Table of Contents Author Guidelines Submit a Manuscript
BioMed Research International
Volume 2018 (2018), Article ID 2143906, 8 pages
https://doi.org/10.1155/2018/2143906
Research Article

Influence of Material Selection on the Marginal Accuracy of CAD/CAM-Fabricated Metal- and All-Ceramic Single Crown Copings

1Department of Prosthodontics, University Medical Center Goettingen, Robert-Koch-Str. 40, 37075 Goettingen, Germany
2Private Practice, Geleitstr. 68, 63456 Hanau, Germany

Correspondence should be addressed to Matthias Rödiger; ed.gdwg@gideorm

Received 4 December 2017; Accepted 14 February 2018; Published 22 March 2018

Academic Editor: Konstantinos Michalakis

Copyright © 2018 Matthias Rödiger et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

Matthias Rödiger, Lea Schneider, and Sven Rinke, “Influence of Material Selection on the Marginal Accuracy of CAD/CAM-Fabricated Metal- and All-Ceramic Single Crown Copings,” BioMed Research International, vol. 2018, Article ID 2143906, 8 pages, 2018. doi:10.1155/2018/2143906