Table of Contents Author Guidelines Submit a Manuscript
BioMed Research International
Volume 2014, Article ID 790572, 6 pages
Research Article

Initial Sliding Wear Kinetics of Two Types of Glass Ionomer Cement: A Tribological Study

1UFR d’Odontologie, Université de Lyon, 11 rue Guillame Paradin, 69372 Lyon, France
2Service de Consultations et Traitements Dentaires, Hospices Civils de Lyon, 6-8 Place Deperet, 69365 Lyon, France
3Laboratoire des Multimatériaux et Interfaces, CNRS UMR 5615, Université de Lyon, 11 rue Guillaume Paradin, 69372 Lyon, France
4Laboratoire de Génie des Procédés et Matériaux, Ecole Centrale Paris, Chemin des Vignes, 92295 Châtenay-Malabry, France
5UFR d’Odontologie, Université Denis Diderot Paris 7, 5 rue Garancière, 75006 Paris, France

Received 27 February 2014; Revised 3 June 2014; Accepted 4 June 2014; Published 29 June 2014

Academic Editor: Salvatore Sauro

Copyright © 2014 Cyril Villat et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Citations to this Article [3 citations]

The following is the list of published articles that have cited the current article.

  • Farzin Heravi, Hossein Bagheri, Abdolrasoul Rangrazi, and Seyed Mojtaba Zebarjad, “Incorporation of CPP-ACP into Luting and Lining GIC: Influence on Wear Rate (in the Presence of Artificial Saliva) and Compressive Strength,” ACS Biomaterials Science & Engineering, 2016. View at Publisher · View at Google Scholar
  • Agueda Maria Turatti, and Altair Soria Pereira, “Wear resistant boron carbide compacts produced by pressureless sintering,” Ceramics International, 2017. View at Publisher · View at Google Scholar
  • Xian-Qiang Pei, Leyu Lin, Alois K. Schlarb, and Roland Bennewitz, “Contact Area and Shear Stress in Repeated Single-Asperity Sliding of Steel on Polymer,” Tribology Letters, vol. 67, no. 1, 2019. View at Publisher · View at Google Scholar