Table of Contents Author Guidelines Submit a Manuscript
BioMed Research International
Volume 2017, Article ID 9732136, 7 pages
https://doi.org/10.1155/2017/9732136
Research Article

Histological Evidence of the Osseointegration of Fractured Direct Metal Laser Sintering Implants Retrieved after 5 Years of Function

1Department of Medicine and Surgery, Dental School, University of Varese, 21100 Varese, Italy
2Department of Dental Sciences, Vita and Salute University S. Raffaele, 20132 Milan, Italy
3Department of Oral and Biotechnological Science, University G. D’Annunzio, 66013 Chieti, Italy

Correspondence should be addressed to Francesco Mangano; moc.liamg@onagnamodiugocsecnarf

Received 10 March 2017; Accepted 30 July 2017; Published 27 August 2017

Academic Editor: Despina Deligianni

Copyright © 2017 Francesco Mangano et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. D. Buser, V. Chappuis, U. C. Belser, and S. Chen, “Implant placement post extraction in esthetic single tooth sites: when immediate, when early, when late?” Periodontology 2000, vol. 73, no. 1, pp. 84–102, 2017. View at Publisher · View at Google Scholar · View at Scopus
  2. V. Moraschini and E. Porto Barboza, “Immediate versus conventional loaded single implants in the posterior mandible: a meta-analysis of randomized controlled trials,” International Journal of Oral and Maxillofacial Surgery, vol. 45, no. 1, pp. 85–92, 2016. View at Publisher · View at Google Scholar
  3. J. Parelli and S. Abramowicz, “Immediate placement and immediate loading: surgical technique and clinical pearls,” Dental Clinics of North America, vol. 59, no. 2, pp. 345–355, 2015. View at Publisher · View at Google Scholar · View at Scopus
  4. B. R. Chrcanovic, T. Albrektsson, and A. Wennerberg, “Immediately loaded non-submerged versus delayed loaded submerged dental implants: a meta-analysis,” International Journal of Oral and Maxillofacial Surgery, vol. 44, no. 4, pp. 493–506, 2015. View at Publisher · View at Google Scholar · View at Scopus
  5. P. I. Branemark, B. O. Hansson, R. Adell et al., “Osseointegrated implants in the treatment of the edentulous jaw. Experience from a 10-year period,” Scandinavian Journal of Plastic and Reconstructive Surgery, vol. 16, no. 1, pp. 1–132, 1977. View at Google Scholar · View at Scopus
  6. N. Lioubavina-Hack, N. P. Lang, and T. Karring, “Significance of primary stability for osseointegration of dental implants,” Clinical Oral Implants Research, vol. 17, no. 3, pp. 244–250, 2006. View at Publisher · View at Google Scholar · View at Scopus
  7. G. J. P. L. de Oliveira, F. C. Leite, A. E. Pontes, C. E. Sakakura, and E. Marcantonio, “Comparison of the primary and secondary stability of implants with anodized surfaces and implants treated by acids: A split-mouth randomized controlled clinical trial,” International Journal of Oral and Maxillofacial Implants, vol. 31, no. 1, pp. 186–190, 2016. View at Publisher · View at Google Scholar · View at Scopus
  8. O. Geckili, H. Bilhan, and T. Bilgin, “A 24-week prospective study comparing the stability of titanium dioxide grit-blasted dental implants with and without fluoride treatment,” International Journal of Oral and Maxillofacial Implants, vol. 24, no. 4, pp. 684–688, 2009. View at Google Scholar · View at Scopus
  9. F. G. Mangano, G. Iezzi, J. A. Shibli et al., “Early bone formation around immediately loaded implants with nanostructured calcium-incorporated and machined surface: a randomized, controlled histologic and histomorphometric study in the human posterior maxilla,” Clinical Oral Investigations, 2017. View at Publisher · View at Google Scholar
  10. D. A. Hollander, M. Von Walter, T. Wirtz et al., “Structural, mechanical and in vitro characterization of individually structured Ti-6Al-4V produced by direct laser forming,” Biomaterials, vol. 27, no. 7, pp. 955–963, 2006. View at Publisher · View at Google Scholar · View at Scopus
  11. T. Traini, C. Mangano, R. L. Sammons, F. Mangano, A. Macchi, and A. Piattelli, “Direct laser metal sintering as a new approach to fabrication of an isoelastic functionally graded material for manufacture of porous titanium dental implants,” Dental Materials, vol. 24, no. 11, pp. 1525–1533, 2008. View at Publisher · View at Google Scholar · View at Scopus
  12. C. Mangano, M. Raspanti, T. Traini, A. Piattelli, and R. Sammons, “Stereo imaging and cytocompatibility of a model dental implant surface formed by direct laser fabrication,” Journal of Biomedical Materials Research Part A, vol. 88, no. 3, pp. 823–831, 2009. View at Publisher · View at Google Scholar · View at Scopus
  13. F. Mangano, L. Chambrone, R. van Noort, C. Miller, P. Hatton, and C. Mangano, “Direct metal laser sintering titanium dental implants: a review of the current literature,” International Journal of Biomaterials, vol. 2014, Article ID 461534, 11 pages, 2014. View at Publisher · View at Google Scholar · View at Scopus
  14. F. G. Mangano, J. T. Pires, J. A. Shibli et al., “Early bone response to dual acid-etched and machined dental implants placed in the posterior maxilla: A Histologic and Histomorphometric Human Study,” Implant Dentistry, 2016. View at Publisher · View at Google Scholar
  15. J. A. Shibli, C. Mangano, F. Mangano et al., “Bone-to-implant contact around immediately loaded direct laser metal-forming transitional implants in human posterior maxilla,” Journal of Periodontology, vol. 84, no. 6, pp. 732–737, 2013. View at Publisher · View at Google Scholar · View at Scopus
  16. C. Mangano, A. Piattelli, M. Raspanti et al., “Scanning electron microscopy (SEM) and X-ray dispersive spectrometry evaluation of direct laser metal sintering surface and human bone interface: A case series,” Lasers in Medical Science, vol. 26, no. 1, pp. 133–138, 2011. View at Publisher · View at Google Scholar · View at Scopus
  17. C. Mangano, A. Piattelli, S. d'Avila et al., “Early human bone response to laser metal sintering surface topography: a histologic report,” The Journal of Oral Implantology, vol. 36, no. 2, pp. 91–96, 2010. View at Publisher · View at Google Scholar · View at Scopus
  18. C. Mangano, A. Piattelli, F. Mangano et al., “Histological and synchrotron radiation-based computed microtomography study of 2 human-retrieved direct laser metal formed titanium implants,” Implant Dentistry, vol. 22, no. 2, pp. 175–181, 2013. View at Publisher · View at Google Scholar · View at Scopus
  19. F. G. Mangano, P. Mastrangelo, F. Luongo, A. Blay, S. Tunchel, and C. Mangano, “Aesthetic outcome of immediately restored single implants placed in extraction sockets and healed sites of the anterior maxilla: a retrospective study on 103 patients with 3 years of follow-up,” Clinical Oral Implants Research, 2016. View at Publisher · View at Google Scholar · View at Scopus
  20. F. G. Mangano, A. Caprioglio, L. Levrini, D. Farronato, P. A. Zecca, and C. Mangano, “Immediate loading of mandibular overdentures supported by one-piece, direct metal laser sintering mini-implants: a short-term prospective clinical study,” Journal of Periodontology, vol. 86, no. 2, pp. 192–200, 2015. View at Publisher · View at Google Scholar · View at Scopus
  21. G. Iezzi, A. Piattelli, C. Mangano et al., “Periimplant bone response in human-retrieved, clinically stable, successful, and functioning dental implants after a long-term loading period: A report of 17 cases from 4 to 20 years,” Implant Dentistry, vol. 25, no. 3, pp. 380–386, 2016. View at Publisher · View at Google Scholar · View at Scopus
  22. C. Mangano, A. Piattelli, C. Mortellaro, F. Mangano, V. Perrotti, and G. Iezzi, “Evaluation of peri-implant bone response in implants retrieved for fracture after more than 20 years of loading: a case series,” Journal of Oral Implantology, vol. 41, no. 4, pp. 414–418, 2015. View at Publisher · View at Google Scholar · View at Scopus
  23. J. A. Shibli, J. T. Pires, and A. Piattelli, “Impact of different implant surfaces topographies on peri-implant tissues: an update of current available data on dental implants retrieved from human jaws,” Current Pharmaceutical Biotechnology, vol. 18, no. 1, pp. 76–84, 2017. View at Publisher · View at Google Scholar
  24. J. A. Shibli, C. Mangano, and S. D'Avila, “Influence of direct laser fabrication implant topography on type IV bone: a histomorphometric study in humans,” Journal of Biomedical Materials Research Part A, vol. 93, no. 2, pp. 607–614, 2010. View at Publisher · View at Google Scholar · View at Scopus
  25. L. Witek, C. Marin, R. Granato et al., “Characterization and in vivo evaluation of laser sintered dental endosseous implants in dogs,” Journal of Biomedical Materials Research Part B Applied Biomaterials, vol. 100, no. 6, pp. 1566–1573, 2012. View at Publisher · View at Google Scholar · View at Scopus
  26. D. J. Cohen, A. Cheng, K. Sahingur et al., “Performance of laser sintered Ti-6Al-4V implants with bone-inspired porosity and micro/nanoscale surface roughness in the rabbit femur,” Biomedical Materials, vol. 12, no. 2, Article ID 025021, 2017. View at Publisher · View at Google Scholar
  27. A. Cheng, D. J. Cohen, B. D. Boyan, and Z. Schwartz, “Laser-Sintered Constructs with Bio-inspired Porosity and Surface Micro/Nano-Roughness Enhance Mesenchymal Stem Cell Differentiation and Matrix Mineralization In Vitro,” Calcified Tissue International, vol. 99, no. 6, pp. 625–637, 2016. View at Publisher · View at Google Scholar · View at Scopus
  28. M. Bowers, D. Yoo, C. Marin et al., “Surface characterization and In Vivo evaluation of laser sintered and machined implants followed by resorbable-blasting media process: A study in sheep,” Medicina Oral, Patologia Oral y Cirugia Bucal, vol. 21, no. 2, pp. e206–e213, 2016. View at Publisher · View at Google Scholar · View at Scopus
  29. C. Mangano, A. de Rosa, and V. Desiderio, “The osteoblastic differentiation of dental pulp stem cells and bone formation on different titanium surface textures,” Biomaterials, vol. 31, no. 13, pp. 3543–3551, 2010. View at Publisher · View at Google Scholar · View at Scopus
  30. S. Amin Yavari, R. Wauthle, J. Van Der Stok et al., “Fatigue behavior of porous biomaterials manufactured using selective laser melting,” Materials Science and Engineering C, vol. 33, no. 8, pp. 4849–4858, 2013. View at Publisher · View at Google Scholar · View at Scopus