Table of Contents Author Guidelines Submit a Manuscript
BioMed Research International
Volume 2018 (2018), Article ID 4520636, 8 pages
https://doi.org/10.1155/2018/4520636
Research Article

Patient-Specific Surgical Implants Made of 3D Printed PEEK: Material, Technology, and Scope of Surgical Application

1Hand Surgery, Kantonsspital Baselland, Liestal, Switzerland
2Medical Additive Manufacturing Research Group, Department of Biomedical Engineering, University of Basel, Basel, Switzerland
3Department of Oral and Cranio-Maxillofacial Surgery, University Hospital Basel, Basel, Switzerland
4Apium Additive Technologies GmbH, Karlsruhe, Germany

Correspondence should be addressed to Philipp Honigmann; hc.lbsk@nnamginoh.ppilihp

Received 12 December 2017; Accepted 12 February 2018; Published 19 March 2018

Academic Editor: Berardo Di Matteo

Copyright © 2018 Philipp Honigmann et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

Philipp Honigmann, Neha Sharma, Brando Okolo, Uwe Popp, Bilal Msallem, and Florian M. Thieringer, “Patient-Specific Surgical Implants Made of 3D Printed PEEK: Material, Technology, and Scope of Surgical Application,” BioMed Research International, vol. 2018, Article ID 4520636, 8 pages, 2018. doi:10.1155/2018/4520636