineering, vol. 295, pp. 012036, 2018. View at Publisher · View at Google Scholar
  • Adewale Oladapo Adegbenjo, Babatunde Abiodun Obadele, and Peter Apata Olubambi, “Densification, hardness and tribological characteristics of MWCNTs reinforced Ti6Al4V compacts consolidated by spark plasma sintering,” Journal of Alloys and Compounds, 2018. View at Publisher · View at Google Scholar
  • Numan Salah, Ahmed Alshahrie, Najlaa D. Alharbi, M. Sh. Abdel-wahab, and Zishan H. Khan, “Nano and micro structures produced from carbon rich fly ash as effective lubricant additives for 150SN base oil,” Journal of Materials Research and Technology, 2018. View at Publisher · View at Google Scholar
  • Craig L. Sikora, Maria F. Alfaro, Judy Chia-Chun Yuan, Valentim A. Barao, Cortino Sukotjo, and Mathew T. Mathew, “Wear and Corrosion Interactions at the Titanium/Zirconia Interface: Dental Implant Application,” Journal of Prosthodontics, 2018. View at Publisher · View at Google Scholar
  • Andreas Ziegltrum, Thomas Lohner, and Karsten Stahl, “TEHL Simulation on the Influence of Lubricants on the Frictional Losses of DLC Coated Gears,” Lubricants, vol. 6, no. 1, pp. 17, 2018. View at Publisher · View at Google Scholar
  • Michael Pusterhofer, Philipp Bergmann, Florian Summer, Florian Grün, and Clemens Brand, “A Novel Approach for Modeling Surface Effects in Hydrodynamic Lubrication,” Lubricants, vol. 6, no. 1, pp. 27, 2018. View at Publisher · View at Google Scholar
  • Ilker Bayer, “Advances in Tribology of Lubricin and Lubricin-Like Synthetic Polymer Nanostructures,” Lubricants, vol. 6, no. 2, pp. 30, 2018. View at Publisher · View at Google Scholar
  • Sukhendu Jana, Sayan Das, Debasish De, Anup Mondal, and Utpal Gangopadhyay, “Diamond-like nanocomposite: a novel promising carbon based thin film as antireflection and passivation coating for silicon solar cell,” Materials Research Express, vol. 5, no. 2, pp. 025601, 2018. View at Publisher · View at Google Scholar
  • Shuhaib Mushtaq, and M F Wani, “High-temperature friction and wear studies of Fe-Cu-Sn alloy with graphite as solid lubricant under dry sliding conditions,” Materials Research Express, vol. 5, no. 2, pp. 026504, 2018. View at Publisher · View at Google Scholar
  • Arunkumar M Bongale, Satish Kumar, T S Sachit, and Priya Jadhav, “ Wear rate optimization of Al/SiC np /e-glass fibre hybrid metal matrix composites using Taguchi method and genetic algorithm and development of wear model using artificial neural networks ,” Materials Research Express, vol. 5, no. 3, pp. 035005, 2018. View at Publisher · View at Google Scholar
  • Mohd Bilal Naim Shaikh, Sajjad Arif, and M Arif Siddiqui, “Fabrication and characterization of aluminium hybrid composites reinforced with fly ash and silicon carbide through powder metallurgy,” Materials Research Express, vol. 5, no. 4, pp. 046506, 2018. View at Publisher · View at Google Scholar
  • D. Amrishraj, and T. Senthilvelan, “Dry Sliding wear behavior of ABS Composites reinforced with nano Zirconia and PTFE,” Materials Today: Proceedings, vol. 5, no. 2, pp. 7068–7077, 2018. View at Publisher · View at Google Scholar
  • Tadayoshi Shoyama, and Koji Fujimoto, “Calculation of high-frequency dynamic properties of squeezed O-ring for bearing support,” Mechanical Engineering Journal, 2018. View at Publisher · View at Google Scholar
  • Florian Verbelen, Stijn Derammelaere, Peter Sergeant, and Kurt Stockman, “A comparison of the full and half toroidal continuously variable transmissions in terms of dynamics of ratio variation and efficiency,” Mechanism and Machine Theory, vol. 121, pp. 299–316, 2018. View at Publisher · View at Google Scholar
  • Hiroshi Tani, Yuki Uesaraie, Renguo Lu, Shinji Koganezawa, and Norio Tagawa, “Smear growth on head slider surface from siloxane outgas on heat assisted magnetic recording,” Microsystem Technologies, 2018. View at Publisher · View at Google Scholar
  • Divya Rani Bijukumar, Abhijith Segu, Júlio Cesar Matias de Souza, XueJun Li, Mark Barba, Louis Mercuri, Joshua Jacobs, and Mathew Thoppil Mathew, “Systemic and Local Toxicity of Metal Particles Released from Hip Prostheses: A Review of Experimental Approaches,” Nanomedicine: Nanotechnology, Biology and Medicine, 2018. View at Publisher · View at Google Scholar
  • Sukumar Rajauria, Oscar Ruiz, Sripathi V. Canchi, Erhard Schreck, and Qing Dai, “Electrostatically Tunable Adhesion in a High Speed Sliding Interface,” Physical Review Letters, vol. 120, no. 2, 2018. View at Publisher · View at Google Scholar
  • Jakob Moder, Florian Grün, Florian Summer, Matthias Kohlhauser, and Manuel Wohlfahrt, “Application of high performance composite polymers with steel counterparts in dry rolling/sliding contacts,” Polymer Testing, 2018. View at Publisher · View at Google Scholar
  • T. Falke, K.M. de Payrebrune, S. Kirchhof, L. Kühnel, R. Kühnel, T. Mütze, and M. Kröger, “An alternative DEM parameter identification procedure based on experimental investigation: A case study of a ring shear cell,” Powder Technology, 2018. View at Publisher · View at Google Scholar
  • Stefano d’Ambrosio, and Roberto Vitolo, “Potential impact of active tire pressure management on fuel consumption reduction in passenger vehicles,” Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, pp. 095440701875677, 2018. View at Publisher · View at Google Scholar
  • Qianlei Peng, Chi Zhou, Liangjin Gui, and Zijie Fan, “Investigation of the lubrication system in a vehicle axle: Numerical model and experimental validation,” Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, pp. 095440701876612, 2018. View at Publisher · View at Google Scholar
  • Dudul Das, Pankaj Kalita, and Omkar Roy, “Flat plate hybrid photovoltaic- thermal (PV/T) system: A review on design and development,” Renewable and Sustainable Energy Reviews, vol. 84, pp. 111–130, 2018. View at Publisher · View at Google Scholar
  • Youfeng Zhang, Yunje Oh, Douglas Stauffer, and Andreas A. Polycarpou, “A microelectromechanical systems (MEMS) force-displacement transducer for sub-5 nm nanoindentation and adhesion measurements,” Review of Scientific Instruments, vol. 89, no. 4, pp. 045109, 2018. View at Publisher · View at Google Scholar
  • Hui-Min Shen, Liang Hu, and Xin Fu, “Integrated Giant Magnetoresistance Technology for Approachable Weak Biomagnetic Signal Detections,” Sensors, vol. 18, no. 1, pp. 148, 2018. View at Publisher · View at Google Scholar
  • He Li, Qiquan Quan, Zongquan Deng, Deen Bai, and Yinchao Wang, “Design and experimental study on an ultrasonic bearing with bidirectional carrying capacity,” Sensors and Actuators A: Physical, vol. 273, pp. 58–66, 2018. View at Publisher · View at Google Scholar
  • Daniel Bernoulli, Shan Cecilia Cao, Jian Lu, and Ming Dao, “Enhanced repeated frictional sliding properties in 304 stainless steel with a gradient nanostructured surface,” Surface and Coatings Technology, vol. 339, pp. 14–19, 2018. View at Publisher · View at Google Scholar
  • Vijaya Bhaskar Kurapati, Ravindra Kommineni, and Srinivasan Sundarrajan, “Statistical Analysis and Mathematical Modeling of Dry Sliding Wear Parameters of 2024 Aluminium Hybrid Composites Reinforced with Fly Ash and SiC Particles,” Transactions of the Indian Institute of Metals, 2018. View at Publisher · View at Google Scholar
  • S. R. Mishra, M. Barik, and G. C. Dash, “An analysis of hydrodynamic ferrofluid lubrication of an inclined rough slider bearing,” Tribology - Materials, Surfaces & Interfaces, pp. 1–10, 2018. View at Publisher · View at Google Scholar
  • V. Srinivas, Ch. Kodanda Rama Rao, and N. Mohan Rao, “Lubricating and physico-chemical properties of CI- 4 plus engine oil dispersed with surface modified multi-walled carbon nanotubes,” Tribology - Materials, Surfaces & Interfaces, pp. 1–8, 2018. View at Publisher · View at Google Scholar
  • Sungwook Kwon, Jung-Ju Lee, Jung-A. Lee, and Jeong-Joo Kim, “Effect of different reinforcement materials on the formation of secondary plateaus and friction properties in friction materials for automobiles,” Tribology International, vol. 120, pp. 70–79, 2018. View at Publisher · View at Google Scholar
  • R. Ghasemi, L. Elmquist, E. Ghassemali, K. Salomonsson, and A.E.W. Jarfors, “Abrasion resistance of lamellar graphite iron: Interaction between microstructure and abrasive particles,” Tribology International, 2018. View at Publisher · View at Google Scholar
  • İlyas Hacisalihoğlu, Fatih Yildiz, and Ayhan Çelik, “Tribocorrosion behavior of plasma nitrided Hardox steels in NaCl solution,” Tribology International, 2018. View at Publisher · View at Google Scholar
  • Jakob Moder, Florian Grün, Florian Summer, Thomas Gasperlmair, and Martin Andritschky, “Effect of temperature on wear and tribofilm formation in highly loaded DLC-steel line contacts,” Tribology International, 2018. View at Publisher · View at Google Scholar
  • Philipp Bergmann, Florian Grün, István Gódor, Gabriel Stadler, and Verena Maier-Kiener, “On the modelling of mixed lubrication of conformal contacts,” Tribology International, 2018. View at Publisher · View at Google Scholar
  • J.A. Heredia-Cancino, Maziar Ramezani, and M.E. Álvarez-Ramos, “Effect of degradation on tribological performance of engine lubricants at elevated temperatures,” Tribology International, 2018. View at Publisher · View at Google Scholar
  • Soroush Sarabi, and David B. Bogy, “Effect of Viscoelasticity on Lubricant Behavior Under Heat-Assisted Magnetic Recording Conditions,” Tribology Letters, vol. 66, no. 1, 2018. View at Publisher · View at Google Scholar
  • M. Scaraggi, J. Angerhausen, L. Dorogin, H. Murrenhoff, and B.N.J. Persson, “Influence of anisotropic surface roughness on lubricated rubber friction: Extended theory and an application to hydraulic seals,” Wear, 2018. View at Publisher · View at Google Scholar
  • Mamoun Fellah, Linda Aissani, Mohammed Abdul Samad, Alain Iost, Touhami Mohamed Zine, Alex Montagne, and Corinne Nouveau, “Effect of Replacing Vanadium by Niobium and Iron on the Tribological Behavior of HIPed Titanium Alloys,” Acta Metallurgica Sinica (English Letters), 2017. View at Publisher · View at Google Scholar
  • Marián Kučera, and Zdeněk Aleš, “Morphology Analysis of Friction Particles Generated in Tractor Transmission Oils,” Acta Technologica Agriculturae, vol. 20, no. 3, pp. 57–62, 2017. View at Publisher · View at Google Scholar
  • Rachel Hernandez, Harpreet Singh, Sherri Messimer, and Albert Patterson, “Design and Performance of Modular 3-D Printed Solid-Propellant Rocket Airframes,” Aerospace, vol. 4, no. 2, pp. 17, 2017. View at Publisher · View at Google Scholar
  • Jie J. Yao, Eric A. Lewallen, William H. Trousdale, Wei Xu, Roman Thaler, Christopher G. Salib, Nicolas Reina, Matthew P. Abdel, David G. Lewallen, and Andre J. van Wijnen, “Local Cellular Responses to Titanium Dioxide from Orthopedic Implants,” BioResearch Open Access, vol. 6, no. 1, pp. 94–103, 2017. View at Publisher · View at Google Scholar
  • R. Bertolini, S. Bruschi, A. Ghiotti, L. Pezzato, and M. Dabalà, “Influence of the machining cooling strategies on the dental tribocorrosion behaviour of wrought and additive manufactured Ti6Al4V,” Biotribology, 2017. View at Publisher · View at Google Scholar
  • N. Espallargas, A. Fischer, A. Igual Muñoz, S. Mischler, and M.A. Wimmer, “In-situ Generated Tribomaterial in Metal/Metal Contacts: Current understanding and future implications for implants,” Biotribology, 2017. View at Publisher · View at Google Scholar
  • Hirofumi Kondo, Kouki Hatsuda, Nobuo Tano, Pankaj Baghel, and Takeshi Noguchi, “Thin Film Properties of Ammonium Sulfonate Ionic Liquids Having a Long Alkyl Chain,” Bulletin of the Chemical Society of Japan, vol. 90, no. 2, pp. 188–194, 2017. View at Publisher · View at Google Scholar
  • K. Mori, P.F. Bariani, B.-A. Behrens, A. Brosius, S. Bruschi, T. Maeno, M. Merklein, and J. Yanagimoto, “Hot stamping of ultra-high strength steel parts,” CIRP Annals - Manufacturing Technology, 2017. View at Publisher · View at Google Scholar
  • Noor Ayuma Mat Tahir, Mohd Fadzli Bin Abdollah, Noreffendy Tamaldin, Hilmi Amiruddin, and Mohd Rody Bin Mohamad Zin, “A brief review on the wear mechanisms and interfaces of carbon based materials,” Composite Interfaces, pp. 1–23, 2017. View at Publisher · View at Google Scholar
  • Bettina Suhr, and Klaus Six, “Friction phenomena and their impact on the shear behaviour of granular material,” Computational Particle Mechanics, vol. 4, no. 1, pp. 23–34, 2017. View at Publisher · View at Google Scholar
  • Shoufan Cao, Anna Igual Muñoz, and Stefano Mischler, “Rationalizing the In Vivo Degradation of Metal-on-Metal Artificial Hip Joints Using Tribocorrosion Concepts,” Corrosion, vol. 73, no. 12, 2017. View at Publisher · View at Google Scholar
  • Numan Salah, Ahmed Alshahrie, M.Sh. Abdel-wahab, Najlaa D. Alharbi, and Zishan H. Khan, “Carbon nanotubes of oil fly ash integrated with ultrathin CuO nanosheets as effective lubricant additives,” Diamond and Related Materials, 2017. View at Publisher · View at Google Scholar
  • Paras Ram, Anil Kumar, Oluwole Daniel Makinde, Punit Kumar, and Vimal Kumar Joshi, “Performance Analysis of Magnetite Nano-Suspension Based Porous Slider Bearing with Varying Inclination and Slip Parameter,” Diffusion Foundations, vol. 11, pp. 11–21, 2017. View at Publisher · View at Google Scholar
  • Rajeev Kumar Sharma, Ambreen Nisar, and Kantesh Balani, “Mechanics of ZnO morphological dependence on wear resistance of ultra high molecular weigh polyethylene,” European Journal of Mechanics - A/Solids, vol. 65, pp. 149–158, 2017. View at Publisher · View at Google Scholar
  • Jizu Lv, Chengzhi Hu, Ke Zeng, Minli Bai, Shengnan Chang, and Dongdong Gao, “Experimental investigation of free single jet impingement using SiO2-water nanofluid,” Experimental Thermal and Fluid Science, 2017. View at Publisher · View at Google Scholar
  • Enzo Maier, Andreas Ziegltrum, Thomas Lohner, and Karsten Stahl, “Characterization of TEHL contacts of thermoplastic gears,” Forschung im Ingenieurwesen, 2017. View at Publisher · View at Google Scholar
  • F. Concli, “Low-loss gears precision planetary gearboxes: reduction of the load dependent power losses and efficiency estimation through a hybrid analytical-numerical optimization tool,” Forschung im Ingenieurwesen, 2017. View at Publisher · View at Google Scholar
  • Jose Daniel Biasoli De Mello, Cristiano Binder, Gisele Hammes, Roberto Binder, and Aloisio Nelmo Klein, “Tribological behaviour of sintered iron based self-lubricating composites,” Friction, vol. 5, no. 3, pp. 285–307, 2017. View at Publisher · View at Google Scholar
  • Ch. Amanulla, Nagendra, and Suryanarayana Reddy, “Thermal and momentum slip effects on hydromagnetic convection flow of a williamson fluid past a vertical truncated cone,” Frontiers in Heat and Mass Transfer, vol. 9, 2017. View at Publisher · View at Google Scholar
  • Xue Teng, Lefei Wen, Yunxia Lv, Wenge Tang, Xiaogang Zhao, and Chunhai Chen, “Effects of potassium titanate whisker and glass fiber on tribological and mechanical properties of PTFE/PEEK blend,” High Performance Polymers, pp. 095400831772344, 2017. View at Publisher · View at Google Scholar
  • Shaomin Xiong, Robert Smith, Erhard Schreck, and Sripathi Canchi, “Compensation for the Write Start Transient in Heat-Assisted Magnetic Recording,” IEEE Magnetics Letters, vol. 8, pp. 1–4, 2017. View at Publisher · View at Google Scholar
  • Sharin Ab Ghani, Nor Asiah Muhamad, Hidayat Zainuddin, Zulkarnain Ahmad Noorden, and Noraiham Mohamad, “Application of response surface methodology for optimizing the oxidative stability of natural ester oil using mixed antioxidants,” IEEE Transactions on Dielectrics and Electrical Insulation, vol. 24, no. 2, pp. 974–983, 2017. View at Publisher · View at Google Scholar
  • Anurup Datta, and Xianfan Xu, “Infrared Near-Field Transducer for Heat-Assisted Magnetic Recording,” IEEE Transactions on Magnetics, vol. 53, no. 12, pp. 1–5, 2017. View at Publisher · View at Google Scholar
  • Fazuruddin Syed, Sreekanth S., and Raju G.S.S., “Numerical Study of Magneto - Convective Tangent Hyperbolic Fluid In Over A Circular Cylinder with Suction/Blowing,” i-manager’s Journal on Mathematics, vol. 6, no. 3, pp. 45, 2017. View at Publisher · View at Google Scholar
  • Ashafie Mustafa, Mohd Fadzli Bin Abdollah, Hilmi Amiruddin, Fairuz Fazillah Shuhimi, and Noryani Muhammad, “Optimization of friction properties of kenaf polymer composite as an alternative friction material,” Industrial Lubrication and Tribology, vol. 69, no. 2, pp. 259–266, 2017. View at Publisher · View at Google Scholar
  • Abdul Munir Hidayat Syah Lubis, Bambang Ariwahjoedi, and Mustafar Sudin, “XPS characterization of tribo-layer formation on the steel lubricated with crude and epoxidized jatropha oil under boundary lubrication,” Industrial Lubrication and Tribology, vol. 69, no. 3, pp. 371–377, 2017. View at Publisher · View at Google Scholar
  • H. Siddhi Jailani, A. Rajadurai, B. Mohan, and T. Sornakumar, “Sliding wear behaviour of Al-Si alloy–fly ash composites produced by powder metallurgy technique,” Industrial Lubrication and Tribology, vol. 69, no. 2, pp. 241–247, 2017. View at Publisher · View at Google Scholar
  • Kai Feng, Minghui Shi, Tao Gong, Yuanyuan Liu, and Jie Zhu, “A novel squeeze-film air bearing with flexure pivot-tilting pads: Numerical analysis and measurement,” International Journal of Mechanical Sciences, 2017. View at Publisher · View at Google Scholar
  • Samy Yousef, Shady Ali, M. Ali, D. Christova, Y. Hassan, D. Samir, and B. Kamel, “Synthesis and characterization of CNTs/POM nanocomposite acetabular hip cup,” International Journal of Polymeric Materials and Polymeric Biomaterials, 2017. View at Publisher · View at Google Scholar
  • Gustavo J. Molina, Fnu Aktaruzzaman, Valentin Soloiu, and Mosfequr Rahman, “Design and Testing of a Jet-Impingement Instrument to Study Surface-Modification Effects by Nanofluids,” International Journal of Surface Engineering and Interdisciplinary Materials Science, vol. 5, no. 2, pp. 43–61, 2017. View at Publisher · View at Google Scholar
  • Mohd Fadzli Bin Abdollah, Hilmi Amiruddin, Muhammad Ilman Hakimi Chua Abdullah, Noreffendy Tamaldin, and Nur Rashid Mat Nuri, “Tribological effects of nano-based engine oil diluted with biodiesel fuel,” International Journal of Surface Science and Engineering, vol. 11, no. 1, pp. 12–22, 2017. View at Publisher · View at Google Scholar
  • Yangyi Xiao, Wankai Shi, and Jing Luo, “Mechanical responses of coated solids in elastohydrodynamically lubricated line contacts,” International Journal of Surface Science and Engineering, vol. 11, no. 5, pp. 450–487, 2017. View at Publisher · View at Google Scholar
  • Emiel van Trijffel, Michel de Maeseneer, Luca Buzzatti, Rob A.B. Oostendorp, Aldo Scafoglieri, and Erik Cattrysse, “Are changes in synovial fluid volume or distribution a determinant of biomechanical effects of passive joint movements?,” International Musculoskeletal Medicine, pp. 1–7, 2017. View at Publisher · View at Google Scholar
  • E D?n?il?, and L Benea, “ The Effect of Normal Force on Tribocorrosion Behaviour of Ti-10Zr Alloy and Porous TiO 2 -ZrO 2 Thin Film Electrochemical Formed ,” IOP Conference Series: Materials Science and Engineering, vol. 209, pp. 012015, 2017. View at Publisher · View at Google Scholar
  • Jimit R. Patel, and G. M. Deheri, “A Comparison of Magnetic Fluid Flow Models on the Behavior of a Ferrofluid Squeeze Film in Curved Rough Porous Circular Plates Considering Slip Velocity,” Iranian Journal of Science and Technology, Transactions A: Science, 2017. View at Publisher · View at Google Scholar
  • Mohammad Asaduzzaman Chowdhury, Uttam Kumar Debnath, Dewan Muhammad Nuruzzaman, and Monirul Islam, “Erosion of Mild Steel for Engineering Design and Applications,” Journal of Bio- and Tribo-Corrosion, vol. 3, no. 3, 2017. View at Publisher · View at Google Scholar
  • Hsin-Yi Lin, Wen-Chi Tsai, and Shih-Hsing Chang, “Collagen-PVA aligned nanofiber on collagen sponge as bi-layered scaffold for surface cartilage repair,” Journal of Biomaterials Science, Polymer Edition, vol. 28, no. 7, pp. 664–678, 2017. View at Publisher · View at Google Scholar
  • T. A. Dantas, M. M. Costa, G. Miranda, F. S. Silva, C. S. Abreu, and J. R. Gomes, “Effect of HAp and β-TCP incorporation on the tribological response of Ti6Al4V biocomposites for implant parts,” Journal of Biomedical Materials Research Part B: Applied Biomaterials, 2017. View at Publisher · View at Google Scholar
  • R. Maria Deepika, “Mechanical spacing to investigation of slider dynamics in the slider-lubricant contact management,” Journal of Engineering and Applied Sciences, vol. 12, no. 2, pp. 6271–6273, 2017. View at Publisher · View at Google Scholar
  • Omar Ahmed Mohamed, Syed Hasan Masood, Jahar Lal Bhowmik, and Anthony E. Somers, “Investigation on the tribological behavior and wear mechanism of parts processed by fused deposition additive manufacturing process,” Journal of Manufacturing Processes, vol. 29, pp. 149–159, 2017. View at Publisher · View at Google Scholar
  • Kaline Pagnan Furlan, Priscila da Costa Gonçalves, Deise Rebelo Consoni, Matheus Vinícius Gouvêa Dias, Gabriel Araújo de Lima, José Daniel Biasoli de Mello, and Aloisio Nelmo Klein, “Metallurgical Aspects of Self-lubricating Composites Containing Graphite and MoS2,” Journal of Materials Engineering and Performance, 2017. View at Publisher · View at Google Scholar
  • S. Nallusamy, and A. Karthikeyan, “Synthesis and Wear Characterization of Reinforced Glass Fiber Polymer Composites with Epoxy Resin Using Granite Powder,” Journal of Nano Research, vol. 49, pp. 1–9, 2017. View at Publisher · View at Google Scholar
  • Debasish Kumar Saha, and Pranab Ghosh, “Almond Oil as Potential Biodegradable Lube Oil Additive: A Green Alternative,” Journal of Polymers and the Environment, 2017. View at Publisher · View at Google Scholar
  • Madalli, Ramesh B. Kudenatti, and Basti, “Non-Newtonian fluid model for pressure-driven flow between porous and rough surfaces in journal bearing,” Journal of Porous Media, vol. 20, no. 10, pp. 881–898, 2017. View at Publisher · View at Google Scholar
  • Rajesh Shanmugavel, Purusothaman Mokkandi, Manivannan Jayamani, N. Rajini, M. Uthayakumar, and S. Thirumalaikumaran, “Mechanical and Machinability characteristics of Al–NiTi composites reinforced with SiC particulates,” Journal of the Australian Ceramic Society, 2017. View at Publisher · View at Google Scholar
  • M. Ayyanar Raja, V. Manikandan, P. Amuthakkannan, S. Rajesh, and I. Balasubramanian, “Wear resistance of basalt particulate-reinforced stir-cast Al7075 metal matrix composites,” Journal of the Australian Ceramic Society, 2017. View at Publisher · View at Google Scholar
  • Dan Moldovanu, and Florin Mariasiu, “Influences of chemical characteristics and nanoadditive participation on raw vegetable oils’ tribological properties,” Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2017. View at Publisher · View at Google Scholar
  • Sivasankara Raju Rallabandi, and Gunji Srinivasa Rao, “Assessment of Tribological Performance of Al-Coconut Shell Ash Particulate—MMCs using Grey-Fuzzy Approach,” Journal of The Institution of Engineers (India): Series C, 2017. View at Publisher · View at Google Scholar
  • F. Bartolomeu, M. Sampaio, O. Carvalho, E. Pinto, N. Alves, J.R. Gomes, F.S. Silva, and G. Miranda, “Tribological behavior of Ti6Al4V cellular structures produced by Selective Laser Melting,” Journal of the Mechanical Behavior of Biomedical Materials, vol. 69, pp. 128–134, 2017. View at Publisher · View at Google Scholar
  • J.I. Silva, A.C. Alves, A.M. Pinto, and F. Toptan, “Corrosion and tribocorrosion behavior of Ti?TiB?TiN x in-situ hybrid composite synthesized by reactive hot pressing,” Journal of the Mechanical Behavior of Biomedical Materials, 2017. View at Publisher · View at Google Scholar
  • Jungkyu Lee, Youfeng Zhang, Robert M. Crone, Narayanan Ramakrishnan, and Andreas A. Polycarpou, “Wear modeling of nanometer thick protective coatings,” Journal of Tribology, vol. 139, no. 2, 2017. View at Publisher · View at Google Scholar
  • Pankaj Khatak, and Garg, “Performance analysis of capillary compensated hybrid journal bearing by considering combined influence of thermal effects and micropolar lubricant,” Journal of Tribology, vol. 139, no. 1, 2017. View at Publisher · View at Google Scholar
  • Octrue, Neurouth, Changenet, Ville, and Tinguy, “Experimental Investigations to Use Splash Lubrication for High-Speed Gears,” Journal of Tribology, vol. 139, no. 6, 2017. View at Publisher · View at Google Scholar