Table of Contents Author Guidelines Submit a Manuscript
BioMed Research International
Volume 2018 (2018), Article ID 2876135, 12 pages
https://doi.org/10.1155/2018/2876135
Research Article

Efficacy of rhBMP-2 Loaded PCL/β-TCP/bdECM Scaffold Fabricated by 3D Printing Technology on Bone Regeneration

1Department of Prosthodontics, Dental Research Institute, Institute of Translational Dental Sciences, BK21 PLUS Project, School of Dentistry, Pusan National University, Yangsan 50612, Republic of Korea
2Department of Mechanical Engineering, Korea Polytechnic University, Siheung 15073, Republic of Korea
3Department of Plastic and Reconstructive Surgery, School of Medicine, Kyungpook National University, Daegu 41944, Republic of Korea
4Research Institute, T&R Biofab Co., Ltd., Siheung 15073, Republic of Korea
5Department of Veterinary Surgery, College of Veterinary Medicine, Chonnam National University, Gwangju 61186, Republic of Korea

Correspondence should be addressed to Jung-Bo Huh; rk.ca.nasup@bjhuh

Received 30 October 2017; Revised 27 December 2017; Accepted 8 January 2018; Published 27 February 2018

Academic Editor: Oliver B. Betz

Copyright © 2018 Eun-Bin Bae et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. F. J. O'Brein, “Biomaterials & scaffolds for tissue engineering,” Materials Today, vol. 14, no. 3, pp. 88–95, 2011. View at Publisher · View at Google Scholar
  2. C.-H. Chang, C.-Y. Lin, F.-H. Liu et al., “3D printing bioceramic porous scaffolds with good mechanical property and cell affinity,” PLoS ONE, vol. 10, no. 11, Article ID e0143713, 2015. View at Publisher · View at Google Scholar · View at Scopus
  3. G. Rasperini, S. P. Pilipchuk, C. L. Flanagan et al., “3D-printed bioresorbable scaffold for periodontal repair,” Journal of Dental Research, vol. 94, no. 9, pp. 153S–157S, 2015. View at Publisher · View at Google Scholar · View at Scopus
  4. E. Sachlos and J. T. Czernuszka, “Making tissue engineering scaffolds work. Review: the application of solid freeform fabrication technology to the production of tissue engineering scaffolds,” European Cells & Materials, vol. 5, no. 29, pp. 39-40, 2003. View at Publisher · View at Google Scholar · View at Scopus
  5. J.-H. Shim, J.-Y. Won, J.-H. Park et al., “Effects of 3D-printed polycaprolactone/β-tricalcium phosphate membranes on guided bone regeneration,” International Journal of Molecular Sciences, vol. 18, no. 5, article no. 899, 2017. View at Publisher · View at Google Scholar · View at Scopus
  6. J.-H. Shim, T.-S. Moon, M.-J. Yun et al., “Stimulation of healing within a rabbit calvarial defect by a PCL/ PLGA scaffold blended with TCP using solid freeform fabrication technology,” Journal of Materials Science: Materials in Medicine, vol. 23, no. 12, pp. 2993–3002, 2012. View at Publisher · View at Google Scholar · View at Scopus
  7. A. A. Sawyer, S. J. Song, E. Susanto et al., “The stimulation of healing within a rat calvarial defect by mPCL-TCP/collagen scaffolds loaded with rhBMP-2,” Biomaterials, vol. 30, no. 13, pp. 2479–2488, 2009. View at Publisher · View at Google Scholar · View at Scopus
  8. J.-H. Shim, J.-B. Huh, J. Y. Park et al., “Fabrication of blended polycaprolactone/poly (Lactic-Co-Glycolic Acid)/β-tricalcium phosphate thin membrane using solid freeform fabrication technology for guided bone regeneration,” Tissue Engineering Part A, vol. 19, no. 3-4, pp. 317–328, 2012. View at Publisher · View at Google Scholar · View at Scopus
  9. K.-S. Hwang, J.-W. Choi, J.-H. Kim et al., “Comparative efficacies of collagen-based 3D printed PCL/PLGA/β-TCP composite block bone grafts and biphasic calcium phosphate bone substitute for bone regeneration,” Materials , vol. 10, no. 4, article no. 421, 2017. View at Publisher · View at Google Scholar · View at Scopus
  10. S.-W. Kang, J.-S. Kim, K.-S. Park et al., “Surface modification with fibrin/hyaluronic acid hydrogel on solid-free form-based scaffolds followed by BMP-2 loading to enhance bone regeneration,” Bone, vol. 48, no. 2, pp. 298–306, 2011. View at Publisher · View at Google Scholar · View at Scopus
  11. T. L. Sellaro, A. Ranade, D. M. Faulk et al., “Maintenance of human hepatocyte function in vitro by liver-derived extracellular matrix gels,” Tissue Engineering Part: A, vol. 16, no. 3, pp. 1075–1082, 2009. View at Publisher · View at Google Scholar · View at Scopus
  12. F. Pati, J. Jang, D.-H. Ha et al., “Printing three-dimensional tissue analogues with decellularized extracellular matrix bioink,” Nature Communications, vol. 5, article 3935, 2014. View at Publisher · View at Google Scholar · View at Scopus
  13. T. A. Einhorn, J. M. Lane, A. H. Burstein, C. R. Kopman, and V. J. Vigorita, “The healing of segmental bone defects induced by demineralized bone matrix. A radiographic and biomechanical study,” The Journal of Bone & Joint Surgery, vol. 66, no. 2, pp. 274–279, 1984. View at Publisher · View at Google Scholar · View at Scopus
  14. M. E. Bolander and G. Balian, “The use of demineralized bone matrix in the repair of segmental defects. Augmentation with extracted matrix proteins and a comparison with autologous grafts,” The Journal of Bone & Joint Surgery, vol. 68, no. 8, pp. 1264–1274, 1986. View at Publisher · View at Google Scholar · View at Scopus
  15. E. Gruskin, B. A. Doll, F. W. Futrell, J. P. Schmitz, and J. O. Hollinger, “Demineralized bone matrix in bone repair: history and use,” Advanced Drug Delivery Reviews, vol. 64, no. 12, pp. 1063–1077, 2012. View at Publisher · View at Google Scholar · View at Scopus
  16. D. C. Markel, S. T. Guthrie, B. Wu, Z. Song, and P. H. Wooley, “Characterization of the inflammatory response to four commercial bone graft substitutes using a murine biocompatibility model,” Journal of Inflammation Research, vol. 5, no. 1, pp. 13–18, 2012. View at Publisher · View at Google Scholar · View at Scopus
  17. M. J. Sawkins, W. Bowen, P. Dhadda et al., “Hydrogels derived from demineralized and decellularized bone extracellular matrix,” Acta Biomaterialia, vol. 9, no. 8, pp. 7865–7873, 2013. View at Publisher · View at Google Scholar · View at Scopus
  18. W.-G. La, J. Jang, B. S. Kim, M. S. Lee, D.-W. Cho, and H. S. Yang, “Systemically replicated organic and inorganic bony microenvironment for new bone formation generated by a 3D printing technology,” RSC Advances, vol. 6, no. 14, pp. 11546–11553, 2016. View at Publisher · View at Google Scholar · View at Scopus
  19. K. Jakab, C. Norotte, F. Marga, K. Murphy, G. Vunjak-Novakovic, and G. Forgacs, “Tissue engineering by self-assembly and bio-printing of living cells,” Biofabrication, vol. 2, no. 2, Article ID 022001, 2010. View at Publisher · View at Google Scholar · View at Scopus
  20. P. C. Bessa, M. Casal, and R. L. Reis, “Bone morphogenetic proteins in tissue engineering: the road from the laboratory to the clinic. Part I (basic concepts),” Journal of Tissue Engineering and Regenerative Medicine, vol. 2, no. 1, pp. 1–13, 2008. View at Publisher · View at Google Scholar · View at Scopus
  21. P. C. Bessa, M. Casal, and R. L. Reis, “Bone morphogenetic proteins in tissue engineering: the road from laboratory to clinic, part II (BMP delivery),” Journal of Tissue Engineering and Regenerative Medicine, vol. 2, no. 2-3, pp. 81–96, 2008. View at Publisher · View at Google Scholar · View at Scopus
  22. M. Laub, T. Seul, E. Schmachtenberg, and H. P. Jennissen, “Molecular modelling of bone morphogenetic protein-2 (BMP-2) by 3D-rapid prototyping,” Materialwissenschaft und Werkstofftechnik, vol. 32, no. 12, pp. 926–930, 2001. View at Publisher · View at Google Scholar · View at Scopus
  23. P. J. Boyne, L. C. Lilly, R. E. Marx et al., “De novo bone induction by recombinant human bone morphogenetic protein-2 (rhBMP-2) in maxillary sinus floor augmentation,” Journal of Oral and Maxillofacial Surgery, vol. 63, no. 12, pp. 1693–1707, 2005. View at Publisher · View at Google Scholar · View at Scopus
  24. U. M. Wikesjö, R. G. Sorensen, and J. M. Wozney, “Augmentation of alveolar bone and dental implant osseointegration: Clinical implication of studies with rhBMP-2. A comprehensive review,” The Journal of Bone & Joint Surgery, vol. 83, no. 1-2, pp. S136–S145, 2001. View at Google Scholar · View at Scopus
  25. S. R. Winn, H. Uludag, and J. O. Hollinger, “Sustained release emphasizing recombinant human bone morphogenetic protein-2,” Advanced Drug Delivery Reviews, vol. 31, no. 3, pp. 303–318, 1998. View at Publisher · View at Google Scholar · View at Scopus
  26. T. J. Sigurdsson, L. Nygaard, D. N. Tatakis et al., “Periodontal repair in dogs: evaluation of rhBMP-2 carriers,” International Journal of Periodontics & Restorative Dentistry, vol. 16, no. 6, pp. 525–537, 1996. View at Google Scholar · View at Scopus
  27. S. H. Lee, J. Y. Jo, M. J. Yun, Y. C. Jeon, J. B. Huh, and C. M. Jeong, “Effect of immobilization of the recombinant human bone morphogenetic protein 2 (rhBMP-2) on anodized implants coated with heparin for improving alveolar ridge augmentation in beagle dogs: radiographic observations,” The Journal of Korean Academy of Prosthodontics, vol. 51, no. 4, pp. 307–314, 2013. View at Publisher · View at Google Scholar
  28. E. Brunner and F. Langer, “Nonparametric analysis of ordered categorical data in designs with longitudinal observations and small sample sizes,” Biometrical Journal, vol. 42, no. 6, pp. 663–675, 2000. View at Publisher · View at Google Scholar · View at MathSciNet · View at Scopus
  29. J. Y. Kim, J. J. Yoon, E. K. Park, D. S. Kim, S.-Y. Kim, and D.-W. Cho, “Cell adhesion and proliferation evaluation of SFF-based biodegradable scaffolds fabricated using a multi-head deposition system,” Biofabrication, vol. 1, no. 1, Article ID 015002, 2009. View at Publisher · View at Google Scholar · View at Scopus
  30. T. Adachi, Y. Osako, M. Tanaka, M. Hojo, and S. J. Hollister, “Framework for optimal design of porous scaffold microstructure by computational simulation of bone regeneration,” Biomaterials, vol. 27, no. 21, pp. 3964–3972, 2006. View at Publisher · View at Google Scholar · View at Scopus
  31. S. L. Ishaug-Riley, G. M. Crane-Kruger, M. J. Yaszemski, and A. G. Mikos, “Three-dimensional culture of rat calvarial osteoblasts in porous biodegradable polymers,” Biomaterials, vol. 19, no. 15, pp. 1405–1412, 1998. View at Publisher · View at Google Scholar · View at Scopus
  32. R. Bettach, B. Guillaume, S. Taschieri, and M. Del Fabbro, “Clinical performance of a highly porous Beta-TCP as the grafting material for maxillary sinus augmentation,” Implant Dentistry, vol. 23, no. 3, pp. 357–364, 2014. View at Publisher · View at Google Scholar · View at Scopus
  33. D.-E. Seo, S. I. Jeong, J.-S. Park et al., “Preparation and characterization of AEMA Grafted PCL nanofibers using gamma-ray irradiation,” Polymer Korea, vol. 41, no. 1, pp. 143–150, 2017. View at Publisher · View at Google Scholar · View at Scopus
  34. X. Zhang, Q. Cai, H. Liu et al., “Calcium ion release and osteoblastic behavior of gelatin/beta-tricalcium phosphate composite nanofibers fabricated by electrospinning,” Materials Letters, vol. 73, pp. 172–175, 2012. View at Publisher · View at Google Scholar · View at Scopus
  35. K. Fujimura, K. Bessho, K. Kusumoto, Y. Ogawa, and T. Iizuka, “Experimental studies on bone inducing activity of composites of atelopeptide type I collagen as a carrier for ectopic osteoinduction by rhBMP-2,” Biochemical and Biophysical Research Communications, vol. 208, no. 1, pp. 316–322, 1995. View at Publisher · View at Google Scholar · View at Scopus
  36. Y. Liu, Y. Lu, X. Tian et al., “Segmental bone regeneration using an rhBMP-2-loaded gelatin/nanohydroxyapatite/fibrin scaffold in a rabbit model,” Biomaterials, vol. 30, no. 31, pp. 6276–6285, 2009. View at Publisher · View at Google Scholar · View at Scopus
  37. J. Kim, Y. Park, G. Tae et al., “Characterization of low-molecular-weight hyaluronic acid-based hydrogel and differential stem cell responses in the hydrogel microenvironments,” Journal of Biomedical Materials Research Part A, vol. 88, no. 4, pp. 967–975, 2009. View at Publisher · View at Google Scholar · View at Scopus
  38. J. H. Jo, S. W. Choi, J. W. Choi et al., “Effects of different rhBMP-2 release profiles in defect areas around dental implants on bone regeneration,” Biomedical Materials, vol. 10, no. 4, Article ID 045007, 2015. View at Publisher · View at Google Scholar · View at Scopus
  39. S. E. Kim, S. Song, Y. P. Yun et al., “The effect of immobilization of heparin and bone morphogenic protein-2 (BMP-2) to titanium surfaces on inflammation and osteoblast function,” Biomaterials, vol. 32, no. 2, pp. 366–373, 2011. View at Publisher · View at Google Scholar · View at Scopus
  40. W.-G. La, M. Jin, S. Park et al., “Delivery of bone morphogenetic protein-2 and substance P using graphene oxide for bone regeneration,” International Journal of Nanomedicine, vol. 9, no. 1, pp. 107–116, 2014. View at Publisher · View at Google Scholar · View at Scopus
  41. J. C. Bae, J. J. Lee, J. H. Shim et al., “Development and Assessment of a 3D-Printed Scaffold with rhBMP-2 for an Implant Surgical Guide Stent and Bone Graft Material: A Pilot Animal Study,” Materials, vol. 10, no. 12, 1434 pages, 2017. View at Publisher · View at Google Scholar