Abstract
The combined overlap extension PCR (COE-PCR) method developed in this work combines the strengths of the overlap extension PCR (OE-PCR) method with the speed and ease of the asymmetrical overlap extension (AOE-PCR) method. This combined method allows up to 6 base pairs to be mutated at a time and requires a total of 40–45 PCR cycles. A total of eight mutagenesis experiments were successfully carried out, with each experiment mutating between two to six base pairs. Up to four adjacent codons were changed in a single experiment. This method is especially useful for codon optimization, where doublet or triplet rare codons can be changed using a single mutagenic primer set, in a single experiment.
1. Introduction
Site directed mutagenesis is a technique used for substitution, addition, and deletion of specific base sequences in DNA [1]. It is an important tool to generate mutants with altered amino acid sequences for enzyme studies, investigation of the relationship between structure and functions of proteins, and functional analysis of genes or their regulatory sequences [2–4]. Altering the amino acid sequence of an enzyme has been used to improve enzyme properties such as catalytic activity, thermostability, and chemical tolerance [5, 6]. Furthermore, site directed mutagenesis is also used in codon optimization to remedy codon bias during heterologous expression of proteins [7, 8].
PCR based mutagenesis methods are advantageous because they are rapid and have very high mutation efficiencies [3]. Mutations are introduced through mutagenic primers which contain one or more mismatched bases [1, 2]. These mutagenic primers are incorporated during PCR and the mutant DNA is amplified exponentially [1, 2].
Among the PCR based methods, the overlap extension PCR (OE-PCR) and asymmetrical overlap extension PCR (AOE-PCR) are notable for their simplicity and efficiency in multiple-site mutagenesis [2, 9]. The OE-PCR method consists of two primary PCR reactions which generate mutant DNA fragments with overlapping ends and a secondary reaction which joins the two fragments into a single fragment [9]. The OE-PCR method is both durable and robust [10].
The AOE-PCR method consists of two primary PCR reactions which generate single stranded mutant DNA with overlapping ends and an incubation step where the overlapping single stranded DNA anneal together and are extended to produce a single PCR product [2]. In the AOE-PCR method, excess gene specific primers but limited mutagenic primers are used, resulting in the formation of single stranded DNA. Compared to the OE-PCR method, it is faster as it bypasses gel purification of the primary PCR products and simplifies the secondary PCR reaction into a single incubation step [2].
In this work, the combined overlap extension PCR (COE-PCR) method, which combines the advantages of the OE-PCR and AOE-PCR methods, was used for codon optimization of the Solanum tuberosum isoamylase Stisa2 gene for heterologous expression in E. coli. This method is reliable, robust, and faster than conventional OE-PCR methods.
2. Materials and Methods
2.1. Primer Design
The gene specific primers (GSP): forward (FGSP) and reverse (RGSP), were designed to contain suitable restriction sites and flank the forward mutagenic primers (FMP) and reverse mutagenic primers (RMP). The mutagenic primers (MP) were complementary to each other, with the mutagenic bases in the center of each primer, and were between 17 and 32 bp in length depending on the number of base pairs to be changed. The mutagenic primers were chosen to have the same annealing temperature so that both primary PCR reactions could be performed simultaneously. The mutagenic primers were designed with the aid of PrimerX program (http://www.bioinformatics.org/primerx/index.htm) and checked for primer-dimer and hairpin formation using OligoAnalyzer 3.1 (http://sg.idtdna.com/calc/analyzer). All primers were synthesized and trityl-on-purified (TOP) by a commercial vendor. The list of primers is shown in Table 1.
2.2. The COE-PCR Method
The COE-PCR method consists of two primary PCR reactions and a secondary PCR reaction. The primary PCR reactions follow a standard PCR reaction but utilize limited mutagenic primers. The primary PCR reaction for each primer pair was carried out in separate tubes, using 5 pmol GSP, 1.25 pmol MP, 2 U Pfu DNA polymerase (Fermentas), 5 nmol dNTP mix, 62.5 nmol MgCl2, and 2.5 pg template DNA in a 25 μL reaction. The template was the Stisa2 gene (Accession: AY132997) in a pSTAG vector [11, 12]. The PCR thermocycling profile used was as follows: initial denaturation for 5 minutes at 95°C, followed by 30 cycles of 30 seconds at 94°C, 30 seconds at annealing temperature, and 2–4 minutes at 72°C. This was followed by a final elongation of 72°C for 5 minutes. was set at 50–55°C for all primer sets to match of the gene specific primers rather than calculated by PrimerX program.
The primary PCR products were visualized on 1% agarose gel stained with ethidium bromide. The amount of DNA ladder (Fermentas Gene Ruler 1 kb DNA ladder) loaded was standardized at 200 ng and 300 ng for small- and medium-sized lanes, respectively. PCR products loaded were standardized at five microliters upon completion of PCR cycles. After the primary PCR, if a single band of the expected size was obtained, gel purification was unnecessary. If multiple bands were obtained, the band of the correct expected size was excised and gel-purified. The concentration of the PCR products was estimated by comparing band intensity with the DNA ladder using ImageJ software (http://imagej.nih.gov/ij/) [13].
In the secondary PCR reaction, 200–400 ng of each primary PCR product was used as template; 4 pmol FGSP, 4 pmol RGSP, 1 U Pfu DNA polymerase, 8 nmol dNTP mix, and 100 nmol MgCl2 were used in a single 40 μL reaction. The PCR mixture was subjected to 5–10 PCR cycles, which produced the full length mutagenic DNA which was then excised and gel-purified to be used for cloning or downstream applications. An overview of the COE-PCR method is shown in Figure 1.
Table 2 shows the primer sets used for each mutagenesis experiment. The experiments were performed sequentially where the previous PCR product was used as the template in the subsequent PCR reaction. After the final mutation, the PCR product was purified, digested with restriction enzymes, and cloned into a pSTAG vector for sequencing purposes.
3. Results and Discussion
The COE-PCR method was successful in producing the desired mutations. DNA sequencing showed that all the point mutations were correctly performed.
The results of the primary PCR reactions depended mainly on the primer pair (GSP + MP), which determined whether optimization and gel purification were necessary. Most reactions were straightforward and did not require gel purification. However, several primary PCR reactions produced multiple bands including the expected band, which was gel excised. Meanwhile, only two primary PCR reactions required optimization before the expected band was obtained. Following the primary PCR reactions, the secondary PCR reactions were easily performed and none of the reactions required any optimization. A summary of the results is shown in Table 3.
Example results for three primer sets to describe the COE-PCR method are given as follows. The results of the 8th primer set showed the best case scenario where both the primary reactions produced single bands and the secondary reaction produced a single product of the expected size (Figure 2). The results of the 4th primer set showed straightforward primary reactions but a nonoptimum secondary reaction (Figure 3). The secondary PCR reaction yielded multiple bands, including a bright band which matched the expected size. This target band was excised and gel-purified. The results of the 6th primer set showed a requirement for optimization of the first primary PCR reaction (Figure 4) in order to produce the desired band. The secondary PCR reaction proceeded as expected.
The changes made to the OE-PCR method are minor, namely, the primer concentration used and the amount of the template DNA used in the secondary PCR reaction. However, this simple modification results in a method that combines the robustness of the OE-PCR with the speed and ease of the AOE-PCR methods. The COE-PCR can effectively change up to six base pairs at a time.
Similar to AOE-PCR, the use of asymmetrical primers causes the exhaustion of mutagenic primers after the primary reactions. Exhaustion of mutagenic primers is important to prevent residual mutagenic primers from competing with the overlapping ends, decreasing the efficiency of the secondary reaction [2]. Thus, double stranded DNA which is the primary PCR product need not be gel-purified if a single band is obtained. However, if the concentration of mutagenic primers is too low, the amount of primary PCR product would be reduced. Therefore, the concentration of mutagenic primers needs to be sufficient for amplification of the primary PCR products but should also be exhausted at the end of the PCR reaction. Although fast and easy, the AOE-PCR method as described [2, 14] was found to be unsuitable for larger base pair changes because the single stranded DNA produced had the tendency to anneal nonspecifically to other sections of DNA, producing multiple bands (unpublished work).
A novel feature of the COE-PCR method is the large amount of starting template in the secondary reaction. This allows sufficient amplification of mutant DNA in as few as 5–10 cycles. This is faster than the secondary PCR reaction of another improved OE-PCR method [15], which requires 30 cycles. The template in the secondary PCR reaction can be prepared simply by estimating the DNA concentration and mixing the PCR products in an equal ratio. DNA concentration need not be determined exactly but can be estimated simply by comparing band intensity to that of the DNA ladder using freely available software such as ImageJ software.
An important step in the COE-PCR method is size estimation of the PCR products. Correctly identifying the correct PCR products eliminates the need for optimization even if multiple bands are produced. While a single primary PCR product is ideal, sometimes, multiple bands are obtained. In this case it is easier to excise and purify the band of the correct estimated size than to optimize the experiment until a single band is obtained.
Errors introduced during PCR usually result from the DNA polymerase mediated synthesis or from the incorporation of missynthesized oligonucleotides [7]. In this work, all the point mutations were successfully performed using the eight primer sets, with no other mutation occurring elsewhere in the gene. This could be attributed to the use of high fidelity DNA polymerase and high quality TOP primers.
The COE-PCR method is highly suitable for site directed mutagenesis work where multiple adjacent base pairs are to be changed, such as in codon optimization for heterologous expression in E. coli. Replacing clusters of rare codons which inhibit protein expression in E. coli has been shown to improve protein expression [8, 16]. Using the COE-PCR method, changes of up to four adjacent codons were performed using a single mutagenic primer set, eliminating a cluster of rare codons in a single experiment. It is likely that this method can support changes of even more than six base pairs as long as the flanking sequences are of sufficient length.
4. Conclusion
The COE-PCR method described here combines the strengths of the OE-PCR method with the speed and ease of the AOE-PCR method. It is faster than conventional OE-PCR as it shortens the number of PCR cycles to 40–45 cycles, and it eliminates the need for DNA purification if single bands are obtained in the primary PCR reactions. This method is useful when multiple base pair changes are desired, such as in codon optimization.
Abbreviations
| COE-PCR: | Combined overlap extension PCR |
| OE-PCR: | Overlap extension PCR |
| AOE-PCR: | Asymmetrical overlap extension |
| GSP: | Gene specific primers |
| FGSP: | Forward gene specific primer |
| RGSP: | Reverse gene specific primers |
| FMP: | Forward mutagenic primers |
| RMP: | Reverse mutagenic primers |
| MP: | Mutagenic primers |
| TOP: | Trityl-on-purified. |
Competing Interests
The authors declare that there is no conflict of interests regarding the publication of this paper.
Acknowledgments
The authors wish to thank Ministry of Higher Education Malaysia for partial funding to conduct this research through FRGS Grant 961/2013(02) and Universiti Malaysia Sarawak for the Zamalah Pascasiswazah UNIMAS Scholarship to Nikson Fatt-Ming Chong.