Table of Contents Author Guidelines Submit a Manuscript
BioMed Research International
Volume 2017, Article ID 5807304, 9 pages
https://doi.org/10.1155/2017/5807304
Research Article

Evaluation of Mechanical Properties and Marginal Fit of Crowns Fabricated Using Commercially Pure Titanium and FUS-Invest

1Department of Stomatology, Chinese PLA General Hospital, Beijing 100853, China
2Department of Stomatology, People’s Hospital of Yuxi City, Yuxi 653100, China
3Department of Prosthodontics, Anyang Sixth People’s Hospital, Anyang 45500, China
4State Key Laboratory of Military Stomatology, Department of Prosthodontics, School of Stomatology, The Fourth Military Medical University, Xi’an 710032, China
5Institute of New Materials Technology, Beijing University of Science and Technology, Beijing 100853, China

Correspondence should be addressed to Sefei Yang; moc.nuyila@iefiefgnaygnay

Received 19 May 2017; Revised 26 June 2017; Accepted 12 July 2017; Published 23 August 2017

Academic Editor: Nick Silikas

Copyright © 2017 Jinshuang Wu et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

Jinshuang Wu, Xianli Wang, Helin Xing, Tianwen Guo, Chaofang Dong, and Sefei Yang, “Evaluation of Mechanical Properties and Marginal Fit of Crowns Fabricated Using Commercially Pure Titanium and FUS-Invest,” BioMed Research International, vol. 2017, Article ID 5807304, 9 pages, 2017. https://doi.org/10.1155/2017/5807304.