Table of Contents Author Guidelines Submit a Manuscript
BioMed Research International
Volume 2017, Article ID 7847930, 8 pages
https://doi.org/10.1155/2017/7847930
Research Article

An Evaluation of the Gap Sizes of 3-Unit Fixed Dental Prostheses Milled from Sintering Metal Blocks

Department of Dental Technology, Daejeon Health Institute of Technology, 21 Chungjeong-ro, Dong-gu, Daejeon 34504, Republic of Korea

Correspondence should be addressed to Jae-Kwan Jung; rk.ca.tih@gnujkj

Received 30 August 2016; Revised 29 November 2016; Accepted 4 January 2017; Published 29 January 2017

Academic Editor: Satoshi Imazato

Copyright © 2017 Jae-Kwan Jung. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. S. S. Azer, G. M. Ayash, W. M. Johnston, M. F. Khalil, and S. F. Rosenstiel, “Effect of esthetic core shades on the final color of IPS Empress all-ceramic crowns,” The Journal of Prosthetic Dentistry, vol. 96, no. 6, pp. 397–401, 2006. View at Publisher · View at Google Scholar · View at Scopus
  2. J. Pisani-Proenca, M. C. G. Erhardt, L. F. Valandro et al., “Influence of ceramic surface conditioning and resin cements on microtensile bond strength to a glass ceramic,” The Journal of Prosthetic Dentistry, vol. 96, no. 6, pp. 412–417, 2006. View at Publisher · View at Google Scholar · View at Scopus
  3. K.-B. Kim, W.-C. Kim, H.-Y. Kim, and J.-H. Kim, “An evaluation of marginal fit of three-unit fixed dental prostheses fabricated by direct metal laser sintering system,” Dental Materials, vol. 29, no. 7, pp. e91–e96, 2013. View at Publisher · View at Google Scholar · View at Scopus
  4. L. V. Foster, “Failed conventional bridge work from general dental practice: clinical aspects and treatment needs of 142 cases,” British Dental Journal, vol. 168, no. 5, pp. 199–201, 1990. View at Publisher · View at Google Scholar · View at Scopus
  5. S. H. Hung, K.-S. Hung, J. D. Eick, and R. P. Chappell, “Marginal fit of porcelain-fused-to-metal and two types of ceramic crown,” The Journal of Prosthetic Dentistry, vol. 63, no. 1, pp. 26–31, 1990. View at Publisher · View at Google Scholar · View at Scopus
  6. ANSI/ADA, ANSI/ADA Specification No. 96 d Dental Water-based Cements, 2012.
  7. J. W. McLean and J. A. von Fraunhofer, “The estimation of cement film thickness by an in vivo technique,” British Dental Journal, vol. 131, no. 3, pp. 107–111, 1971. View at Publisher · View at Google Scholar · View at Scopus
  8. K. J. Anusavice, Phillips' Science of Dental Materials. 11th ed, W.B. Saunders, Phialdelphia, Pa, USA, 2003.
  9. C. Ural, Y. Burgaz, and D. Saraç, “In vitro evaluation of marginal adaptation in five ceramic restoration fabricating techniques,” Quintessence International, vol. 41, no. 7, pp. 585–590, 2010. View at Google Scholar · View at Scopus
  10. E. Gonzalo, M. J. Suárez, B. Serrano, and J. F. L. Lozano, “A comparison of the marginal vertical discrepancies of zirconium and metal ceramic posterior fixed dental prostheses before and after cementation,” The Journal of Prosthetic Dentistry, vol. 102, no. 6, pp. 378–384, 2009. View at Publisher · View at Google Scholar · View at Scopus
  11. M. R. Baig, K. B.-C. Tan, and J. I. Nicholls, “Evaluation of the marginal fit of a zirconia ceramic computer-aided machined (CAM) crown system,” The Journal of Prosthetic Dentistry, vol. 104, no. 4, pp. 216–227, 2010. View at Publisher · View at Google Scholar · View at Scopus
  12. K.-B. Kim, J.-H. Kim, W.-C. Kim, H.-Y. Kim, and J.-H. Kim, “Evaluation of the marginal and internal gap of metal-ceramic crown fabricated with a selective laser sintering technology: two- and three-dimensional replica techniques,” The Journal of Advanced Prosthodontics, vol. 5, no. 2, pp. 179–186, 2013. View at Publisher · View at Google Scholar · View at Scopus
  13. Y. Ucar, T. Akova, M. S. Akyil, and W. A. Brantley, “Internal fit evaluation of crowns prepared using a new dental crown fabrication technique: laser-sintered Co-Cr crowns,” The Journal of Prosthetic Dentistry, vol. 102, no. 4, pp. 253–259, 2009. View at Publisher · View at Google Scholar · View at Scopus
  14. A. Örtorp, D. Jönsson, A. Mouhsen, and P. Vult von Steyern, “The fit of cobalt-chromium three-unit fixed dental prostheses fabricated with four different techniques: a comparative in vitro study,” Dental Materials, vol. 27, no. 4, pp. 356–363, 2011. View at Publisher · View at Google Scholar · View at Scopus
  15. K. Quante, K. Ludwig, and M. Kern, “Marginal and internal fit of metal-ceramic crowns fabricated with a new laser melting technology,” Dental Materials, vol. 24, no. 10, pp. 1311–1315, 2008. View at Publisher · View at Google Scholar · View at Scopus
  16. L. Zeng, Y. Zhang, Z. Liu, and B. Wei, “Effects of repeated firing on the marginal accuracy of Co-Cr copings fabricated by selective laser melting,” The Journal of Prosthetic Dentistry, vol. 113, no. 2, pp. 135–139, 2015. View at Publisher · View at Google Scholar · View at Scopus
  17. H. Nesse, D. M. Å. Ulstein, M. M. Vaage, and M. Øilo, “Internal and marginal fit of cobalt-chromium fixed dental prostheses fabricated with 3 different techniques,” The Journal of Prosthetic Dentistry, vol. 114, no. 5, pp. 686–692, 2015. View at Publisher · View at Google Scholar · View at Scopus
  18. W. B. Eames, S. J. O'Neal, J. Monteiro, C. Miller, J. D. Roan Jr., and K. S. Cohen, “Techniques to improve the seating of castings,” The Journal of the American Dental Association, vol. 96, no. 3, pp. 432–437, 1978. View at Publisher · View at Google Scholar · View at Scopus
  19. S.-H. Cho, W.-G. Chang, B.-S. Lim, and Y.-K. Lee, “Effect of die spacer thickness on shear bond strength of porcelain laminate veneers,” The Journal of Prosthetic Dentistry, vol. 95, no. 3, pp. 201–208, 2006. View at Publisher · View at Google Scholar · View at Scopus
  20. Y. Kokubo, M. Tsumita, T. Kano, S. Sakurai, and S. Fukushima, “Clinical marginal and internal gaps of zirconia all-ceramic crowns,” Journal of Prosthodontic Research, vol. 55, no. 1, pp. 40–43, 2011. View at Publisher · View at Google Scholar · View at Scopus
  21. J. R. Holmes, S. C. Bayne, G. A. Holland, and W. D. Sulik, “Considerations in measurement of marginal fit,” The Journal of Prosthetic Dentistry, vol. 62, no. 4, pp. 405–408, 1989. View at Publisher · View at Google Scholar · View at Scopus
  22. M. Laurent, P. Scheer, J. Dejou, and G. Laborde, “Clinical evaluation of the marginal fit of cast crowns—validation of the silicone replica method,” Journal of Oral Rehabilitation, vol. 35, no. 2, pp. 116–122, 2008. View at Publisher · View at Google Scholar · View at Scopus
  23. J.-H. Kim, S. Oh, and S.-H. Uhm, “Effect of the crystallization process on the marginal and internal gaps of lithium disilicate CAD/CAM crowns,” BioMed Research International, vol. 2016, Article ID 8635483, 6 pages, 2016. View at Publisher · View at Google Scholar · View at Scopus
  24. F. M. Milan, S. Consani, L. Correr Sobrinho, M. A. C. Sinhoreti, M. D. Sousa-Neto, and J. C. Knowles, “Influence of casting methods on marginal and internal discrepancies of complete cast crowns,” Brazilian Dental Journal, vol. 15, no. 2, pp. 127–132, 2004. View at Google Scholar · View at Scopus
  25. R. Blackman, R. Baez, and N. Barghi, “Marginal accuracy and geometry of cast titanium copings,” The Journal of Prosthetic Dentistry, vol. 67, no. 4, pp. 435–440, 1992. View at Publisher · View at Google Scholar · View at Scopus
  26. J. R. Gavelis, J. D. Morency, E. D. Riley, and R. B. Sozio, “The effect of various finish line preparations on the marginal seal and occlusal seat of full crown preparations,” Journal of Prosthetic Dentistry, vol. 92, no. 1, pp. 1–7, 2004. View at Publisher · View at Google Scholar · View at Scopus
  27. S. Oruç and Y. Tulunoglu, “Fit of titanium and a base metal alloy metal-ceramic crown,” The Journal of prosthetic dentistry, vol. 83, no. 3, pp. 314–318, 2000. View at Publisher · View at Google Scholar · View at Scopus
  28. F. Beuer, H. Aggstaller, D. Edelhoff, W. Gernet, and J. Sorensen, “Marginal and internal fits of fixed dental prostheses zirconia retainers,” Dental Materials, vol. 25, no. 1, pp. 94–102, 2009. View at Publisher · View at Google Scholar · View at Scopus
  29. S. Witkowski, F. Komine, and T. Gerds, “Marginal accuracy of titanium copings fabricated by casting and CAD/CAM techniques,” The Journal of Prosthetic Dentistry, vol. 96, no. 1, pp. 47–52, 2006. View at Publisher · View at Google Scholar · View at Scopus
  30. P. L. Tan, D. G. Gratton, A. M. Diaz-Arnold, and D. C. Holmes, “An in vitro comparison of vertical marginal gaps of CAD/CAM titanium and conventional cast restorations,” Journal of Prosthodontics, vol. 17, no. 5, pp. 378–383, 2008. View at Publisher · View at Google Scholar · View at Scopus