Table of Contents Author Guidelines Submit a Manuscript
BioMed Research International
Volume 2017, Article ID 5807304, 9 pages
https://doi.org/10.1155/2017/5807304
Research Article

Evaluation of Mechanical Properties and Marginal Fit of Crowns Fabricated Using Commercially Pure Titanium and FUS-Invest

1Department of Stomatology, Chinese PLA General Hospital, Beijing 100853, China
2Department of Stomatology, People’s Hospital of Yuxi City, Yuxi 653100, China
3Department of Prosthodontics, Anyang Sixth People’s Hospital, Anyang 45500, China
4State Key Laboratory of Military Stomatology, Department of Prosthodontics, School of Stomatology, The Fourth Military Medical University, Xi’an 710032, China
5Institute of New Materials Technology, Beijing University of Science and Technology, Beijing 100853, China

Correspondence should be addressed to Sefei Yang; moc.nuyila@iefiefgnaygnay

Received 19 May 2017; Revised 26 June 2017; Accepted 12 July 2017; Published 23 August 2017

Academic Editor: Nick Silikas

Copyright © 2017 Jinshuang Wu et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. M. Niinomi, T. Hanawa, and T. Narushima, “Japanese research and development on metallic biomedical, dental, and healthcare materials,” JOM, vol. 57, no. 4, pp. 18–24, 2005. View at Publisher · View at Google Scholar · View at Scopus
  2. H.-S. Han, H.-S. Yang, H.-P. Lim, and Y.-J. Park, “Marginal accuracy and internal fit of machine-milled and cast titanium crowns,” Journal of Prosthetic Dentistry, vol. 106, no. 3, pp. 191–197, 2011. View at Publisher · View at Google Scholar · View at Scopus
  3. C. Ohkubo, S. Hanatani, and T. Hosoi, “Present status of titanium removable dentures—A review of the literature,” Journal of Oral Rehabilitation, vol. 35, no. 9, pp. 706–714, 2008. View at Publisher · View at Google Scholar · View at Scopus
  4. T. Mori, T. Togaya, M. Jean-Louis, and M. Yabugami, “Titanium for removable dentures. I. Laboratory procedures,” Journal of Oral Rehabilitation, vol. 24, no. 5, pp. 338–341, 1997. View at Publisher · View at Google Scholar · View at Scopus
  5. M. Andersson, B. Bergman, C. Bessing, G. Ericson, P. Lundquist, and H. Nilson, “Clinical results with titanium crowns fabricated with machine duplication and spark erosion,” Acta Odontologica Scandinavica, vol. 47, no. 5, pp. 279–286, 1989. View at Publisher · View at Google Scholar · View at Scopus
  6. D. Leong, J. Chai, E. Lautenschlagnr, and J. Gilbert, “Marginal fit of machine-milled titanium and cast titanium single crowns,” International Journal of Prosthodontics, vol. 7, no. 5, pp. 440–447, 1994. View at Google Scholar · View at Scopus
  7. F. Reza, H. Takahashi, N. Iwasaki, and Y. Tamaki, “Effects of investment type and casting system on permeability and castability of CP titanium,” Journal of Prosthetic Dentistry, vol. 104, no. 2, pp. 114–121, 2010. View at Publisher · View at Google Scholar · View at Scopus
  8. R. C. S. Rodrigues, E. P. de Almeida, A. C. L. Faria, A. P. Macedo, M. D. G. C. de Mattos, and R. F. Ribeiro, “Effect of different investments and mold temperatures on titanium mechanical properties,” Journal of Prosthodontic Research, vol. 56, no. 1, pp. 58–64, 2012. View at Publisher · View at Google Scholar · View at Scopus
  9. T. Papadopoulos, S. Zinelis, and M. Vardavoulias, “Metallurgical study of the contamination zone at the surface of dental Ti castings, due to the phosphate-bonded investment material: The protection efficacy of a ceramic coating,” Journal of Materials Science, vol. 34, no. 15, pp. 3639–3646, 1999. View at Publisher · View at Google Scholar · View at Scopus
  10. I. R. Bondioli and M. A. Bottino, “Evaluation of shear bond strength at the interface of two porcelains and pure titanium injected into the casting mold at three different temperatures,” Journal of Prosthetic Dentistry, vol. 91, no. 6, pp. 541–547, 2004. View at Publisher · View at Google Scholar · View at Scopus
  11. T. D. Papadopoulos and K. D. Spyropoulos, “The effect of a ceramic coating on the cpTi-porcelain bond strength,” Dental Materials, vol. 25, no. 2, pp. 247–253, 2009. View at Publisher · View at Google Scholar · View at Scopus
  12. A. Chillman, M. Ramulu, M. Hashish, and A. Cantrell, “High pressure waterjets—An innovative means of alpha case removal for superplastically formed titanium alloys,” Key Engineering Materials, vol. 433, pp. 103–111, 2010. View at Publisher · View at Google Scholar · View at Scopus
  13. L. Yue, Z. Wang, and L. Li, “Material morphological characteristics in laser ablation of alpha case from titanium alloy,” Applied Surface Science, vol. 258, no. 20, pp. 8065–8071, 2012. View at Publisher · View at Google Scholar · View at Scopus
  14. I. Gurrappa and A. K. Gogia, “High performance coatings for titanium alloys to protect agaisnt oxidation,” Surface and Coatings Technology, vol. 139, no. 2-3, pp. 216–221, 2001. View at Publisher · View at Google Scholar · View at Scopus
  15. S.-Y. Sung and Y.-J. Kim, “Alpha-case formation mechanism on titanium investment castings,” Materials Science and Engineering A, vol. 405, no. 1-2, pp. 173–177, 2005. View at Publisher · View at Google Scholar · View at Scopus
  16. R. Inagaki, M. Kikuchi, M. Takahashi, Y. Takada, and K. Sasaki, “Machinability of an experimental Ti-Ag alloy in terms of tool life in a dental CAD/CAM system,” Dental Materials Journal, vol. 34, no. 5, pp. 679–685, 2015. View at Publisher · View at Google Scholar · View at Scopus
  17. R. van Noort, “The future of dental devices is digital,” Dental Materials, vol. 28, no. 1, pp. 3–12, 2012. View at Publisher · View at Google Scholar · View at Scopus
  18. N. K. Tolochko, V. V. Savich, T. Laoui et al., “Dental root implants produced by the combined selective laser sintering/melting of titanium powders,” Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, vol. 216, no. 4, pp. 267–270, 2002. View at Publisher · View at Google Scholar · View at Scopus
  19. J. Wu, B. Gao, H. Tan, J. Chen, C.-Y. Tang, and C.-P. Tsui, “A feasibility study on laser rapid forming of a complete titanium denture base plate,” Lasers in Medical Science, vol. 25, no. 3, pp. 309–315, 2010. View at Publisher · View at Google Scholar · View at Scopus
  20. W. S. Fragoso, G. E. P. Henriques, E. F. R. Contreras, and M. F. Mesquita, “The influence of mold temperature on the fit of cast crowns with commercially pure titanium,” Pesquisa Odontológica Brasileira = Brazilian Oral Research, vol. 19, no. 2, pp. 139–143, 2005. View at Google Scholar · View at Scopus
  21. R. C. Atwood, P. D. Lee, R. V. Curtis, and L. Di Silvio, “Multiscale modeling of titanium investment cast dental prostheses,” Materials Science and Engineering C, vol. 25, no. 3, pp. 255–262, 2005. View at Publisher · View at Google Scholar · View at Scopus
  22. K. Kitahara, F. Kubo, and J. Takahashi, “Thermal expansion typed investments for casting titanium,” Dental Materials Journal, vol. 23, no. 1, pp. 1–7, 2004. View at Publisher · View at Google Scholar · View at Scopus
  23. S. F. Yang, T. W. Guo, and Y. X. Wang, “Study on investment of titanium crown and bridge (Part I: Preliminary determination of controlled ingredients),” Chinese Journal of Prosthodontics, vol. 5, pp. 51–53, 2004. View at Google Scholar
  24. R. Fukumoto, “Development of dental quick casting with zircon-phosphoric acid investments,” Shika zairyo, kikai = Journal of the Japanese Society for Dental Materials and Devices, vol. 9, no. 2, pp. 336–356, 1990. View at Google Scholar · View at Scopus
  25. L. Rademacher, “Removable dental appliances,” Google Patents, 1988.
  26. K. M. Ibrahim, M. Mhaede, and L. Wagner, “Mechanical characterization of cp-Ti produced by investment casting,” Transactions of Nonferrous Metals Society of China (English Edition), vol. 21, no. 8, pp. 1735–1740, 2011. View at Publisher · View at Google Scholar · View at Scopus
  27. K. Qiu, W. Lin, F. Zhou et al., “Ti–Ga binary alloys developed as potential dental materials,” Materials Science and Engineering: C, vol. 34, pp. 474–483, 2014. View at Publisher · View at Google Scholar
  28. D. Eliopoulos, S. Zinelis, and T. Papadopoulos, “The effect of investment material type on the contamination zone and mechanical properties of commercially pure titanium castings,” Journal of Prosthetic Dentistry, vol. 94, no. 6, pp. 539–548, 2005. View at Publisher · View at Google Scholar · View at Scopus
  29. Y. Guilin, L. Nan, L. Yousheng, and W. Yining, “The effects of different types of investments on the alpha-case layer of titanium castings,” Journal of Prosthetic Dentistry, vol. 97, no. 3, pp. 157–164, 2007. View at Publisher · View at Google Scholar · View at Scopus
  30. J. Li, X. M. Gu, X. T. Chen, J. J. Fan, and J. Wang, “Changes in surface reaction layers during titanium casting using different investments,” Caribbean Journal of Theological Education and Research, vol. 16, pp. 4649–4653, 2012. View at Google Scholar
  31. J. C. Fonseca, G. E. P. Henriques, L. C. Sobrinho, and M. F. De Góes, “Stress-relieving and porcelain firing cycle influence on marginal fit of commercially pure titanium and titanium-aluminum-vanadium copings,” Dental Materials, vol. 19, no. 7, pp. 686–691, 2003. View at Publisher · View at Google Scholar · View at Scopus
  32. K. Kuhn, S. Ostertag, M. Ostertag, M. H. Walter, R. G. Luthardt, and H. Rudolph, “Comparison of an analog and digital quantitative and qualitative analysis for the fit of dental copings,” Computers in Biology and Medicine, vol. 57, pp. 32–41, 2015. View at Publisher · View at Google Scholar · View at Scopus
  33. Z. Zhang, Y. Aida, Y. Tamaki, Y. Hotta, and T. Miyazaki, “Experimental binder-free investments reused to cast dental precious alloys,” Dental Materials Journal, vol. 25, no. 3, pp. 553–559, 2006. View at Publisher · View at Google Scholar · View at Scopus
  34. S. Yagi, Z. Zhang, Y. Aida, Y. Hotta, Y. Tamaki, and T. Miyazaki, “Soda-lime glass as a binder in reusable experimental investment for dental castings,” Dental Materials Journal, vol. 30, no. 5, pp. 611–615, 2011. View at Publisher · View at Google Scholar · View at Scopus