Abstract

Infection is the leading complication associated with intravascular devices, and these infections develop when a catheter becomes colonized by microorganisms. To combat this issue, medical device manufacturers seek to provide healthcare facilities with antimicrobial medical devices to prevent or reduce the colonization. In order to adequately evaluate these devices, an in vivo model is required to accurately assess the performance of the antimicrobial devices in a clinical setting. The model presented herein was designed to provide a simulation of the subcutaneous tunnel environment to evaluate the ability of an antimicrobial peripherally inserted central catheter (PICC), coated with chlorhexidine based technology, to reduce microbial migration and colonization compared to an uncoated PICC. Three samples of control, uncoated PICCs and three samples of coated PICCs were surgically tunneled into the backs of female New Zealand White rabbits. The insertion sites were then challenged with Staphylococcus aureus at the time of implantation. Animals were evaluated out to thirty days and sacrificed. Complete en bloc dissection and evaluation of the catheter and surrounding tissue demonstrated that the chlorhexidine coated catheter was able to significantly reduce microbial colonization and prevent microbial migration as compared to the standard, un-treated catheter.

1. Introduction

Indwelling intravascular devices, which are becoming integral components of modern medical practice, are associated with the high incidence of nosocomial bloodstream infections especially in intensive care patients, those receiving chemotherapy and those dependent upon haemodialysis. Central venous catheters (CVCs) account for approximately 90% of all catheter-related bloodstream infections (CRBSIs) [1]. PICCs are associated with similar rates of CRBSI as CVCs, placed in internal jugular or subclavian veins (2 to 5 per 1,000 catheter days) [2]. It has been estimated that nearly 80,000 CRBSIs occur in intensive care units alone and result in costs approaching 2 billion dollars and 20,000 deaths annually [35]. Colonization of the catheter by microorganisms forming a biofilm is the first stage of the infection process [6]. Sources for microbial colonization may be environmental contamination, skin organisms, postplacement subcutaneous tract infection, intraluminal contamination, or hematogenous seeding [7]. Whether derived from the patient’s skin, hematogenously, or from a health care worker, microorganisms present in the catheter display the characteristic reduced susceptibility to antimicrobials, which has become a hallmark of biofilms [8]. Biofilms are a cohesive matrix of microorganisms, mucopolysaccharides (slime), and extracellular constituents that exist in virtually every natural environment [9]. They form on a solid surface (such as a catheter or other implanted medical device) in the presence of shear force or flow (as would be encountered in the environment surrounding an implant medical device), as a mechanism to avert being removed from that environment [10]. Biofilm formation is a developmental process moving from attachment to microcolony formation and then to mature biofilm development under the control of specific biofilm genes [11]. The production of a mucopolysaccharide (slime) on the surface, which further protects the biofilm, can often be seen with the naked eye [9]. Microbial biofilms demonstrate recalcitrance towards a wide range of antimicrobial treatments and have been reported to be 100–1,000 times less susceptible than their planktonic counterparts [12]. This resistance is due to the presence of extracellular polysaccharide matrix, the physicochemical heterogeneity developed within such consortia, acquiring of multiantimicrobial resistance genes, and the presence of cells of highly recalcitrant physiology (persisters) [13]. Thus, once an implanted medical device (such as a PICC) is colonized by biofilm bacteria, the bacteria are protected from both immune response and antimicrobial therapy, and thus, such infections are rarely resolved [1416]. This fact often leads to the failure of conventional antibiotic therapy and necessitates the removal of infected devices. Removal of the infected device is often not practical (as in the case in pace makers or artificial joints) or not at good strategy as this can lead to the production of detached, slime-enclosed, antibiotic-resistant aggregates that can initiate endocarditis or pneumonia by dissemination in the blood stream [17]. With this in mind, medical device manufacturers and researchers in biofilm microbiology have developed strategies and technologies to prevent the initial colonization and prevent the subsequent biofilm colonization of various implant medical devices. A good approach to the reduction of CRBSI includes surface modification of devices to reduce microbial attachment and biofilm development as well as the use of CVCs precoated with antimicrobials such as chlorhexidine and/or silver sulfadiazine and antibiotics such as minocycline and rifampin [1822].

The proper development and evaluation of antibiofilm efficacy of antimicrobial coated or eluting medical devices has proven to be a daunting task due to the limitations of good in vitro evaluation tools. Rapid screening tools like the MBEC assay can be utilized to evaluate short-term exposures and isolated antimicrobials and potential antibiofilm agents [2325] but do not evaluate the antimicrobial agent as it is presented on the actual medical device. Most commonly, the testing of potential implant materials or medical devices is often done by measuring planktonic growth in the presence of the respective material or by “zone of inhibition” determination [26, 27]. Placing selected bacterial suspensions and exposing them to short-term incubation (<24 hr) directly on implant/coated materials and analyzing viable counts is also a standardized method to examine antibacterial activity (Japanese Industrial Standards, as described in [28]). Capillary flow cells that study different biofilm stages under constant nutrient, salt, and pH conditions [29] or disc/drip flow reactors that expose implant/coated materials to biofilm under shear [30] account for the dynamic environment the devices may be exposed to and the biofilm state of the organisms colonizing the device but are limited in that only partial devices or components thereof can be assessed. The so-called “roll plate,” method first described by Maki et al. [31], can evaluate the entire surface of the catheter but is also limited in its practicality and potential operator errors associated with the manipulations of the catheters.

When evaluating and developing implant medical devices with surface modifications, the study of the antibacterial/antibiofilm effects must take into account the actual device itself and be tested while exposed to an appropriate in vitro test system that mimics the environment in which it is expected to perform. In addition, demands of regulatory agencies such as the American Food and Drug Administration (FDA) [32] require the utilization of effective in vitro (preferably supported by in vivo) data to support any label claims. This evaluation needs to simulate human clinical situation which includes (1) using the actual device (preferably sterile finished goods), (2) preconditioning or exposure of the device to body fluid, (3) using a dynamic (rather than static) environment, (4) evaluating the actual contact time with the body, (5) at body temperature, and (6) assuring that the organisms used are relevant to the label claim [32, 33].

To address the needs and testing gaps described above, we developed an in vivo test method to provide a high-throughput, repeatable, and cost-effective simulation of the subcutaneous tunnel environment with multiple end points to evaluate the ability of an antimicrobial PICC to reduce microbial migration and colonization as compared to an uncoated PICC.

2. Methods and Materials

2.1. Animals

A total of 10 healthy, ~15-week-old, ~3 Kg, New Zealand white female rabbits (Charles River Laboratories, Canada) were used in this study. Five rabbits were allocated to each sample time (21 and 30 days, resp.). All animals received a thorough physical examination before entry into the study. Any animal that did not meet the health and weight criteria was excluded from the study. Animals with any infection, inflammation, dermatitis, muscular disease, or apparent abnormalities of the urinary tract as well as any animal deemed unsuitable by the study director were also excluded from this study. The study was conducted in compliance with the guidelines of the Canadian Council on Animal Care after the appropriate review by the Institutional Animal Care and Use Committee.

2.2. Catheters

All catheter materials were custom manufactured to 13 cm lengths from the tip and heat sealed at ends. The catheters were individually packaged and sterilized by Arrow International, Inc. (Reading, PA). The test article consisted of 5.5 French (Fr) double lumen Arrow Antimicrobial PICC with Chlorag + ard Technology (Teleflex Medical Inc, Reading, PA). The control/predicate material consisted of uncoated 5.5 Fr double lumen PICC material (Teleflex Medical Inc, Reading, PA).

2.3. Experimental Design

Animals were allocated to test groups using a random block procedure and randomly assigned to groups 1 (21-day catheterization) and 2 (30-day catheterization). As each animal served as its own control and treatment, control/treatment sides were allocated to each treatment group using a random block procedure and randomly assigned to each rabbit. Test and control sides were randomized between animals and groups (see Figure 1).

2.4. Preparation of Inoculum

Staphylococcus aureus ATCC 29213 (American Type Culture Collection, Manassas, VA) was selected due to its role in CRBSI [33]. This strain was selected because it has been used successfully based on our experience to cause infection in NZW rabbits, and this strain was used in an in vitro challenge experiment using artificially aged PICC material and demonstrated as significant (>Log10 4 reduction compared to controls). Using a cryogenic stock (at −70°C), a first subculture of the bacterial organisms listed above was streaked out on tryptic soy agar (TSA) (Becton Dickinson, Sparks, MD). The plate was incubated at 3 5 ± 2 °C for 24 hours and stored wrapped in parafilm at 4 ± 2 °C. From the first sub-culture, a second sub-culture was streaked out on TSA and incubated at 3 5 ± 2 °C for 24 hours. The second sub-culture was used within 24 hours starting from the time it was first removed from incubation. From a fresh streak plate, each study organism was inoculated in 200 mL of sterile Trypticase Soy Broth (TSB) (Becton Dickinson, Sparks, MD). Organisms were grown in TSB at 3 7 ± 2 °C on a rotary shaker (at approximately 150 rpm) for 12–18 hours. This achieved an inoculum density of approximately 109 colony-forming units (CFU)/mL. The inoculum was adjusted to an approximate cell density of 106 CFU/mL by diluting Staphylococcus aureus in sterile 0.9% saline (Baxter, Canada). The cell density was confirmed by serially diluting and spot plating triplicate samples of the inoculum.

2.5. Surgical Procedures and Catheterization

Rabbits were fasted approximately 12 hours prior to surgery. Anesthesia (Isoflurane) (Benson Medical, Markham, ON, Canada) was administered by the qualified veterinary staff per test facility standard operating procedure. Selection of the dose and agents followed the standard operating procedures of the test facility. The hair over the dorsal thorax and abdomen was clipped with a number 40 Osler clipper blade and scrubbed with a soap that did not contain any disinfectant or antibiotic. Three incisions were made on either side of the dorsal midline for catheter insertion. The catheters (13 cm long) were inserted subcutaneously in each rabbit so ~8 cm tunneled under the skin and 6 cm was on the skin surface (see Figure 1). The catheters were anchored to the skin with adhesive tape and sutures. Animals were observed for any adverse reactions. The catheters were challenged by inoculating the insertion site with ~1 mL of inoculum. To supplement this significant challenge, a gauze sponge with 5 mL of the prepared bacterial suspension was also placed over each insertion site. Opsite (Smith and Nephew, Hull, England) was placed over all catheters and inoculum-soaked sponges. Tensoplast (BSN Medical, Pinetown, South Africa), an occlusive bandage, was then placed over all catheters to prevent self-mutilation and removal of the catheters. All animals were observed for morbidity and mortality, overt signs of toxicity (including abstinence of water), and any signs of distress throughout the study per test facility procedures.

2.6. Euthanasia and Harvesting of Samples

Animals were euthanized with an overdose of intracardiac-injected sodium pentobarbital at 21 (group 1) and 30 (group 2) days after catheterization, based on Alberta Veterinary Medical Association (AVMA) procedures and guidelines. Animals were immediately prepared for aseptic collection of tissue samples. A complete en bloc dissection was made excising the skin and catheter at the insertion site and the tissue underlying and surrounding the catheter. The distal and proximal ends of the tissue were surgically stapled to the PICC line to secure the location. A photo was taken to record complete length of the catheter positioned in the tissue bloc (in situ). The catheter (and surrounding tunnel) was segmented into 1 0 × 1  cm segments for analysis as described in Table 1. The procedure was repeated for each catheter.

2.7. Microbiology Procedures

Catheter Segments
1 cm segments were aseptically separated from the surrounding tissue. Each catheter segment was inserted into a sterile 6-well plate (Becton Dickinson, Franklin lakes, NJ) containing 4 mL of D/E neutralizing broth (Becton Dickinson, Sparks, MD) in each well. The entire 6-well plate assembled above was sonicated in a bath sonicator (VWR 550T, VWR, Canada) for 30 minutes. Following sonication, 100  𝜇 L from each well of the six-well plates was placed into the first 12 empty wells of the first row of a 96-well microtiter plate (Nunc, Roskilde, Denmark). 180  𝜇 L of 0.9% sterile saline was placed in the remaining rows. A serial dilution (100–10−7) was prepared by moving 20  𝜇 L down each of the 8 rows. 10  𝜇 L was removed from each well and spot plated on a prepared TSA plate. Plates were incubated at 3 7 ± 2 °C and counted after approximately 24 hours of incubation. Data was evaluated as CFU/catheter segment.

Tissue Segments
Each 1 cm tissue segment was aseptically homogenized (Brinkman Polytron PT (VWR, Canada) in 2.5 sterile phosphate buffered saline (PBS: 2 g KCl, 2.4 g KH2PO4, 80 g NaCl, and 14.4 g Na2HPO4, to 1000 mL; pH 7.4)) in sterile preweighed 50 mL conical centrifuge tubes (Fisher Scientific, Mexico). Following homogenization, 100  𝜇 L from each tissue homogenate specimen was placed into the first 12 empty wells of the first row of 96-well microtiter plates. The remaining wells all contained 180  𝜇 L of 0.9% sterile saline. A serial dilution (100–10−7) was prepared by moving 20  𝜇 L down each of the 12 rows. From each well, 10  𝜇 L was removed and spot plated on TSA plates. Culture plates were incubated at 3 7 ± 2 °C for 24 hours, after which the numbers of CFU were counted as CFU per gram of tissue.

2.8. Calculation of Log Reduction

Catheter efficacy is presented by Log10 reduction [2325, 32]. Sample calculations to describe the data presented in Tables 2, 3, 4, and 5, are presented below.

Tissue Log Reduction
Total CFU recovered per gram of tissue = (raw plate count/0.01 mL {the volume plated}) * 2.5 mL {the total volume homogenized}/tissue sample weight. Log transformed value = Log10(CFU/sample + 1) [23].
Log reduction (Log 𝑅 ) = (mean Log10 control) − (mean Log10 test).

Catheter Log Reduction
Total CFU recovered per gram of tissue = (raw plate count/0.01 mL {the volume plated}) * 4.0 mL {the total sonication volume}. Log transformed value = Log10(CFU/sample + 1) [23].
Log reduction (Log 𝑅 ) = (mean Log10 control) − (mean Log10 test).
For statistical analysis, a nonpairwise, two-tailed Student’s 𝑡 -test was used. 𝑃 0 . 0 5 .

2.9. Scanning Electron Microscopy (SEM) Samples

One cm catheter segments were aseptically separated from the surrounding tissue. The samples were placed into empty receiver vials. In a fume hood, primary fixative (5% glutaraldehyde in 0.1 M Na cacodylate buffer pH = 7.5) was added to each vial to completely cover all samples. The vials were capped and incubated at 4 ± 2 °C for 16 to 24 hours. After-fixation, the samples caps were loosely removed. The loosely capped sample vials were placed into a fume hood, and the samples were allowed to air dry for 72 to 96 hours. Appropriate standard operating procedures (SOPs) for use of a Hitachi S3700N Scanning Electron Microscope were followed. SEM data was recorded as images and through notes describing each sample.

2.10. Histopathology

Tissue specimens were excised and fixed in 10% neutral buffered formalin. The samples were embedded in paraffin and sectioned, mounted, and stained with hematoxylin and eosin (H&E) per facility SOPs. Samples were reviewed by a blinded third-party board-certified pathologist for a scored report detailing findings.

3. Results

Animals 2, 5, and 6 removed some of the control catheters prior to the scheduled removal at day 30. This behavior is associated with infection and inflammation of the tissue around the catheters as animals cannot ethically be restrained to totally prevent them from accessing the catheters. At the time of sacrifice, the tissue tract associated with the catheter could be clearly identified allowing removal and analysis on animals 2 and 5. The loss of these samples is denoted by an asterisk (*) in the supporting data tables.

Animal models of infection of medical devices generally tend to produce variability. Infections may be associated with the test catheters due to the significant level of challenge. Also, infection may not be observed in all control devices due to the ability of the healthy (nonimmunocompromised) animal to resist or eliminate the infection. In this model, a significant and continual challenge was provided to both the control and the test catheters. In spite of the heavy challenge (106 CFU/mL), the test catheters consistently demonstrated prevention of catheter and associated tissue bacterial colonization and reduction in catheter and tissue colonization by the challenge bacteria (see Tables 25). In vivo efficacy was demonstrated by meeting the acceptance criteria (4 Log reduction of adhered biomass) [32] over a 30-day time period. This is further demonstrated by the observation that the test catheters significantly reduced tissue colonization (40% test article tissue colonization versus 80% control tissue colonization) on day 21 and (6% test article tissue colonization versus 76% control tissue colonization) on day 30 (see Table 6). More significantly, the test catheters significantly reduced catheter colonization (0% test article colonization versus 43% control article colonization) on day 21 and (0% test article colonization versus 54% control article colonization) on day 30 (see Table 7). The plate count data was further supported by the scanning electron microscopic (SEM) evaluation of the selected catheter segments analyzed. Generally, irrespective of sample location or time point, no major differences were seen between the various samples of the coated catheter material. Occasional patchy deposition of host proteins and occasional areas of aggregated host red blood cells (RBCs) were seen on the catheter surfaces. The catheter surface was largely visible on most samples. No significant amounts of bacteria were observed indicating that the log reduction data obtained during this study was due to the device preventing the adherence of the challenge microorganism, rather than killing or inactivating adhered cells (Figure 2). The control (or reference catheters) on the other hand, typically presented with heavy deposition of host proteins, RBCs, and bacterial proteins and exopolysaccharide, was consistently observed across all samples. Heavy fibrin deposition was observed on several samples (data not shown). Most bacteria were embedded in the host/bacterial extracellular protein/polysaccharide matrix. Occasional healthy bacterial cocci were visible at the surface (Figure 2(d)). These observations are consistent with the viable cell count data obtained (Tables 25).

Clinical Efficacy
In addition to the plate count data, gross pathological findings clearly demonstrate the efficacy of the antimicrobial PICC as demonstrated by the digital images presented in Figure 3. The antimicrobial PICC presented with minimal pathological signs of infection (device associated swelling, capsule, pus), while the untreated control devices uniformly demonstrated clinical signs of infection (pus, swelling, extensive capsule surrounding the device, and necrotic tissue). A sample comparison set (animal 10) is presented to highlight this discussion point in Figure 3. The impact on the surrounding tunnel tissue was further examined by histological evaluation (Figure 4).

4. Discussion

This model was effective in comparing the patterns of microbial migration along the catheter segments proximal and distal to the entry site, comparing microbial colonization for antimicrobial PICC to that for untreated PICC and comparing the efficacy of the antimicrobial PICC for microbial colonization and inflammation mitigation up to 21 and 30 days after catheter insertion as compared to untreated catheters. In addition, the results showed that chlorhexidine-based technology was effective in reducing bacterial colonization on catheters and their surrounding tissue for up to 30 days. This model represents the subcutaneous space and not the vasculature; however, it is the subcutaneous space that is frequently infected, and tracking of the infection leads to vasculitis and cellulitis. In addition, the model does not simulate the use of the device in the clinical setting that includes repeated manipulations of the device under repeated challenge conditions and up to the projected life of the device. Rather, this model simulates the in vivo environment that the catheter is expected to be in contact with up to the projected life of the device. This feature of the model is important in that the risks of CRBSI increase as the duration of implantation increases [34, 35], and the replacement of PICCs is not a recommended strategy [17, 34] underlying the need for devices with long-acting antimicrobial coatings and models that can accurately evaluate these technologies.

The authors recognize that this model has several limitations: the first is that not all organisms will reproducibly colonize rabbit tissue, as such S. aureus was chosen for this model due to reproducibility in this model and in the literature and due to the fact that this species represents the causative agent of the majority of clinical CRBSIs [33]. Therefore, for product label claims that seek to cover the full spectrum of causative agents of CRBSI or catheter colonization, it is recommended that this model be used in conjunction with other recognized in vitro assays that can specifically test against this diverse group of organisms [33]. Secondly, these are healthy animals, and their immune systems can clear the infection over the duration of the study (see Tables 25). It can be hypothesized that the catheters may provide protection for only a few days, and then the animal’s immune system clears the infection. For that reason, it is critical that control (nonantimicrobial) catheters be run concurrently within the same animal to demonstrate that the antimicrobial effect is in fact due to the antimicrobial agent and not just the animal’s immune response. This limitation was not valid and pertinent in this study because antimicrobial catheters did clearly demonstrate reduction in colonization on catheter surface, surrounding tissue, and clinical/localized infection symptoms. Lastly, to accurately predict and demonstrate duration of the efficacy, it is important to run a parallel in vitro study utilizing unchallenged 21- and 30-day explant materials or artificially aged materials followed by an in vitro challenge of the organism to test whether the materials can still resist biofilm colonization. Also, chronic irritation of a chronic wound will cause a rabbit to remove its bandage and its catheter. It is ethically not possible to provide such restraint to prevent removal of a severely irritated catheter. However, despite these limitations, this model does represent an effective in vivo assessment of antimicrobial implant medical device performance over an extended time period. We present this work to further expand the research tool box available to medical device manufacturers and regulatory agencies to develop, review, and assess new antimicrobial implant medical devices.

While many factors affect microbial colonization of the catheter, duration of implantation is a major complication leading to infection [33, 34]. Clearly preventing infections on the surface of indwelling medical devices over extended time frames is an important issue with the increased use of medical devices. To provide healthcare facilities with another tool to attain and sustain their goal of zero catheter-related infections, Teleflex has developed both a 4.5 Fr single lumen and a 5.5 Fr double lumen Arrow Antimicrobial PICC with Chlorag + ard Technology to reduce the potential risk for catheter colonization. Both the indwelling external surface and entire fluid pathway of the catheters are treated with chlorhexidine-based technology to address this issue. This model successfully demonstrated that this technology was effective in catheter colonization reduction up to 30 days and showed promise in reducing CRBSI.

Acknowledgments

This project was funded by Teleflex Medical Inc and was executed by Innovotech Inc.