Abstract
Twenty years ago, Dr. François A. Auger, the founder of the Laboratory of Experimental Organogenesis (LOEX), introduced the self-assembly technique. This innovative technique relies on the ability of dermal fibroblasts to produce and assemble their own extracellular matrix, differing from all other tissue-engineering techniques that use preformed synthetic scaffolds. Nevertheless, the use of the self-assembly technique was limited for a long time due to its main drawbacks: time and cost. Recent scientific breakthroughs have addressed these limitations. New protocol modifications that aim at increasing the rate of extracellular matrix formation have been proposed to reduce the production costs and laboratory handling time of engineered tissues. Moreover, the introduction of vascularization strategies in vitro permits the formation of capillary-like networks within reconstructed tissues. These optimization strategies enable the large-scale production of inexpensive native-like substitutes using the self-assembly technique. These substitutes can be used to reconstruct three-dimensional models free of exogenous materials for clinical and fundamental applications.
1. Introduction
1.1. A Brief History of Tissue-Engineering Techniques
Throughout history, as the lifestyle of hunters and gatherers shifted towards a sedentary one, population demographics changed drastically. These changes in lifestyle combined with rich diets lead to an increased lifespan and the emergence of new diseases. The ageing population correlates with an increase in the prevalence of chronic disorders, which represent a large burden on the healthcare system. Chronic disorders can ultimately result in organ failure and may require organ replacement. However, the waiting lists for organ transplantation keep growing every year and the supply of organs does not meet the existing demand. To circumvent this extensive organ shortage, many efforts are being devoted to the reconstruction of tissue-engineered organs [1].
Tissue engineering represents an interesting alternative that aims at reconstructing biological substitutes for the replacement of damaged tissues and organs. This emerging discipline comprises several techniques, most of which use biomaterials such as preformed scaffolds that mimic the morphology of specific tissues and serve as an anchorage point for cells. These scaffolds consist of synthetic or biological materials [2]. Since the biomaterials used for scaffolds are different from the original components of the extracellular matrix (ECM) of the target organs, the differentiation of cells, stem cells in particular, is often partial or inadequate. Also, the use of biomaterials may trigger unknown side effects upon implantation in the human body.
New techniques have recently been developed to improve the functionality of biomaterials, such as the modification of their surface compounds [3], the introduction of bioprinting using bioink made of cells directly embedded in elements of the ECM [4–7], the use of decellularized tissue [8], and, finally, the reconstruction of autologous tissues using only patients’ cells.
1.2. The Self-Assembly Technique
The self-assembly technique is a method used to reconstruct tissues free of exogenous materials using only patients’ cells (Figure 1). The self-assembly technique relies on the ability of mesenchymal cells to secrete and assemble their own ECM. This approach originates from two main discoveries. Firstly, in 1972 ascorbate, an enzymatic cofactor of lysyl- and prolyl-hydroxylase, was shown to stimulate the production of type I collagen by human dermal fibroblasts [9]. Secondly, a key experiment followed in 1989 that demonstrated that fibroblasts can deposit enough ECM within few days to create a three-dimensional (3D) stromal sheet [10]. The stromal sheets can then be stacked or rolled in order to create a 3D organ substitute [11–13]. In the process of tissue reconstruction, cells are extracted from a patient’s biopsy and the stroma and the epithelium are enzymatically separated using thermolysin. Mesenchymal cells are extracted from the stroma using collagenase, while epithelial cells are extracted from the epithelium using trypsin. Mesenchymal cells are supplemented with 50 μg/ml of ascorbic acid throughout the cell culture time to enhance the formation of stromal sheets [11]. These newly formed stromal sheets can be easily peeled from the culture dish and stacked to create a cellularized scaffold. The assembled stroma is kept in culture for an additional week to allow further cell-matrix reorganization and layer fusion. Then, epithelial cells are seeded on the top of the construct and the culture is continued for an additional week in order to sustain epithelial cell proliferation and to obtain a full epithelial coverage of the apical surface. Thereafter, the equivalent is maintained for 21 days at an air-liquid interface to induce the maturation of the epithelium [12, 14] (Figure 2). Many different tissues have been produced using this technique such as skin, blood vessel, heart valve, cornea, adipose tissue, urologic tissue, and vaginal mucosa.
1.2.1. Skin
Reconstructed human skin substitutes produced by the self-assembly technique are clinically used for wound healing and burn treatments [15, 16]. The use of reconstructed autologous skin substitutes prevents graft rejection by the immune system. These engineered skin substitutes present a near-to-native architecture and show an adequately differentiated epidermis that is histologically and functionally similar to human skin [12, 17, 18]. Dermal fibroblasts and keratinocytes proliferate in vitro as some progenitor stem cells remain present amongst these cell populations [19].
In addition to the clinical potential of the skin substitutes reconstructed by the self-assembly technique, several other fundamental applications have been developed. Engineered substitutes of diseased skin have been produced using cells derived from patients with psoriasis [20]. These constructs can serve as a model for the study of the disease. Accordingly, reconstructed skin made using cells from patients with psoriasis has shown excessive growth and the aberrant differentiation of keratinocytes.
Since the cells used to reconstruct a tissue can be from either a healthy or a diseased donor, the effect of the different cell populations can be investigated individually to assess their effects on disease evolution [20, 21]. Furthermore, the skin substitutes produced with the self-assembly approach have been used to characterize cellular and molecular events involved in the pathogenesis of fibrotic diseases such as hypertrophic scars and scleroderma [22–24]. Also, in the early stage of amyotrophic lateral sclerosis (ALS), patients present with skin alterations. Reconstructed skin substitutes made using the biopsies of ALS patients have been used to identify disease-specific biomarkers which could serve as early diagnostic tools to monitor disease progression [25]. Hence, engineered skin substitutes represent a good alternative to the use of animal models for drug testing and disease modeling [20, 21, 26–28].
1.2.2. Blood Vessels
The self-assembly technique has also been applied to engineered human blood vessels [11, 29]. In order to reproduce the tubular shape of blood vessels, the flat stromal sheets produced by the self-assembly technique have been rolled around a cylindrical mandrel. To imitate the physiological layers of blood vessels, a stromal sheet composed of smooth muscle cells was rolled first, followed by a sheet produced by dermal fibroblasts [11, 30, 31] (Figure 3).
1.2.3. Heart Valves
Cardiovascular diseases represent an important problematic in developed countries and their treatment may necessitate heart valve replacement surgery. Rather than replacing a defective or diseased heart valve with a mechanical, cadaver, or animal valve, a lot of effort is being invested in the reconstruction of autologous tissue-engineered heart valves. Although this remains challenging work, heart valves produced using the self-assembly technique have been designed. These stentless bioprosthetic valves could offer a new alternative to artificial valves [32, 33].
1.2.4. Ocular Tissues
Corneal tissue engineering was developed in an attempt to cure corneal opacity. The self-assembly technique has also been applied to the generation of corneal substitutes [34]. These reconstructed substitutes have near-to-native stromal, endothelial, and epithelial histology. The differentiated epithelial layer has well defined basal and wing cells that expressed Na+/K+ ATPase α1 protein, keratin 3/12, and basic keratins [34]. The pattern of MMP gene expression involved in corneal wound healing has also been studied using this model [35]. Also, in an attempt to reconstruct intraocular lenses for the management of ocular diseases, recent studies have emerged that used epithelial cells derived from mouse lenses to generate 3D lentoids in culture [36, 37]. These engineered hollow spheroids produced using gelatin microbeads mimic the 3D microstructure and illustrate the possibility of engineering 3D organoids [36, 37].
1.2.5. Adipose Tissues
Adipose tissues can be produced with the self-assembly technique using adipose-derived stem/stromal cells (ASCs). Cell cultures supplemented with ascorbic acid and adipogenic differentiation factors generate substitutes that share many features with native adipose tissue [38].
1.2.6. Urologic Tissues
The reconstruction of bladder substitutes using the self-assembly technique has been inspired by the skin model, whereas ureter and urethra reconstruction has been based on tubular blood vessel models. Initially, bladder substitutes were produced using a porcine biopsy [39]. The bladder model was later enhanced by combining human dermal fibroblasts with porcine urothelial cells [40]. Substitutes were matured in a bioreactor in order to mimic the filling and voiding cycles of the bladder [41]. As human bladder biopsies became more easily available, similar techniques were used to produce human cell-derived substitutes [42, 43]. Furthermore, urethral substitutes were produced by seeding urothelial cells inside a tubular structure made of dermal stromal sheets [44]. To mimic the in vivo tissue architecture, the engineered constructs were perfused in a bioreactor [45]. Moreover, endothelial cells (EC) were also added to these models to reconstruct prevascularized models [46, 47]. These reconstructed urological tissues demonstrate histological and molecular similarities to native tissue. For example, the urothelium expresses uroplakins and zonula-occludens-1 in the epithelial superficial layer. These surface proteins are essential for tissue function as they act as a barrier to prevent urine leakage. These reconstructed urologic substitutes can also serve as invaluable tools for disease modeling. For instance, the bladder model has been used to study the effect of ketamine, a drug that is excreted in the urine. Ketamine was originally used as a medication for anesthesia and chronic pain management. However, the use of ketamine as a recreational drug can cause urinary tract side effects such as cystitis and urinary tract dysfunction [48]. The exposure of the 3D bladder model to ketamine has produced urothelium damage due to induced cell apoptosis [49].
1.2.7. Vaginal Mucosa
The tissue engineering of autologous vaginal mucosa opens the door to new surgical applications for vaginal reconstruction in paediatric patients with congenital urogenital abnormalities such as Müllerian agenesis, also known as the Mayer-Rokitansky-Küster-Hauser syndrome. A new human vaginal mucosa model using the self-assembly technique was recently introduced. This model is derived from human vaginal fibroblasts and epithelial cells, which were extracted from the vaginal biopsies of healthy donors [50]. Cell cultures were supplemented with 17-β estradiol in order to reproduce a hormone-responsive setting. The reconstructed tissues showed histological features that were similar to near-native tissue including a fully differentiated stratified squamous vaginal epithelium. Furthermore, vaginal epithelial cells expressed specific markers such as estrogen-β receptor and mucin-1. Also, the intermediate epithelial cell layers were filled with polysaccharides such as glycogen. The glycogen content of vaginal epithelial cells is metabolized by lactobacilli, a dominant bacteria of the normal vaginal microbiota that secretes lactic acid.
1.2.8. Bone
The self-assembly technique has recently been used to produce a thin bone substitute from ASCs that were differentiated into osteoblasts. In these tissues, alkaline phosphatase was homogeneously distributed and the substitutes showed a very low contractile capacity. Osteocalcin and hydroxyapatite were found in higher levels within the reconstructed bone from ASC than in non-osteogenically induced tissues [51].
2. Improving Stromal Thickness and the Mechanical Properties of Reconstructed Tissues
Although the self-assembly approach is suitable for clinical applications, the time and expenditure required for tissue reconstruction limit its wider use. To circumvent these major drawbacks, new strategies, aimed at increasing the ECM deposition rate and reorganization, have been proposed. In addition to reducing time and costs, these strategies also increase stromal thickness and improve mechanical properties.
2.1. Mechanical Stimulation
Major biological modifications in the organization of the cell cytoskeleton and the ECM composition can be induced by mechanical stimuli [52, 53]. For example, blood flow induces the realignment of collagen fibers, which, in turn, strengthens the tissue [54, 55]. These changes are induced by the activation of mechanoreceptors such as the ones containing the arginyl-glycyl-aspartic acid (RGD) integrin binding sites [56]. The signaling pathways of the extracellular signal-regulated kinase, ERK, and the c-Jun N-terminal kinase, c-JNK, are often activated to regulate cellular adaptation to these new environmental conditions [56]. In some studies, G-proteins also seem to be involved in molecular signaling [57]. Cellular responses to mechanical stimuli include the secretion of growth factors such as transforming growth factor-beta (TGF-β) [58], which is known to enhance ECM production and reduce matrix metalloproteinase (MMP) secretion and activation. Nevertheless, latent MMPs and other proteases can also be secreted or activated following mechanical stimuli [59, 60]. Fine-tuning is required to tightly control the balance between the synthesis of ECM elements and their degradation. As fibrosis has been observed in a mechanical overstimulation setting, the rate of collagen deposition needs to be controlled to prevent irreversible changes and fibrosis [61].
2.1.1. Cell Cultures in Dynamic Conditions
An appropriate laminar/cyclic flow in a bioreactor improves the quality of tubular constructs as demonstrated in the urethra [44] and blood vessel substitutes [62]. In order to evaluate the effect of dynamic culture conditions on tissue thickness, reconstructed connective substitutes generated with dermal fibroblasts or ASCs were subjected to static or dynamic conditions using a 3D shaker platform (gyrotwister) [63]. Dynamic culture conditions caused a 1.5- to 2-fold increase in the tissue thickness of the substitutes derived from ASCs when compared to static conditions. However, these results did not apply to stromal tissues made of dermal fibroblasts. Hence, it is not possible to conclude that dynamic conditions favor mechanical properties, as they have not yet been extensively measured.
2.1.2. Fiber Alignment within Engineered Tissues
Tissue function can be improved by using microstructured surfaces that control the interactions between cells and the ECM. The surface topography of an elastomeric material can cause a change in the orientation of fibers within multiple cell layers. Here the cell culture surface not only oriented the first cell layer, but also influenced the second cell layer. The latter took on a physiological alignment mimicking the native tissue. As the secreted ECM fibers align according to the orientation of the cells, well-structured stromal sheets can be obtained for cornea, vascular structures, and dermis [64]. Recently, a protocol adapted from the self-assembly technique allowed an easier production of tissues with horizontally aligned collagen fibers, which could be useful for cancer and ageing studies [65].
2.2. Enzymatic Reactions and Chemical Stimulation
ECM production can be increased by the supplementation of chemical inhibitors of MMP in cell cultures. The addition of galardin (GM-6001) during the production of skin substitutes significantly increased the thickness of reconstructed tissues [23]. Nevertheless, the use of galardin in the self-assembly technique is restricted because of its high price and its potential impact on the ECM. Galardin acts on the MMPs and could potentially modify the organization of the ECM and, consequently, affect the outcome of the reconstructed tissues.
Furthermore, proline is an important amino acid that is metabolized during collagen synthesis. Its metabolic precursor L-arginine (L-Arg) is converted into ornithine followed by glutamine semialdehyde and finally proline. An L-Arg enriched diet gave significant results in the treatment of wounds in vivo [66]. Hence, the effect of L-Arg supplementation on stroma formation was investigated. Although a 20% increase in type I collagen synthesis and secretion was observed, collagen deposition remained unchanged when compared to controls [47]. A plausible explanation for these results could be that the enzymes involved in collagen maturation were not sufficient to process the surplus of this protein in vitro.
2.3. Biological Stimulation
Biological stimulation of the ECM deposition is a challenge due to the pleiotropic roles of the usable bioactive agents and their subtle effects, which could have a long-term outcome (e.g., after tissue implantation). While experiments using monolayer culture rarely exceed days, studies using the self-assembly technique can last for months, especially if tissues are implanted in vivo. Many proteins, peptides, and lipids that are used to stimulate collagen synthesis and deposition must be carefully used to avoid the induction of a pathological situation such as fibrosis or cancer.
2.3.1. Polysaccharides
Beta-glucans, a family of carbohydrates, induce collagen production by fibroblasts [67, 68]. The supplementation of dermal fibroblast cultures with laminaran, which is derived from Saccharina longicruris seaweed, increases collagen secretion [69]. Tissues produced using the self-assembly technique with the addition of laminaran showed an increase in collagen synthesis and secretion without inducing a fibrotic phenotype. This results in a thicker stroma without a significant increase in cell proliferation nor in the alpha-smooth muscle actin content [70]. The mechanisms underlying the effect of laminaran could be due to its aggregation properties which could trigger a net increase in collagen secretion [70, 71].
Advanced glycation end-products (AGE) are derived from glucose metabolism and are found within the tissues of elderly or diabetic patients [72]. In cell culture, glucose is the primary source of energy for mesenchymal cells and provides the energy required to sustain ECM production. However, the glucose concentration used in the self-assembly protocol is 4.5-fold higher than normal glycaemia. Consequently, AGE can form within the produced tissues. Also, AGE are involved in the process of skin ageing and have an impact on mechanical and biological parameters [73]. New approaches that circumvent this issue, using glucose-free medium, are currently being developed and should generate promising alternatives [Chabaud et al. unpublished data].
2.3.2. Insulin
Insulin has been used for a long time to safely control the glycaemia of diabetic patients. In addition to its mediating role in glucose entry in cells, insulin also plays an active role in collagen synthesis and deposition [74]. Collagen fiber density in diabetic mouse models can be increased by the use of hydrogels containing microencapsulated insulin-secreting cells [75]. The implantation of PLGA alginate structures that release insulin in rats has also been shown to increase collagen deposition and maturation [76]. Furthermore, wound healing represents a clinical issue for diabetic patients, due in part to the alteration of their insulin metabolism.
2.3.3. Hypoxia
Diabetes is associated with tissue damage such as hypoxia and vascular disease. Evidence suggests that diabetes causes EC loss and that the tissues surrounding capillaries undergo hypoxia. Damaged EC release factors which may induce fibrosis [77]; however other unknown mechanisms also contribute to this change in cell phenotype [74, 78]. Insulin and hypoxia exert a synergic effect on tissues produced by the self-assembly technique. They increase collagen deposition in human and animal cell cultures [79] Chabaud et al. unpublished data. Nevertheless, the long-term effect of hypoxia exposure (more than 2 weeks) induced significant acidification of the cell culture medium, even when buffered solutions were used, and resulted in a decrease in tissue thickness [80]. Hence, cyclic hypoxia seems to be a better alternative than constitutive hypoxia as it produces thicker engineered tissues.
2.3.4. Adenosine
Adenosine and other derivatives have been used to enhance the rate of wound healing [81]. Their receptors were also found to be involved in fibrosis. An increase in collagen synthesis and a decrease in MMP-9 activity were observed when -adenosine receptors were activated [82, 83]. The production of rabbit tissues by the self-assembly approach in the presence of adenosine resulted in a net collagen content increase and in stromal thickening [79]. The effects of adenosine on human cell cultures remain to be evaluated.
2.3.5. Lysophosphatidic Acid
Lysophosphatidic acid (LPA) is a bioactive lipid present in human blood. LPA expression has been found to be upregulated in fibrosis and cancer [84, 85]. LPA binds to its receptors at the surface of many cells and activates pathways leading to proliferation, migration, and the secretion of cytokines. The culture of dermal fibroblasts with LPA resulted in a dose-dependent increase in type I collagen and fibronectin deposition that could be completely reversed. The addition of LPA to cell cultures did not have any adverse effects on the reconstructed substitutes nor did it influence cell proliferation [42]. The addition of LPA to cell cultures could reduce culture time by up to 25% as it enhances the rate of collagen deposition [42].
2.3.6. The Potential of Adult Stem Cells for Self-Assembly Tissue Engineering
Virtually all primary cell populations contain stem cells or at least potential progenitors [86]. For example, ASC can increase the amount of deposited ECM and, consequently, increase tissue thickness [63]. These cells can also secrete many proangiogenic and immunomodulatory factors [87]. The addition of a stromal sheet made of ASC to the bilayered reconstructed skin could possibly benefit in graft take and subsequent patient management.
Skin reconstruction could also benefit from another kind of adult stem cell, the sox10+ cells. Sox10+ adult stem cells are found in the stroma of subcutaneous loose connective tissues. They can differentiate into fibroblasts and myofibroblasts. Myofibroblasts secrete transitory ECM and are eliminated by apoptosis during the resolution phase of wound healing. However, these cells could induce fibrosis of the dermis, resulting in hypertrophic scarring characterized by excessive deposition of the ECM by persistent myofibroblasts [88]. A coculture of endothelial cells and Sox10+ stem cells resulted in the differentiation of Sox10+ stem cells into perivascular cells that stabilized the newly formed capillary-like network [89]. Although the use of Sox10+ stem cells requires a tight control of cell differentiation, they can be beneficial for ECM deposition and for capillary-like structure stabilization.
3. Other Improvements of Tissues Produced by the Self-Assembly Technique
3.1. Reseeding Self-Assembly Technique
In the original self-assembly technique protocols, several stromal sheets are stacked together to generate a construct with adequate mechanical strength. The mesenchymal cells are seeded on a cell culture compatible surface such as plastic or a gelatin-coated plastic. After cell confluence is reached, fibroblasts begin to deposit ECM. As cells are attached to the plastic surface of the bottom of the wells, the ECM is deposited above them. Thus the cells remain confined at the bottom of the wells and are only partially embedded in the ECM.
Although the steps of sheet stacking and fusion induce ECM remodelling, alternating layers of cells and ECM are visible at the sites of sheet stacking across the constructs. The addition of epithelial cells reduces the demarcation between sheets; however it remains visible in 3D tissues. These visible cell layers do not reflect native stroma architecture and could cause delamination [43, 47, 63, 90]. Changes in protocol (Figure 2) were proposed to ensure a more homogenous distribution of cells throughout the tissue and prevent delamination [47] (Figure 4(a)).
(a) Improvement in cell distribution by the reseeding technique
(b) Collagen deposition and MMP activation
(c) Endothelialization (EC fibroblast coseeding)
3.1.1. The Rationale of Reseeding
When fibroblasts reach confluence, they begin to secrete and deposit collagen to form the ECM. Collagen synthesis reaches a plateau after two weeks because of the inability of fibroblasts to physically assemble collagen fibers [47]. This plateau in the collagen deposition rate also correlates with the achievement of maximal tissue thickness [63]. Hence the idea is that the reseeding of mesenchymal cells on a quiescent 2-week-old stromal sheet would allow the restoration of the rate of collagen deposition and result in the production of thicker tissues.
3.1.2. Reseeding Self-Assembly Approach
The second layer of fibroblasts seeded onto the first sheet concomitantly induces a transitory peak of MMP activity and a boost in collagen deposition (Figure 4(b)). The fibroblasts within the first sheet layer play a role in the ECM remodelling process. Decellularization of this initial fibroblast layer prior to reseeding has shown a decrease in tissue thickness. The transitory peak of MMP activity observed after the reseeding step could partially contribute to the migration of fibroblasts from the plastic surface, where they were initially seeded, to the interior of the tissue and explain the better distribution of cells amongst the tissues generated using reseeding. After two additional weeks of culture, the single stroma sheets that had undergone reseeding had the same thickness as those that were produced by the sheet stacking method (Figure 4(a)). Furthermore, the reseeded tissues supported the maturation of a fully differentiated epithelium [47]. The reseeding technique offers an alternative to the classical self-assembly protocol which is easier to set up and reduces the costs associated with extensive culture medium consumption [47] as well as required incubator space (Figure 5). This new protocol paves the way to the automation process of the production of tissues by the self-assembly technique as it is expected to reduce costs and generate improved substitutes with optimized quality consistency.
3.2. Improvement of Blood Vessel Production
To improve the production of tissue-engineered blood vessels, fibroblasts and SMC were separately cultured in the same flask. Each cell population was grown in its respective half of the flask to generate a construct that was half stroma and half muscle. The sheet was later rolled around a cylindrical stent in such a way that the muscle half formed the interior of the vessel, while the other stroma half formed the external layers of the blood vessel construct (Figure 3). This strategy ensures better fusion between the layers and generates vascular substitutes that have a high-grade mechanical strength to sustain compatibility with engraftment [91–93].
3.3. Organ-Specific Stroma
As the interaction between different cell populations is important for tissue homeostasis, the origins of these cells greatly influence mesenchymal-epithelial interactions. The self-assembly technique depends on the ability of mesenchymal cells to secrete the ECM that serves as a scaffold for epithelial cells. Organ-specific cells, which correspond to mesenchymal and epithelial cells derived from the same organ, exhibit specific cell behavior that affects the quality of reconstructed tissues. For example, reconstructed human cornea substitutes showed macroscopic and histological differences depending on the source of mesenchymal cells used: dermal fibroblasts or corneal keratocytes, which are a mesenchymal cell population specific to the cornea [94]. Engineered tissues made with dermal fibroblasts were less transparent and lacked ultraviolet-absorption capability as compared to cornea produced using keratocytes [94]. If mesenchymal cells are important for adequate epithelial differentiation, epithelial cell origin is also important for obtaining an appropriate stroma organization [35].
The use of organ-specific mesenchymal cells instead of dermal fibroblasts to produce bladder mucosa substitutes ensures a better urothelial maturation as there is no expression of cytokeratin-14, a marker absent in native urothelium but present in epidermis, and which causes a significant decrease in ERK phosphorylation, a marker of cell proliferation [95].
The study of organ-specific models can also be applied in the context of disease modeling to identify the effect of the mesenchymal cells on epithelium differentiation. This has been elegantly illustrated with the creation of hybrid psoriasis models using a combination of healthy or psoriatic dermal fibroblasts with healthy or psoriatic keratinocytes. The combination of a stroma derived from psoriatic cells with healthy epithelial cells resulted in an altered epidermis, whereas the combination of a stroma derived from healthy cells with psoriatic epithelial cells resulted in an attenuated epithelial phenotype [20]. Hence, this model has given new insights into the partial effect of mesenchymal cells in the molecular processes involved in psoriasis [20].
4. Tissue Engineering with Serum-Free Medium
To this day, most laboratories still use animal serum for cell culture. Although the risks of using animal products have been long discussed, recent emerging pathologies point out that species barriers to the transmission of diseases are not fully supported by scientific arguments. This debate raised concerns about the use of animal products, including serum, to generate implantable devices or organs [96]. The use of animal serum in tissue-engineered organs produced by the self-assembly technique represents a critical issue that impedes clinical translation.
Serum use can impair cell differentiation and cause discrepancies in tissue quality from lot to lot [97, 98]. Human dermal equivalents have been produced by the self-assembly technique using a serum-free medium [99–103]. The resulting tissues presented a similar thickness or even a better one compared to those produced using fetal calf serum, and its organization was characterized at the molecular level. The horizontal development of epidermis was also demonstrated in the absence of serum [104].
5. Vascular and Lymphatic Endothelialization of Substitutes Reconstructed by the Self-Assembly Technique
5.1. The Endothelialization of Tissues Produced with the Self-Assembly Technique Accelerates Graft Perfusion
The compromised vascularization of reconstructed substitutes upon implantation represents an important cause of graft failure. To prevent graft necrosis, prevascularization strategies were proposed for the reconstructed tissues prior to implantation. The addition of EC to cell culture is a promising solution as EC have the ability to assemble and form capillary-like networks in vitro. Human endothelialized reconstructed skin constructs were generated by adapting the self-assembly technique. After four weeks of culture, EC were seeded on the surface of two stromal sheets. Later, these endothelialized stromal sheets were stacked together with an additional nonendothelialized stromal sheet placed at the apical surface of the new construct [105]. The human endothelialized reconstructed skin showed early signs of vascularization after implantation in mice as compared to the nonendothelialized controls. Vascularization in the endothelialized human skin constructs occurred within four days following tissue implantation, whereas it took 14 days in the controls [106]. The colocalization of human and host mouse EC inside a human capillary within the graft suggested the formation of chimeric microvessels and confirmed inosculation between both microvascular networks. Similar results were obtained after the implantation of endothelialized tubular urethral substitutes in mice [46].
5.2. The Improvement of Capillary-Like Network Distribution and Maturation
Although the technique previously described for the generation of endothelialized constructs allows the formation of a capillary-like network within the reconstructed tissues, EC remain confined between the stacked cell sheets and form a two-dimensional (2D) vascular network rather than a 3D one. In order to obtain an optimal 3D capillary network, EC were coseeded with dermal fibroblasts [47] (Figure 4(c)). The incorporation of EC in the reconstructed dermis also resulted in an increase in tissue elasticity and mechanical strength. As fibroblasts were seeded at high density, the ECM was quickly generated and rapidly embedded EC inside the stroma [47]. This new endothelialized stroma showed pericyte-like cells surrounding the capillary-like structures that expressed a neuron-glial 2 (NG2) marker.
5.3. Formation of a Lymphatic Microvascular Network
In recent studies, a lymphatic capillary network was formed within a dermal construct using the classic self-assembly approach [107, 108]. The integration of such a network can be important in order to rapidly restore lymphatic function within the graft.
6. Conclusion
The self-assembly approach has been used to generate several tissues for fundamental and clinical research applications. Over the years, substantial concomitant mechanical and biological improvements of the bioengineered substitutes have been achieved with protocol modifications. For instance, the use of organ-specific mesenchymal cells to produce stroma is associated with better epithelial differentiation. Despite the challenges regarding production costs and time, many strategies have been proposed in order to increase the rate of ECM production and decrease culture time. Finally, the endothelialization of engineered tissues represents a major optimization that could significantly contribute to graft survival.
Conflicts of Interest
The authors declare that there are no conflicts of interest regarding the publication of this article.
Authors’ Contributions
Ingrid Saba and Weronika Jakubowska contributed equally to the work.
Acknowledgments
This study was supported by grants from FRQS, CIHR, and the Fondation du CHU de Québec-CHA Hôpitaux Saint-Sacrement Enfant-Jésus. Dr. Stéphane Bolduc was a recipient of the CUA Scholarship Fund. The authors want to thank Cindy J. Hayward who edited the English language of the manuscript.