Table of Contents Author Guidelines Submit a Manuscript
BioMed Research International
Volume 2017, Article ID 7847930, 8 pages
https://doi.org/10.1155/2017/7847930
Research Article

An Evaluation of the Gap Sizes of 3-Unit Fixed Dental Prostheses Milled from Sintering Metal Blocks

Department of Dental Technology, Daejeon Health Institute of Technology, 21 Chungjeong-ro, Dong-gu, Daejeon 34504, Republic of Korea

Correspondence should be addressed to Jae-Kwan Jung; rk.ca.tih@gnujkj

Received 30 August 2016; Revised 29 November 2016; Accepted 4 January 2017; Published 29 January 2017

Academic Editor: Satoshi Imazato

Copyright © 2017 Jae-Kwan Jung. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

Jae-Kwan Jung, “An Evaluation of the Gap Sizes of 3-Unit Fixed Dental Prostheses Milled from Sintering Metal Blocks,” BioMed Research International, vol. 2017, Article ID 7847930, 8 pages, 2017. https://doi.org/10.1155/2017/7847930.