Abstract

A V-shaped ligand Bis(2-benzimidazolymethyl)amine (bba) and its nickel(II) picrate (pic) complex, with composition [Ni(bba)2](pic)2·3MeOH, have been synthesized and characterized on the basis of elemental analyses, molar conductivities, IR spectra, and UV/vis measurements. In the complex, the Ni(II) ion is six-coordinated with a N2O4 ligand set, resulting in a distorted octahedron coordination geometry. In addition, the DNA-binding properties of the Ni(II) complex have been investigated by electronic absorption, fluorescence, and viscosity measurements. The experimental results suggest that the nickel(II) complex binds to DNA by partial intercalation binding mode.

1. Introduction

Binding studies of small molecules to DNA are very important in the development of DNA molecular probes and new therapeutic reagents [1]. Transition metal complexes have attracted considerable attention as catalytic systems for use in the oxidation of organic compounds [2], probes in electron-transfer reactions involving metalloproteins [3], and intercalators with DNA [4]. Numerous biological experiments have demonstrated that DNA is the primary intracellular target of anticancer drugs; interaction between small molecules and DNA can cause damage in cancer cells, blocking the division and resulting in cell death [57].

Since the benzimidazole unit is the key-building block for a variety of compounds which have crucial roles in the functions of biologically important molecules, there is a constant and growing interest over the past few years for the synthesis and biological studies of benzimidazole derivatives [810]. Since the characterization of urease as a nickel enzyme in 1975, the knowledge of the role of nickel in bioinorganic chemistry has been rapidly expanding [11]. The interaction of Ni(II) complexes with DNA appears to be mainly dependent on the structure of the ligand exhibiting intercalative behavior [1214].

In this context, we synthesized and characterized a novel Ni(II) complex. Moreover, we describe the interaction of the novel Ni(II) complex with DNA using electronic absorption and fluorescence spectroscopy and viscosity measurements.

2. Experimental

2.1. Materials and Methods

Calf thymus DNA (CT-DNA) and Ethidium bromide (EB) were purchased from Sigma Chemicals Co. (USA). All chemicals used were of analytical grade. All the experiments involving interaction of the ligand and the complexes with CT-DNA were carried out in doubly distilled water buffer containing 5 mM Tris and 50 mM NaCl and adjusted to pH 7.2 with hydrochloric acid. A solution of CT-DNA gave a ratio of UV absorbance at 260 and 280 nm of about 1.8–1.9, indicating that the CT-DNA was sufficiently free of protein [15]. The CT-DNA concentration per nucleotide was determined spectrophotometrically by employing an extinction coefficient of 6600 M−1 cm−1 at 260 nm [16].

Elemental analyses were performed on Carlo Erba 1106 elemental analyzer. The IR spectra were recorded in the 4000–400 cm−1 region with a Nicolet FT-VERTEX 70 spectrometer using KBr pellets. Electronic spectra were taken on a Lab-Tech UV Bluestar spectrophotometer. The fluorescence spectra were recorded on a 970-CRT spectrofluorophotometer. 1H­NMR spectra were obtained with a Mercury plus 400 MHz NMR spectrometer with TMS as internal standard and DMSO-d6 as solvent. Electrolytic conductance measurements were made with a DDS-11A type conductivity bridge using a 10−3 mol·L−1 solution in DMF at room temperature.

2.2. Electronic Absorption Spectra

Absorption titration experiment was performed with fixed concentrations of the complexes while gradually increasing concentration of CT-DNA. While measuring the absorption spectra, a proper amount of CT-DNA was added to both compound solution and the reference solution to eliminate the absorbance of CT-DNA itself. From the absorption titration data, the binding constant () was determined using [17] where is the concentration of DNA in base pairs, the apparent absorption coefficient, , , and correspond to /, the extinction coefficient of the free compounds and the extinction coefficient of the compound when fully bound to DNA, respectively. In plots of /() versus , is given by the ratio of slope to the intercept.

2.3. Fluorescence Spectra

EB emits intense fluoresence in the presence of CT-DNA due to its strong intercalation between the adjacent CT-DNA base pairs. It was previously reported that the enhanced fluorescence can be quenched by the addition of a second molecule [18]. The extent of fluorescence quenching of EB bound to CT-DNA can be used to determine the extent of binding between the second molecule and CT-DNA. The competitive binding experiments were carried out in the buffer by keeping = 1 and varying the concentrations of the compounds. The fluorescence spectra of EB were measured using an excitation wavelength of 520 nm and the emission range was set between 550 and 750 nm. The spectra were analyzed according to the classical Stern-Volmer equation [19], where and are the fluorescence intensities at 599 nm in the absence and presence of the quencher, respectively, is the linear Stern-Volmer quenching constant, [] is the concentration of the quencher.

2.4. Viscosity Measurements

Viscosity experiments were conducted on an Ubbelohde viscometer, immersed in a thermostated water-bath maintained at 25.0 ± 0.1°C. DNA samples approximately 200 bp in average length were prepared by sonicating in order to minimize complexities arising from DNA flexibility [20]. Titrations were performed for the compounds (3 mM), and each compound was introduced into the CT-DNA solution (50 μM) present in the viscometer. Data were presented as versus the ratio of the concentration of the compound to CT-DNA, where η is the viscosity of CT-DNA in the presence of the complex, and is the viscosity of CT-DNA alone. Viscosity values were calculated from the observed flow time of CT-DNA containing solutions corrected from the flow time of buffer alone (), .

2.5. Synthesis

The synthetic route for the ligand bba and its Ni(II) complex are shown in Scheme 1.

609796.sch.001
2.5.1. Bis(2-benzimidazolymethyl)amine (bba)

The ligand bba was synthesized according to the procedure reported by Berends and Stephan [21]. The infrared spectra and UV spectra of the bba were almost consistent with the literature. Elemental analysis: C16H15N5 (Mr = 277.33 g·mol−1) calcd: C 69.30; H 5.45; N 25.26%; found: C 69.35; H 5.47; N 25.16%. IR (KBr, pellet, cm−1): 1270s (), 1620s (), UV-vis (λ, nm): 277, 283, =  L·mol−1·cm−1, =  L·mol−1·cm−1. 1HNMR (DMSO-, 300 MHz) δ: 12.3 (1H, N-H); 7.144 (m, 4H); 7.5 (d, 4H); 4.0 (s, 4H). (DMF, 297 K): 1.29 S·cm2·mol−1.

2.5.2. [Ni(bba)2](pic)2·3MeOH

The ligand bba (0.4 mmol) and Ni(II) picrate (0.2 mmol) were dissolved in methanol (15 mL). A blue-green crystalline product which formed rapidly was filtered off, washed with methanol and absolute Et2O, and dried in vacuo. The dried precipitate was dissolved in DMF resulting in a blue-green solution that was allowed to evaporate at room temperature. Blue-green crystals suitable for X-ray diffraction studies were obtained after one week. C47H36N16Ni O17 (Mr = 1155.63 g·mol−1) calcd: C 48.85; H 3.14; N 19.39%; found: C 48.79; H 3.16; N 19.53%. IR (KBr, pellet, cm−1): 1272s (), 1434 (), 1487s (), UV-vis (λ, nm): 275, 280, 407, =  L·mol−1·cm−1, =  L·mol−1·cm−1, =  L·mol−1·cm−1. (DMF, 297 K): 128.5 S·cm2·mol−1.

2.6. Crystal Structure Determination

A suitable single crystal was mounted on a glass fiber and the intensity data were collected on a Bruker Smart CCD diffractometer with graphite-monochromated Mo Kα radiation (λ = 0.71073 Å) at 296 K. Data reduction and cell refinement were performed using the SMART and SAINT programs [22]. The structure was solved by direct methods and refined by full-matrix least squares against of data using SHELXTL software [23]. All H atoms were found in different electron maps and were subsequently refined in a riding-model approximation with C–H distances ranging from 0.95 to 0.99 Å. Basic crystal data, description of the diffraction experiment, and details of the structure refinement are given in Table 1.

3. Results and Discussion

The ligand bba and its Ni(II) complex are very stable in the air. They are remarkably soluble in polar solvents such as DMF, DMSO, and MeCN; slightly soluble in ethanol, methanol, ethyl acetate, and chloroform. The molar conductivities in DMF solution indicate that bba (1.29 S·cm2·mol−1) is nonelectrolyte compound and its Ni(II) complex is 1 : 2 electrolyte compound [24].

3.1. Spectral Characterization

In the bba ligand, a strong band is found at ca. 1270 cm−1 together along with a broad band at 1436 cm−1. By analogy with the assigned bands of imidazole, the former can be attributed to ν(C=N–C=C), while the latter can be attributed to ν(C=N) [2527]. One of them shift to the higher frequency by around 41 cm−1 in the complex, which implies direct coordination of all three imine nitrogen atoms to metal ions. This is the preferred nitrogen atom for coordination as found for other metal complexes with benzimidazoles [28]. Information regarding the possible bonding modes of the picrate and benzimidazole rings may also be obtained from the IR spectra, such as 709, 744, 1272, 1363, 1434, 1487, and 1633 cm−1 [29]. This fact agrees with the result determined by X-ray diffraction.

DMF solutions of ligand bba and its complexes show, as expected, almost identical UV spectra. The UV bands of bba (275, 280 nm) are only marginally blue shifted (1-2 nm) in the complexes, which is clear evidence of C=N coordination to the metal ions center. The absorption bands are assigned to π (imidazole) transitions. The bands of picrate (407 nm) are assigned toπ transitions.

3.2. Crystal Structure of [Ni(bba)2](pic)2·3MeOH

The molecular structure of the Ni(II) complex is shown in Figure 1, selected bond lengths and angles are summarized in Table 2. The Ni(II) atom is six-coordinate with a NiN4O2 environment. The bba ligand acts as a tridentate N-donor and O-donor. The coordination geometry of the Ni(II) may be best described as distorted octahedral with four coordination nitrogen atoms from an ideal equatorial plane. The maximum deviation (N9) from the plane containing these four N atoms is 0.764 Å. The bond average length between the Ni ion and the apical N atom (N1, N6) is 2.171 Å, which is about 0.097 Å longer than the bond average length between the Ni ion and four coordination N atoms from an equatorial plane. This geometry is assumed by the Ni(II) to relieve the steric crowding. Therefore, compared with a regular octahedron, it reflects a relatively distorted coordination octahedron around Ni(II).

3.3. Spectral Studies of the Interactions with DNA
3.3.1. Electronic Absorption Titration

Electronic absorption spectroscopy is universally employed to determine the binding characteristics of metal complexes with DNA [3032]. The absorption spectra of the Ni(II) complex in the absence and presence of CT-DNA are given in Figure 2. There are two well-resolved bands at about 272, 278 nm for the complex. The λ for the ligand increases only from 272 to 273, and for the complex from 278 to 279 nm, a slight red shift about 1 nm under identical experimental conditions. The slight red shift suggests that the Ni(II) complex interacts with DNA [33].

The binding constant for the complex has been determined from the plot of [DNA]/() versus [DNA] and was found to be  M−1. Compared with those of the so-called DNA-intercalative ruthenium complexes ( M−1) [34], the binding constants () of the Ni(II) complex suggest that the complex with DNA with an affinity is less than the classical intercalators.

3.3.2. Fluorescence Spectroscopic Studies

In general, measurement of the ability of a complex to affect the EB fluorescence intensity in the EB-DNA adduct allows determination of the affinity of the complex for DNA, whatever the binding mode may be. If a complex can replace EB from DNA-bound EB, the fluorescence of the solution will be quenched due to the fact that free EB molecules are readily quenched by the surrounding water molecules [35]. For all the compounds, no emission was observed either alone or in the presence of CT-DNA in the buffer. The fluorescence quenching of EB bound to CT-DNA by the Ni(II) complex is shown in Figure 3. The quenching of EB bound to CT-DNA by the Ni(II) complex is in good agreement with the linear Stern-Volmer equation, which provides further evidence that the Ni(II) complex bind to DNA. The quenching plots illustrate that the quenching of EB bound to DNA by the complex is in good agreement with the linear Stern-Volmer equation, which also proves that the complex binds to DNA. The value for the Ni(II) complex is  M−1. The data suggest that the Ni(II) complex interacts with DNA.

3.3.3. Viscosity Studies

Optical photophysical techniques are widely used to study the binding model of the ligand, metal complexes, and DNA but not to give sufficient clues to support a binding model. Therefore, viscosity measurements were carried out to further clarify the interaction of metal complexes and DNA. Hydrodynamic measurements that are sensitive to the length change (i.e., viscosity and sedimentation) are regarded as the least ambiguous and the most critical tests of a binding model in solution in the absence of crystallographic structural data [15, 20]. A classical intercalative mode causes a significant increase in viscosity of DNA solution due to increase in separation of base pairs at intercalation sites and hence an increase in overall DNA length. By contrast, complexes that bind exclusively in the DNA grooves by partial and/or nonclassical intercalation, under the same conditions, typically cause less pronounced (positive or negative) or no change in DNA solution viscosity [20]. The values of ()1/3 were plotted against [compound]/[DNA] (Figure 4). For the Ni(II) complex, as increasing the amounts of compound, the viscosity of DNA decreases steadily. The decreased relative viscosity of DNA may be explained by a binding mode which produced bends or kinks in the DNA and thus reduced its effective length and concomitantly its viscosity. The results suggest that the Ni(II) complex may bind to DNA by partial intercalation.

4. Conclusions

In this paper, a new Ni(II) complex has been synthesized and characterized. Moreover, the DNA-binding properties of the Ni(II) complex were investigated by electronic absorption, fluorescence, and viscosity measurements. The experimental results indicate that the Ni(II) complex can bind to CT-DNA by partial intercalation mode. Information obtained from our study will be helpful to understand the mechanism of interactions of benzimidazoles and their complexes with nucleic acids and should be useful in the development of potential probes of DNA structure and conformation.

Appendix

Additional Data

CCDC 825141 contains the additional crystallographic data for this paper. These data can be obtained free of charge from The Cambridge Crystallographic Data Centre via http://www.ccdc.cam.ac.uk/data_request/cif.

Acknowledgments

The authors acknowledge the financial support and a grant from “Qing Lan” Talent Engineering Funds by Lanzhou Jiaotong University. The grant from “Long Yuan Qing Nian” of Gansu Province is also acknowledged.