(a)
(b)
(c)
(d)
(e)
(f)
Figure 2: Fabrication of the subperiosteal implant: (a) design of the implant; (b) prior to DMLS, the implant is fabricated in resin, with stereolithography, for better evaluation of the case, directly on the 3D printed model of the bone; (c) the implant is fabricated with DMLS; (d) scanning electron microscopy (SEM) image of the implant surface before the electroerosion treatment (x43); (e) scanning electron microscopy (SEM) image of the implant surface after the electroerosion treatment (x26); (f) the final aspect of the implant that is placed on the 3D printed model of the bone.